diff options
Diffstat (limited to 'drivers/net/fec_mxc.c')
| -rw-r--r-- | drivers/net/fec_mxc.c | 42 |
1 files changed, 37 insertions, 5 deletions
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 4cefda48e45..549d6486136 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -28,6 +28,14 @@ DECLARE_GLOBAL_DATA_PTR; */ #define FEC_XFER_TIMEOUT 5000 +/* + * The standard 32-byte DMA alignment does not work on mx6solox, which requires + * 64-byte alignment in the DMA RX FEC buffer. + * Introduce the FEC_DMA_RX_MINALIGN which can cover mx6solox needs and also + * satisfies the alignment on other SoCs (32-bytes) + */ +#define FEC_DMA_RX_MINALIGN 64 + #ifndef CONFIG_MII #error "CONFIG_MII has to be defined!" #endif @@ -711,13 +719,37 @@ static int fec_send(struct eth_device *dev, void *packet, int length) break; } - if (!timeout) + if (!timeout) { ret = -EINVAL; + goto out; + } - invalidate_dcache_range(addr, addr + size); - if (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY) + /* + * The TDAR bit is cleared when the descriptors are all out from TX + * but on mx6solox we noticed that the READY bit is still not cleared + * right after TDAR. + * These are two distinct signals, and in IC simulation, we found that + * TDAR always gets cleared prior than the READY bit of last BD becomes + * cleared. + * In mx6solox, we use a later version of FEC IP. It looks like that + * this intrinsic behaviour of TDAR bit has changed in this newer FEC + * version. + * + * Fix this by polling the READY bit of BD after the TDAR polling, + * which covers the mx6solox case and does not harm the other SoCs. + */ + timeout = FEC_XFER_TIMEOUT; + while (--timeout) { + invalidate_dcache_range(addr, addr + size); + if (!(readw(&fec->tbd_base[fec->tbd_index].status) & + FEC_TBD_READY)) + break; + } + + if (!timeout) ret = -EINVAL; +out: debug("fec_send: status 0x%x index %d ret %i\n", readw(&fec->tbd_base[fec->tbd_index].status), fec->tbd_index, ret); @@ -881,9 +913,9 @@ static int fec_alloc_descs(struct fec_priv *fec) /* Allocate RX buffers. */ /* Maximum RX buffer size. */ - size = roundup(FEC_MAX_PKT_SIZE, ARCH_DMA_MINALIGN); + size = roundup(FEC_MAX_PKT_SIZE, FEC_DMA_RX_MINALIGN); for (i = 0; i < FEC_RBD_NUM; i++) { - data = memalign(ARCH_DMA_MINALIGN, size); + data = memalign(FEC_DMA_RX_MINALIGN, size); if (!data) { printf("%s: error allocating rxbuf %d\n", __func__, i); goto err_ring; |