diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/Kconfig | 2 | ||||
-rw-r--r-- | drivers/usb/common/Makefile | 4 | ||||
-rw-r--r-- | drivers/usb/common/usb_urb.c | 160 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-generic.c | 30 | ||||
-rw-r--r-- | drivers/usb/host/r8a66597-hcd.c | 30 | ||||
-rw-r--r-- | drivers/usb/isp1760/Kconfig | 12 | ||||
-rw-r--r-- | drivers/usb/isp1760/Makefile | 6 | ||||
-rw-r--r-- | drivers/usb/isp1760/isp1760-core.c | 380 | ||||
-rw-r--r-- | drivers/usb/isp1760/isp1760-core.h | 96 | ||||
-rw-r--r-- | drivers/usb/isp1760/isp1760-hcd.c | 2477 | ||||
-rw-r--r-- | drivers/usb/isp1760/isp1760-hcd.h | 81 | ||||
-rw-r--r-- | drivers/usb/isp1760/isp1760-if.c | 125 | ||||
-rw-r--r-- | drivers/usb/isp1760/isp1760-regs.h | 292 | ||||
-rw-r--r-- | drivers/usb/isp1760/isp1760-uboot.c | 75 | ||||
-rw-r--r-- | drivers/usb/isp1760/isp1760-uboot.h | 27 | ||||
-rw-r--r-- | drivers/usb/musb-new/musb_core.c | 2 | ||||
-rw-r--r-- | drivers/usb/musb-new/musb_host.c | 2 | ||||
-rw-r--r-- | drivers/usb/musb-new/musb_host.h | 2 | ||||
-rw-r--r-- | drivers/usb/musb-new/musb_uboot.c | 38 | ||||
-rw-r--r-- | drivers/usb/musb-new/musb_uboot.h | 2 | ||||
-rw-r--r-- | drivers/usb/musb-new/usb-compat.h | 79 |
21 files changed, 3773 insertions, 149 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index ab1d061bd0d..86804166de3 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -68,6 +68,8 @@ config SPL_DM_USB_GADGET source "drivers/usb/host/Kconfig" +source "drivers/usb/isp1760/Kconfig" + source "drivers/usb/cdns3/Kconfig" source "drivers/usb/dwc3/Kconfig" diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile index 3bedbf213f4..2e9353b76a6 100644 --- a/drivers/usb/common/Makefile +++ b/drivers/usb/common/Makefile @@ -4,5 +4,9 @@ # obj-$(CONFIG_$(SPL_)DM_USB) += common.o +obj-$(CONFIG_USB_ISP1760) += usb_urb.o +obj-$(CONFIG_USB_MUSB_HOST) += usb_urb.o +obj-$(CONFIG_USB_MUSB_GADGET) += usb_urb.o +obj-$(CONFIG_USB_R8A66597_HCD) += usb_urb.o obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o fsl-errata.o obj-$(CONFIG_USB_XHCI_FSL) += fsl-dt-fixup.o fsl-errata.o diff --git a/drivers/usb/common/usb_urb.c b/drivers/usb/common/usb_urb.c new file mode 100644 index 00000000000..be3b6b9f32e --- /dev/null +++ b/drivers/usb/common/usb_urb.c @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common code for usb urb handling, based on the musb-new code + * + * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org> + * + */ + +#include <dm/device.h> +#include <dm/device_compat.h> +#include <linux/usb/usb_urb_compat.h> + +#include <time.h> +#include <usb.h> + +#if CONFIG_IS_ENABLED(DM_USB) +struct usb_device *usb_dev_get_parent(struct usb_device *udev) +{ + struct udevice *parent = udev->dev->parent; + + /* + * When called from usb-uclass.c: usb_scan_device() udev->dev points + * to the parent udevice, not the actual udevice belonging to the + * udev as the device is not instantiated yet. + * + * If dev is an usb-bus, then we are called from usb_scan_device() for + * an usb-device plugged directly into the root port, return NULL. + */ + if (device_get_uclass_id(udev->dev) == UCLASS_USB) + return NULL; + + /* + * If these 2 are not the same we are being called from + * usb_scan_device() and udev itself is the parent. + */ + if (dev_get_parent_priv(udev->dev) != udev) + return udev; + + /* We are being called normally, use the parent pointer */ + if (device_get_uclass_id(parent) == UCLASS_USB_HUB) + return dev_get_parent_priv(parent); + + return NULL; +} +#else +struct usb_device *usb_dev_get_parent(struct usb_device *udev) +{ + return udev->parent; +} +#endif + +static void usb_urb_complete(struct urb *urb) +{ + urb->dev->status &= ~USB_ST_NOT_PROC; + urb->dev->act_len = urb->actual_length; + + if (urb->status == -EINPROGRESS) + urb->status = 0; +} + +void usb_urb_fill(struct urb *urb, struct usb_host_endpoint *hep, + struct usb_device *dev, int endpoint_type, + unsigned long pipe, void *buffer, int len, + struct devrequest *setup, int interval) +{ + int epnum = usb_pipeendpoint(pipe); + int is_in = usb_pipein(pipe); + u16 maxpacketsize = is_in ? dev->epmaxpacketin[epnum] : + dev->epmaxpacketout[epnum]; + + memset(urb, 0, sizeof(struct urb)); + memset(hep, 0, sizeof(struct usb_host_endpoint)); + INIT_LIST_HEAD(&hep->urb_list); + INIT_LIST_HEAD(&urb->urb_list); + urb->ep = hep; + urb->complete = usb_urb_complete; + urb->status = -EINPROGRESS; + urb->dev = dev; + urb->pipe = pipe; + urb->transfer_buffer = buffer; + urb->transfer_dma = (unsigned long)buffer; + urb->transfer_buffer_length = len; + urb->setup_packet = (unsigned char *)setup; + + urb->ep->desc.wMaxPacketSize = __cpu_to_le16(maxpacketsize); + urb->ep->desc.bmAttributes = endpoint_type; + urb->ep->desc.bEndpointAddress = ((is_in ? USB_DIR_IN : USB_DIR_OUT) | + epnum); + urb->ep->desc.bInterval = interval; +} + +int usb_urb_submit(struct usb_hcd *hcd, struct urb *urb) +{ + const struct usb_urb_ops *ops = hcd->urb_ops; + unsigned long timeout; + int ret; + + if (!ops) + return -EINVAL; + + ret = ops->urb_enqueue(hcd, urb, 0); + if (ret < 0) { + printf("Failed to enqueue URB to controller\n"); + return ret; + } + + timeout = get_timer(0) + USB_TIMEOUT_MS(urb->pipe); + do { + if (ctrlc()) + return -EIO; + ops->isr(0, hcd); + } while (urb->status == -EINPROGRESS && get_timer(0) < timeout); + + if (urb->status == -EINPROGRESS) + ops->urb_dequeue(hcd, urb, -ETIME); + + return urb->status; +} + +int usb_urb_submit_control(struct usb_hcd *hcd, struct urb *urb, + struct usb_host_endpoint *hep, + struct usb_device *dev, unsigned long pipe, + void *buffer, int len, struct devrequest *setup, + int interval, enum usb_device_speed speed) +{ + const struct usb_urb_ops *ops = hcd->urb_ops; + + usb_urb_fill(urb, hep, dev, USB_ENDPOINT_XFER_CONTROL, pipe, buffer, + len, setup, 0); + + /* Fix speed for non hub-attached devices */ + if (!usb_dev_get_parent(dev)) { + dev->speed = speed; + if (ops->hub_control) + return ops->hub_control(hcd, dev, pipe, buffer, len, + setup); + } + + return usb_urb_submit(hcd, urb); +} + +int usb_urb_submit_bulk(struct usb_hcd *hcd, struct urb *urb, + struct usb_host_endpoint *hep, struct usb_device *dev, + unsigned long pipe, void *buffer, int len) +{ + usb_urb_fill(urb, hep, dev, USB_ENDPOINT_XFER_BULK, pipe, buffer, len, + NULL, 0); + + return usb_urb_submit(hcd, urb); +} + +int usb_urb_submit_irq(struct usb_hcd *hcd, struct urb *urb, + struct usb_host_endpoint *hep, struct usb_device *dev, + unsigned long pipe, void *buffer, int len, int interval) +{ + usb_urb_fill(urb, hep, dev, USB_ENDPOINT_XFER_INT, pipe, buffer, len, + NULL, interval); + + return usb_urb_submit(hcd, urb); +} diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c index c5310e465cb..466b25a0c38 100644 --- a/drivers/usb/dwc3/dwc3-generic.c +++ b/drivers/usb/dwc3/dwc3-generic.c @@ -26,6 +26,7 @@ #include <reset.h> #include <clk.h> #include <usb/xhci.h> +#include <asm/gpio.h> struct dwc3_glue_data { struct clk_bulk clks; @@ -43,6 +44,7 @@ struct dwc3_generic_priv { void *base; struct dwc3 dwc3; struct phy_bulk phys; + struct gpio_desc ulpi_reset; }; struct dwc3_generic_host_priv { @@ -78,6 +80,27 @@ static int dwc3_generic_probe(struct udevice *dev, if (rc && rc != -ENOTSUPP) return rc; + if (CONFIG_IS_ENABLED(DM_GPIO) && + device_is_compatible(dev->parent, "xlnx,zynqmp-dwc3")) { + rc = gpio_request_by_name(dev->parent, "reset-gpios", 0, + &priv->ulpi_reset, GPIOD_ACTIVE_LOW); + if (rc) + return rc; + + /* Toggle ulpi to reset the phy. */ + rc = dm_gpio_set_value(&priv->ulpi_reset, 1); + if (rc) + return rc; + + mdelay(5); + + rc = dm_gpio_set_value(&priv->ulpi_reset, 0); + if (rc) + return rc; + + mdelay(5); + } + if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3")) reset_deassert_bulk(&glue->resets); @@ -99,6 +122,13 @@ static int dwc3_generic_remove(struct udevice *dev, { struct dwc3 *dwc3 = &priv->dwc3; + if (CONFIG_IS_ENABLED(DM_GPIO) && + device_is_compatible(dev->parent, "xlnx,zynqmp-dwc3")) { + struct gpio_desc *ulpi_reset = &priv->ulpi_reset; + + dm_gpio_free(ulpi_reset->dev, ulpi_reset); + } + dwc3_remove(dwc3); dwc3_shutdown_phy(dev, &priv->phys); unmap_physmem(dwc3->regs, MAP_NOCACHE); diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index f1fc93f3d40..3ccbc16da37 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -14,6 +14,7 @@ #include <dm/device_compat.h> #include <linux/delay.h> #include <linux/iopoll.h> +#include <linux/usb/usb_urb_compat.h> #include <power/regulator.h> #include "r8a66597.h" @@ -24,35 +25,6 @@ #define R8A66597_DPRINT(...) #endif -static inline struct usb_device *usb_dev_get_parent(struct usb_device *udev) -{ - struct udevice *parent = udev->dev->parent; - - /* - * When called from usb-uclass.c: usb_scan_device() udev->dev points - * to the parent udevice, not the actual udevice belonging to the - * udev as the device is not instantiated yet. - * - * If dev is an usb-bus, then we are called from usb_scan_device() for - * an usb-device plugged directly into the root port, return NULL. - */ - if (device_get_uclass_id(udev->dev) == UCLASS_USB) - return NULL; - - /* - * If these 2 are not the same we are being called from - * usb_scan_device() and udev itself is the parent. - */ - if (dev_get_parent_priv(udev->dev) != udev) - return udev; - - /* We are being called normally, use the parent pointer */ - if (device_get_uclass_id(parent) == UCLASS_USB_HUB) - return dev_get_parent_priv(parent); - - return NULL; -} - static void get_hub_data(struct usb_device *dev, u16 *hub_devnum, u16 *hubport) { struct usb_device *parent = usb_dev_get_parent(dev); diff --git a/drivers/usb/isp1760/Kconfig b/drivers/usb/isp1760/Kconfig new file mode 100644 index 00000000000..993d71e74cd --- /dev/null +++ b/drivers/usb/isp1760/Kconfig @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 + +config USB_ISP1760 + tristate "NXP ISP 1760/1761/1763 support" + select DM_USB + select USB_HOST + help + Say Y or M here if your system as an ISP1760/1761/1763 USB host + controller. + + This USB controller is usually attached to a non-DMA-Master + capable bus. diff --git a/drivers/usb/isp1760/Makefile b/drivers/usb/isp1760/Makefile new file mode 100644 index 00000000000..2c809c01b11 --- /dev/null +++ b/drivers/usb/isp1760/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +isp1760-y := isp1760-core.o isp1760-if.o isp1760-uboot.o isp1760-hcd.o + +#isp1760-hcd.o + +obj-$(CONFIG_USB_ISP1760) += isp1760.o diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c new file mode 100644 index 00000000000..31dfdae6c99 --- /dev/null +++ b/drivers/usb/isp1760/isp1760-core.c @@ -0,0 +1,380 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the NXP ISP1760 chip + * + * Copyright 2022 Linaro, Rui Miguel Silva <rui.silva@linaro.org> + * + * This is based on linux kernel driver, original developed: + * Copyright 2014 Laurent Pinchart + * Copyright 2007 Sebastian Siewior + * + */ + +#include <dm.h> +#include <dm/device-internal.h> +#include <dm/device_compat.h> +#include <dm/devres.h> +#include <linux/compat.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <regmap.h> +#include <usb.h> + +#include "isp1760-core.h" +#include "isp1760-hcd.h" +#include "isp1760-regs.h" + +#define msleep(a) udelay((a) * 1000) + +static int isp1760_init_core(struct isp1760_device *isp) +{ + struct isp1760_hcd *hcd = &isp->hcd; + + /* + * Reset the host controller, including the CPU interface + * configuration. + */ + isp1760_field_set(hcd->fields, SW_RESET_RESET_ALL); + msleep(100); + + /* Setup HW Mode Control: This assumes a level active-low interrupt */ + if ((isp->devflags & ISP1760_FLAG_ANALOG_OC) && hcd->is_isp1763) + return -EINVAL; + + if (isp->devflags & ISP1760_FLAG_BUS_WIDTH_16) + isp1760_field_clear(hcd->fields, HW_DATA_BUS_WIDTH); + if (isp->devflags & ISP1760_FLAG_BUS_WIDTH_8) + isp1760_field_set(hcd->fields, HW_DATA_BUS_WIDTH); + if (isp->devflags & ISP1760_FLAG_ANALOG_OC) + isp1760_field_set(hcd->fields, HW_ANA_DIGI_OC); + if (isp->devflags & ISP1760_FLAG_DACK_POL_HIGH) + isp1760_field_set(hcd->fields, HW_DACK_POL_HIGH); + if (isp->devflags & ISP1760_FLAG_DREQ_POL_HIGH) + isp1760_field_set(hcd->fields, HW_DREQ_POL_HIGH); + if (isp->devflags & ISP1760_FLAG_INTR_POL_HIGH) + isp1760_field_set(hcd->fields, HW_INTR_HIGH_ACT); + if (isp->devflags & ISP1760_FLAG_INTR_EDGE_TRIG) + isp1760_field_set(hcd->fields, HW_INTR_EDGE_TRIG); + + /* + * The ISP1761 has a dedicated DC IRQ line but supports sharing the HC + * IRQ line for both the host