diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/serial_pxa.c | 385 |
2 files changed, 386 insertions, 0 deletions
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 14c818decc4..4a35703d222 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -44,6 +44,7 @@ COBJS-$(CONFIG_MX31_UART) += serial_mx31.o COBJS-$(CONFIG_NETARM_SERIAL) += serial_netarm.o COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o +COBJS-$(CONFIG_PXA_SERIAL) += serial_pxa.o COBJS-$(CONFIG_SA1100_SERIAL) += serial_sa1100.o COBJS-$(CONFIG_S3C24X0_SERIAL) += serial_s3c24x0.o COBJS-$(CONFIG_S3C44B0_SERIAL) += serial_s3c44b0.o diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c new file mode 100644 index 00000000000..9ba457e75aa --- /dev/null +++ b/drivers/serial/serial_pxa.c @@ -0,0 +1,385 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> +#include <watchdog.h> +#include <serial.h> +#include <asm/arch/pxa-regs.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define FFUART_INDEX 0 +#define BTUART_INDEX 1 +#define STUART_INDEX 2 + +#ifndef CONFIG_SERIAL_MULTI +#if defined (CONFIG_FFUART) +#define UART_INDEX FFUART_INDEX +#elif defined (CONFIG_BTUART) +#define UART_INDEX BTUART_INDEX +#elif defined (CONFIG_STUART) +#define UART_INDEX STUART_INDEX +#else +#error "Bad: you didn't configure serial ..." +#endif +#endif + +void pxa_setbrg_dev (unsigned int uart_index) +{ + unsigned int quot = 0; + + if (gd->baudrate == 1200) + quot = 768; + else if (gd->baudrate == 9600) + quot = 96; + else if (gd->baudrate == 19200) + quot = 48; + else if (gd->baudrate == 38400) + quot = 24; + else if (gd->baudrate == 57600) + quot = 16; + else if (gd->baudrate == 115200) + quot = 8; + else + hang (); + + switch (uart_index) { + case FFUART_INDEX: +#ifdef CONFIG_CPU_MONAHANS + CKENA |= CKENA_22_FFUART; +#else + CKEN |= CKEN6_FFUART; +#endif /* CONFIG_CPU_MONAHANS */ + + FFIER = 0; /* Disable for now */ + FFFCR = 0; /* No fifos enabled */ + + /* set baud rate */ + FFLCR = LCR_WLS0 | LCR_WLS1 | LCR_DLAB; + FFDLL = quot & 0xff; + FFDLH = quot >> 8; + FFLCR = LCR_WLS0 | LCR_WLS1; + + FFIER = IER_UUE; /* Enable FFUART */ + break; + + case BTUART_INDEX: +#ifdef CONFIG_CPU_MONAHANS + CKENA |= CKENA_21_BTUART; +#else + CKEN |= CKEN7_BTUART; +#endif /* CONFIG_CPU_MONAHANS */ + + BTIER = 0; + BTFCR = 0; + + /* set baud rate */ + BTLCR = LCR_DLAB; + BTDLL = quot & 0xff; + BTDLH = quot >> 8; + BTLCR = LCR_WLS0 | LCR_WLS1; + + BTIER = IER_UUE; /* Enable BFUART */ + + break; + + case STUART_INDEX: +#ifdef CONFIG_CPU_MONAHANS + CKENA |= CKENA_23_STUART; +#else + CKEN |= CKEN5_STUART; +#endif /* CONFIG_CPU_MONAHANS */ + + STIER = 0; + STFCR = 0; + + /* set baud rate */ + STLCR = LCR_DLAB; + STDLL = quot & 0xff; + STDLH = quot >> 8; + STLCR = LCR_WLS0 | LCR_WLS1; + + STIER = IER_UUE; /* Enable STUART */ + break; + + default: + hang(); + } +} + + +/* + * Initialise the serial port with the given baudrate. The settings + * are always 8 data bits, no parity, 1 stop bit, no start bits. + * + */ +int pxa_init_dev (unsigned int uart_index) +{ + pxa_setbrg_dev (uart_index); + + return (0); +} + + +/* + * Output a single byte to the serial port. + */ +void pxa_putc_dev (unsigned int uart_index,const char c) +{ + switch (uart_index) { + case FFUART_INDEX: + /* wait for room in the tx FIFO on FFUART */ + while ((FFLSR & LSR_TEMT) == 0) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + FFTHR = c; + break; + + case BTUART_INDEX: + while ((BTLSR & LSR_TEMT ) == 0 ) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + BTTHR = c; + break; + + case STUART_INDEX: + while ((STLSR & LSR_TEMT ) == 0 ) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + STTHR = c; + break; + } + + /* If \n, also do \r */ + if (c == '\n') + pxa_putc_dev (uart_index,'\r'); +} + +/* + * Read a single byte from the serial port. Returns 1 on success, 0 + * otherwise. When the function is succesfull, the character read is + * written into its argument c. + */ +int pxa_tstc_dev (unsigned int uart_index) +{ + switch (uart_index) { + case FFUART_INDEX: + return FFLSR & LSR_DR; + case BTUART_INDEX: + return BTLSR & LSR_DR; + case STUART_INDEX: + return STLSR & LSR_DR; + } + return -1; +} + +/* + * Read a single byte from the serial port. Returns 1 on success, 0 + * otherwise. When the function is succesfull, the character read is + * written into its argument c. + */ +int pxa_getc_dev (unsigned int uart_index) +{ + switch (uart_index) { + case FFUART_INDEX: + while (!(FFLSR & LSR_DR)) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + return (char) FFRBR & 0xff; + + case BTUART_INDEX: + while (!(BTLSR & LSR_DR)) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + return (char) BTRBR & 0xff; + case STUART_INDEX: + while (!(STLSR & LSR_DR)) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + return (char) STRBR & 0xff; + } + return -1; +} + +void +pxa_puts_dev (unsigned int uart_index,const char *s) +{ + while (*s) { + pxa_putc_dev (uart_index,*s++); + } +} + +#if defined (CONFIG_FFUART) +static int ffuart_init(void) +{ + return pxa_init_dev(FFUART_INDEX); +} + +static void ffuart_setbrg(void) +{ + return pxa_setbrg_dev(FFUART_INDEX); +} + +static void ffuart_putc(const char c) +{ + return pxa_putc_dev(FFUART_INDEX,c); +} + +static void ffuart_puts(const char *s) +{ + return pxa_puts_dev(FFUART_INDEX,s); +} + +static int ffuart_getc(void) +{ + return pxa_getc_dev(FFUART_INDEX); +} + +static int ffuart_tstc(void) +{ + return pxa_tstc_dev(FFUART_INDEX); +} + +struct serial_device serial_ffuart_device = +{ + "serial_ffuart", + "PXA", + ffuart_init, + ffuart_setbrg, + ffuart_getc, + ffuart_tstc, + ffuart_putc, + ffuart_puts, +}; +#endif + +#if defined (CONFIG_BTUART) +static int btuart_init(void) +{ + return pxa_init_dev(BTUART_INDEX); +} + +static void btuart_setbrg(void) +{ + return pxa_setbrg_dev(BTUART_INDEX); +} + +static void btuart_putc(const char c) +{ + return pxa_putc_dev(BTUART_INDEX,c); +} + +static void btuart_puts(const char *s) +{ + return pxa_puts_dev(BTUART_INDEX,s); +} + +static int btuart_getc(void) +{ + return pxa_getc_dev(BTUART_INDEX); +} + +static int btuart_tstc(void) +{ + return pxa_tstc_dev(BTUART_INDEX); +} + +struct serial_device serial_btuart_device = +{ + "serial_btuart", + "PXA", + btuart_init, + btuart_setbrg, + btuart_getc, + btuart_tstc, + btuart_putc, + btuart_puts, +}; +#endif + +#if defined (CONFIG_STUART) +static int stuart_init(void) +{ + return pxa_init_dev(STUART_INDEX); +} + +static void stuart_setbrg(void) +{ + return pxa_setbrg_dev(STUART_INDEX); +} + +static void stuart_putc(const char c) +{ + return pxa_putc_dev(STUART_INDEX,c); +} + +static void stuart_puts(const char *s) +{ + return pxa_puts_dev(STUART_INDEX,s); +} + +static int stuart_getc(void) +{ + return pxa_getc_dev(STUART_INDEX); +} + +static int stuart_tstc(void) +{ + return pxa_tstc_dev(STUART_INDEX); +} + +struct serial_device serial_stuart_device = +{ + "serial_stuart", + "PXA", + stuart_init, + stuart_setbrg, + stuart_getc, + stuart_tstc, + stuart_putc, + stuart_puts, +}; +#endif + + +#ifndef CONFIG_SERIAL_MULTI +inline int serial_init(void) { + return (pxa_init_dev(UART_INDEX)); +} +void serial_setbrg(void) { + pxa_setbrg_dev(UART_INDEX); +} +int serial_getc(void) { + return(pxa_getc_dev(UART_INDEX)); +} +int serial_tstc(void) { + return(pxa_tstc_dev(UART_INDEX)); +} +void serial_putc(const char c) { + pxa_putc_dev(UART_INDEX,c); +} +void serial_puts(const char *s) { + pxa_puts_dev(UART_INDEX,s); +} +#endif /* CONFIG_SERIAL_MULTI */ |