diff options
Diffstat (limited to 'drivers/serial/serial_pl01x.h')
| -rw-r--r-- | drivers/serial/serial_pl01x.h | 41 |
1 files changed, 22 insertions, 19 deletions
diff --git a/drivers/serial/serial_pl01x.h b/drivers/serial/serial_pl01x.h index 5f20fdd108a..b670c24e11f 100644 --- a/drivers/serial/serial_pl01x.h +++ b/drivers/serial/serial_pl01x.h @@ -29,10 +29,28 @@ * Definitions common to both PL010 & PL011 * */ -#define UART_PL01x_DR 0x00 /* Data read or written from the interface. */ -#define UART_PL01x_RSR 0x04 /* Receive status register (Read). */ -#define UART_PL01x_ECR 0x04 /* Error clear register (Write). */ -#define UART_PL01x_FR 0x18 /* Flag register (Read only). */ + +#ifndef __ASSEMBLY__ +/* + * We can use a combined structure for PL010 and PL011, because they overlap + * only in common registers. + */ +struct pl01x_regs { + u32 dr; /* 0x00 Data register */ + u32 ecr; /* 0x04 Error clear register (Write) */ + u32 pl010_lcrh; /* 0x08 Line control register, high byte */ + u32 pl010_lcrm; /* 0x0C Line control register, middle byte */ + u32 pl010_lcrl; /* 0x10 Line control register, low byte */ + u32 pl010_cr; /* 0x14 Control register */ + u32 fr; /* 0x18 Flag register (Read only) */ + u32 reserved; + u32 ilpr; /* 0x20 IrDA low-power counter register */ + u32 pl011_ibrd; /* 0x24 Integer baud rate register */ + u32 pl011_fbrd; /* 0x28 Fractional baud rate register */ + u32 pl011_lcrh; /* 0x2C Line control register */ + u32 pl011_cr; /* 0x30 Control register */ +}; +#endif #define UART_PL01x_RSR_OE 0x08 #define UART_PL01x_RSR_BE 0x04 @@ -50,14 +68,6 @@ * PL010 definitions * */ -#define UART_PL010_LCRH 0x08 /* Line control register, high byte. */ -#define UART_PL010_LCRM 0x0C /* Line control register, middle byte. */ -#define UART_PL010_LCRL 0x10 /* Line control register, low byte. */ -#define UART_PL010_CR 0x14 /* Control register. */ -#define UART_PL010_IIR 0x1C /* Interrupt indentification register (Read). */ -#define UART_PL010_ICR 0x1C /* Interrupt clear register (Write). */ -#define UART_PL010_ILPR 0x20 /* IrDA low power counter register. */ - #define UART_PL010_CR_LPE (1 << 7) #define UART_PL010_CR_RTIE (1 << 6) #define UART_PL010_CR_TIE (1 << 5) @@ -93,13 +103,6 @@ * PL011 definitions * */ -#define UART_PL011_IBRD 0x24 -#define UART_PL011_FBRD 0x28 -#define UART_PL011_LCRH 0x2C -#define UART_PL011_CR 0x30 -#define UART_PL011_IMSC 0x38 -#define UART_PL011_PERIPH_ID0 0xFE0 - #define UART_PL011_LCRH_SPS (1 << 7) #define UART_PL011_LCRH_WLEN_8 (3 << 5) #define UART_PL011_LCRH_WLEN_7 (2 << 5) |