and device controllers. Hardcode IRQ + * sharing for now and disable the DC interrupts globally to avoid + * spurious interrupts during HCD registration. + */ + if (isp->devflags & ISP1760_FLAG_ISP1761) { + isp1760_reg_write(hcd->regs, ISP176x_DC_MODE, 0); + isp1760_field_set(hcd->fields, HW_COMN_IRQ); + } + + /* + * PORT 1 Control register of the ISP1760 is the OTG control register + * on ISP1761. + * + * TODO: Really support OTG. For now we configure port 1 in device mode + */ + if (((isp->devflags & ISP1760_FLAG_ISP1761) || + (isp->devflags & ISP1760_FLAG_ISP1763)) && + (isp->devflags & ISP1760_FLAG_PERIPHERAL_EN)) { + isp1760_field_set(hcd->fields, HW_DM_PULLDOWN); + isp1760_field_set(hcd->fields, HW_DP_PULLDOWN); + isp1760_field_set(hcd->fields, HW_OTG_DISABLE); + } else { + isp1760_field_set(hcd->fields, HW_SW_SEL_HC_DC); + isp1760_field_set(hcd->fields, HW_VBUS_DRV); + isp1760_field_set(hcd->fields, HW_SEL_CP_EXT); + } + + printf("%s bus width: %u, oc: %s\n", + hcd->is_isp1763 ? "isp1763" : "isp1760", + isp->devflags & ISP1760_FLAG_BUS_WIDTH_8 ? 8 : + isp->devflags & ISP1760_FLAG_BUS_WIDTH_16 ? 16 : 32, + hcd->is_isp1763 ? "not available" : + isp->devflags & ISP1760_FLAG_ANALOG_OC ? "analog" : "digital"); + + return 0; +} + +void isp1760_set_pullup(struct isp1760_device *isp, bool enable) +{ + struct isp1760_hcd *hcd = &isp->hcd; + + if (enable) + isp1760_field_set(hcd->fields, HW_DP_PULLUP); + else + isp1760_field_set(hcd->fields, HW_DP_PULLUP_CLEAR); +} + +/* + * ISP1760/61: + * + * 60kb divided in: + * - 32 blocks @ 256 bytes + * - 20 blocks @ 1024 bytes + * - 4 blocks @ 8192 bytes + */ +static const struct isp1760_memory_layout isp176x_memory_conf = { + .blocks[0] = 32, + .blocks_size[0] = 256, + .blocks[1] = 20, + .blocks_size[1] = 1024, + .blocks[2] = 4, + .blocks_size[2] = 8192, + + .slot_num = 32, + .payload_blocks = 32 + 20 + 4, + .payload_area_size = 0xf000, +}; + +/* + * ISP1763: + * + * 20kb divided in: + * - 8 blocks @ 256 bytes + * - 2 blocks @ 1024 bytes + * - 4 blocks @ 4096 bytes + */ +static const struct isp1760_memory_layout isp1763_memory_conf = { + .blocks[0] = 8, + .blocks_size[0] = 256, + .blocks[1] = 2, + .blocks_size[1] = 1024, + .blocks[2] = 4, + .blocks_size[2] = 4096, + + .slot_num = 16, + .payload_blocks = 8 + 2 + 4, + .payload_area_size = 0x5000, +}; + +static const struct regmap_config isp1760_hc_regmap_conf = { + .width = REGMAP_SIZE_16, +}; + +static const struct reg_field isp1760_hc_reg_fields[] = { + [HCS_PPC] = REG_FIELD(ISP176x_HC_HCSPARAMS, 4, 4), + [HCS_N_PORTS] = REG_FIELD(ISP176x_HC_HCSPARAMS, 0, 3), + [HCC_ISOC_CACHE] = REG_FIELD(ISP176x_HC_HCCPARAMS, 7, 7), + [HCC_ISOC_THRES] = REG_FIELD(ISP176x_HC_HCCPARAMS, 4, 6), + [CMD_LRESET] = REG_FIELD(ISP176x_HC_USBCMD, 7, 7), + [CMD_RESET] = REG_FIELD(ISP176x_HC_USBCMD, 1, 1), + [CMD_RUN] = REG_FIELD(ISP176x_HC_USBCMD, 0, 0), + [STS_PCD] = REG_FIELD(ISP176x_HC_USBSTS, 2, 2), + [HC_FRINDEX] = REG_FIELD(ISP176x_HC_FRINDEX, 0, 13), + [FLAG_CF] = REG_FIELD(ISP176x_HC_CONFIGFLAG, 0, 0), + [HC_ISO_PTD_DONEMAP] = REG_FIELD(ISP176x_HC_ISO_PTD_DONEMAP, 0, 31), + [HC_ISO_PTD_SKIPMAP] = REG_FIELD(ISP176x_HC_ISO_PTD_SKIPMAP, 