aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/fsl_qspi.c58
1 files changed, 52 insertions, 6 deletions
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
index db7ebee972f..75cbab2676c 100644
--- a/drivers/spi/fsl_qspi.c
+++ b/drivers/spi/fsl_qspi.c
@@ -44,6 +44,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define SEQID_RDEAR 11
#define SEQID_WREAR 12
#endif
+#define SEQID_WRAR 13
+#define SEQID_RDAR 14
/* QSPI CMD */
#define QSPI_CMD_PP 0x02 /* Page program (up to 256 bytes) */
@@ -63,6 +65,10 @@ DECLARE_GLOBAL_DATA_PTR;
#define QSPI_CMD_BRRD 0x16 /* Bank register read */
#define QSPI_CMD_BRWR 0x17 /* Bank register write */
+/* Used for Spansion S25FS-S family flash only. */
+#define QSPI_CMD_RDAR 0x65 /* Read any device register */
+#define QSPI_CMD_WRAR 0x71 /* Write any device register */
+
/* 4-byte address QSPI CMD - used on Spansion and some Macronix flashes */
#define QSPI_CMD_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */
#define QSPI_CMD_PP_4B 0x12 /* Page program (up to 256 bytes) */
@@ -317,6 +323,33 @@ static void qspi_set_lut(struct fsl_qspi_priv *priv)
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
PAD1(LUT_PAD1) | INSTR1(LUT_WRITE));
#endif
+
+ /*
+ * Read any device register.
+ * Used for Spansion S25FS-S family flash only.
+ */
+ lut_base = SEQID_RDAR * 4;
+ qspi_write32(priv->flags, &regs->lut[lut_base],
+ OPRND0(QSPI_CMD_RDAR) | PAD0(LUT_PAD1) |
+ INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+ qspi_write32(priv->flags, &regs->lut[lut_base + 1],
+ OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) |
+ OPRND1(1) | PAD1(LUT_PAD1) |
+ INSTR1(LUT_READ));
+
+ /*
+ * Write any device register.
+ * Used for Spansion S25FS-S family flash only.
+ */
+ lut_base = SEQID_WRAR * 4;
+ qspi_write32(priv->flags, &regs->lut[lut_base],
+ OPRND0(QSPI_CMD_WRAR) | PAD0(LUT_PAD1) |
+ INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+ qspi_write32(priv->flags, &regs->lut[lut_base + 1],
+ OPRND0(1) | PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
+
/* Lock the LUT */
qspi_write32(priv->flags, &regs->lutkey, LUT_KEY_VALUE);
qspi_write32(priv->flags, &regs->lckcr, QSPI_LCKCR_LOCK);
@@ -510,7 +543,6 @@ static void qspi_op_rdid(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
qspi_write32(priv->flags, &regs->mcr, mcr_reg);
}
-#ifndef CONFIG_SYS_FSL_QSPI_AHB
/* If not use AHB read, read data from ip interface */
static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
{
@@ -518,6 +550,12 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
u32 mcr_reg, data;
int i, size;
u32 to_or_from;
+ u32 seqid;
+
+ if (priv->cur_seqid == QSPI_CMD_RDAR)
+ seqid = SEQID_RDAR;
+ else
+ seqid = SEQID_FAST_READ;
mcr_reg = qspi_read32(priv->flags, &regs->mcr);
qspi_write32(priv->flags, &regs->mcr,
@@ -536,7 +574,7 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
RX_BUFFER_SIZE : len;
qspi_write32(priv->flags, &regs->ipcr,
- (SEQID_FAST_READ << QSPI_IPCR_SEQID_SHIFT) |
+ (seqid << QSPI_IPCR_SEQID_SHIFT) |
size);
while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
;
@@ -548,7 +586,10 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
while ((RX_BUFFER_SIZE >= size) && (size > 0)) {
data = qspi_read32(priv->flags, &regs->rbdr[i]);
data = qspi_endian_xchg(data);
- memcpy(rxbuf, &data, 4);
+ if (size < 4)
+ memcpy(rxbuf, &data, size);
+ else
+ memcpy(rxbuf, &data, 4);
rxbuf++;
size -= 4;
i++;
@@ -560,7 +601,6 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
qspi_write32(priv->flags, &regs->mcr, mcr_reg);
}
-#endif
static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
{
@@ -601,6 +641,8 @@ static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
/* Default is page programming */
seqid = SEQID_PP;
+ if (priv->cur_seqid == QSPI_CMD_WRAR)
+ seqid = SEQID_WRAR;
#ifdef CONFIG_SPI_FLASH_BAR
if (priv->cur_seqid == QSPI_CMD_BRWR)
seqid = SEQID_BRWR;
@@ -725,13 +767,15 @@ int qspi_xfer(struct fsl_qspi_priv *priv, unsigned int bitlen,
return 0;
}
- if (priv->cur_seqid == QSPI_CMD_FAST_READ) {
+ if (priv->cur_seqid == QSPI_CMD_FAST_READ ||
+ priv->cur_seqid == QSPI_CMD_RDAR) {
priv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
} else if ((priv->cur_seqid == QSPI_CMD_SE) ||
(priv->cur_seqid == QSPI_CMD_BE_4K)) {
priv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
qspi_op_erase(priv);
- } else if (priv->cur_seqid == QSPI_CMD_PP) {
+ } else if (priv->cur_seqid == QSPI_CMD_PP ||
+ priv->cur_seqid == QSPI_CMD_WRAR) {
wr_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK;
} else if ((priv->cur_seqid == QSPI_CMD_BRWR) ||
(priv->cur_seqid == QSPI_CMD_WREAR)) {
@@ -748,6 +792,8 @@ int qspi_xfer(struct fsl_qspi_priv *priv, unsigned int bitlen,
#else
qspi_op_read(priv, din, bytes);
#endif
+ } else if (priv->cur_seqid == QSPI_CMD_RDAR) {
+ qspi_op_read(priv, din, bytes);
} else if (priv->cur_seqid == QSPI_CMD_RDID)
qspi_op_rdid(priv, din, bytes);
else if (priv->cur_seqid == QSPI_CMD_RDSR)