0, 31), + [HC_ISO_PTD_LASTPTD] = REG_FIELD(ISP176x_HC_ISO_PTD_LASTPTD, 0, 31), + [HC_INT_PTD_DONEMAP] = REG_FIELD(ISP176x_HC_INT_PTD_DONEMAP, 0, 31), + [HC_INT_PTD_SKIPMAP] = REG_FIELD(ISP176x_HC_INT_PTD_SKIPMAP, 0, 31), + [HC_INT_PTD_LASTPTD] = REG_FIELD(ISP176x_HC_INT_PTD_LASTPTD, 0, 31), + [HC_ATL_PTD_DONEMAP] = REG_FIELD(ISP176x_HC_ATL_PTD_DONEMAP, 0, 31), + [HC_ATL_PTD_SKIPMAP] = REG_FIELD(ISP176x_HC_ATL_PTD_SKIPMAP, 0, 31), + [HC_ATL_PTD_LASTPTD] = REG_FIELD(ISP176x_HC_ATL_PTD_LASTPTD, 0, 31), + [PORT_OWNER] = REG_FIELD(ISP176x_HC_PORTSC1, 13, 13), + [PORT_POWER] = REG_FIELD(ISP176x_HC_PORTSC1, 12, 12), + [PORT_LSTATUS] = REG_FIELD(ISP176x_HC_PORTSC1, 10, 11), + [PORT_RESET] = REG_FIELD(ISP176x_HC_PORTSC1, 8, 8), + [PORT_SUSPEND] = REG_FIELD(ISP176x_HC_PORTSC1, 7, 7), + [PORT_RESUME] = REG_FIELD(ISP176x_HC_PORTSC1, 6, 6), + [PORT_PE] = REG_FIELD(ISP176x_HC_PORTSC1, 2, 2), + [PORT_CSC] = REG_FIELD(ISP176x_HC_PORTSC1, 1, 1), + [PORT_CONNECT] = REG_FIELD(ISP176x_HC_PORTSC1, 0, 0), + [ALL_ATX_RESET] = REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 31, 31), + [HW_ANA_DIGI_OC] = REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 15, 15), + [HW_COMN_IRQ] = REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 10, 10), + [HW_DATA_BUS_WIDTH] = REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 8, 8), + [HW_DACK_POL_HIGH] = REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 6, 6), + [HW_DREQ_POL_HIGH] = REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 5, 5), + [HW_INTR_HIGH_ACT] = REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 2, 2), + [HW_INTR_EDGE_TRIG] = REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 1, 1), + [HW_GLOBAL_INTR_EN] = REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 0, 0), + [HC_CHIP_REV] = REG_FIELD(ISP176x_HC_CHIP_ID, 16, 31), + [HC_CHIP_ID_HIGH] = REG_FIELD(ISP176x_HC_CHIP_ID, 8, 15), + [HC_CHIP_ID_LOW] = REG_FIELD(ISP176x_HC_CHIP_ID, 0, 7), + [HC_SCRATCH] = REG_FIELD(ISP176x_HC_SCRATCH, 0, 31), + [SW_RESET_RESET_ALL] = REG_FIELD(ISP176x_HC_RESET, 0, 0), + [ISO_BUF_FILL] = REG_FIELD(ISP176x_HC_BUFFER_STATUS, 2, 2), + [INT_BUF_FILL] = REG_FIELD(ISP176x_HC_BUFFER_STATUS, 1, 1), + [ATL_BUF_FILL] = REG_FIELD(ISP176x_HC_BUFFER_STATUS, 0, 0), + [MEM_BANK_SEL] = REG_FIELD(ISP176x_HC_MEMORY, 16, 17), + [MEM_START_ADDR] = REG_FIELD(ISP176x_HC_MEMORY, 0, 15), + [HC_INTERRUPT] = REG_FIELD(ISP176x_HC_INTERRUPT, 0, 9), + [HC_ATL_IRQ_ENABLE] = REG_FIELD(ISP176x_HC_INTERRUPT_ENABLE, 8, 8), + [HC_INT_IRQ_ENABLE] = REG_FIELD(ISP176x_HC_INTERRUPT_ENABLE, 7, 7), + [HC_ISO_IRQ_MASK_OR] = REG_FIELD(ISP176x_HC_ISO_IRQ_MASK_OR, 0, 31), + [HC_INT_IRQ_MASK_OR] = REG_FIELD(ISP176x_HC_INT_IRQ_MASK_OR, 0, 31), + [HC_ATL_IRQ_MASK_OR] = REG_FIELD(ISP176x_HC_ATL_IRQ_MASK_OR, 0, 31), + [HC_ISO_IRQ_MASK_AND] = REG_FIELD(ISP176x_HC_ISO_IRQ_MASK_AND, 0, 31), + [HC_INT_IRQ_MASK_AND] = REG_FIELD(ISP176x_HC_INT_IRQ_MASK_AND, 0, 31), + [HC_ATL_IRQ_MASK_AND] = REG_FIELD(ISP176x_HC_ATL_IRQ_MASK_AND, 0, 31), + [HW_OTG_DISABLE] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 10, 10), + [HW_SW_SEL_HC_DC] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 7, 7), + [HW_VBUS_DRV] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 4, 4), + [HW_SEL_CP_EXT] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 3, 3), + [HW_DM_PULLDOWN] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 2, 2), + [HW_DP_PULLDOWN] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 1, 1), + [HW_DP_PULLUP] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 0, 0), + [HW_OTG_DISABLE_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 10, 10), + [HW_SW_SEL_HC_DC_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 7, 7), + [HW_VBUS_DRV_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 4, 4), + [HW_SEL_CP_EXT_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 3, 3), + [HW_DM_PULLDOWN_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 2, 2), + [HW_DP_PULLDOWN_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 1, 1), + [HW_DP_PULLUP_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 0, 0), + /* Make sure the array is sized properly during compilation */ + [HC_FIELD_MAX] = {}, +}; + +static const struct regmap_config isp1763_hc_regmap_conf = { + .width = REGMAP_SIZE_16, +}; + +static const struct reg_field isp1763_hc_reg_fields[] = { + [CMD_LRESET] = REG_FIELD(ISP1763_HC_USBCMD, 7, 7), + [CMD_RESET] = REG_FIELD(ISP1763_HC_USBCMD, 1, 1), + [CMD_RUN] = REG_FIELD(ISP1763_HC_USBCMD, 0, 0), + [STS_PCD] = REG_FIELD(ISP1763_HC_USBSTS, 2, 2), + [HC_FRINDEX] = REG_FIELD(ISP1763_HC_FRINDEX, 0, 13), + [FLAG_CF] = REG_FIELD(ISP1763_HC_CONFIGFLAG, 0, 0), + [HC_ISO_PTD_DONEMAP] = REG_FIELD(ISP1763_HC_ISO_PTD_DONEMAP, 0, 15), + [HC_ISO_PTD_SKIPMAP] = REG_FIELD(ISP1763_HC_ISO_PTD_SKIPMAP, 0, 15), + [HC_ISO_PTD_LASTPTD] = REG_FIELD(ISP1763_HC_ISO_PTD_LASTPTD, 0, 15), + [HC_INT_PTD_DONEMAP] = REG_FIELD(ISP1763_HC_INT_PTD_DONEMAP, 0, 15), + [HC_INT_PTD_SKIPMAP] = REG_FIELD(ISP1763_HC_INT_PTD_SKIPMAP, 0, 15), + [HC_INT_PTD_LASTPTD] = REG_FIELD(ISP1763_HC_INT_PTD_LASTPTD, 0, 15), + [HC_ATL_PTD_DONEMAP] = REG_FIELD(ISP1763_HC_ATL_PTD_DONEMAP, 0, 15), + [HC_ATL_PTD_SKIPMAP] = REG_FIELD(ISP1763_HC_ATL_PTD_SKIPMAP, 0, 15), + [HC_ATL_PTD_LASTPTD] = REG_FIELD(ISP1763_HC_ATL_PTD_LASTPTD, 0, 15), + [PORT_OWNER] = REG_FIELD(ISP1763_HC_PORTSC1, 13, 13), + [PORT_POWER] = REG_FIELD(ISP1763_HC_PORTSC1, 12, 12), + [PORT_LSTATUS] = REG_FIELD(ISP1763_HC_PORTSC1, 10, 11), + [PORT_RESET] = REG_FIELD(ISP1763_HC_PORTSC1, 8, 8), + [PORT_SUSPEND] = REG_FIELD(ISP1763_HC_PORTSC1, 7, 7), + [PORT_RESUME] = REG_FIELD(ISP1763_HC_PORTSC1, 6, 6), + [PORT_PE] = REG_FIELD(ISP1763_HC_PORTSC1, 2, 2), + [PORT_CSC] = REG_FIELD(ISP1763_HC_PORTSC1, 1, 1), + [PORT_CONNECT] = REG_FIELD(ISP1763_HC_PORTSC1, 0, 0), + [HW_DATA_BUS_WIDTH] = REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 4, 4), + [HW_DACK_POL_HIGH] = REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 6, 6), + [HW_DREQ_POL_HIGH] = REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 5, 5), + [HW_INTF_LOCK] = REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 3, 3), + [HW_INTR_HIGH_ACT] = REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 2, 2), + [HW_INTR_EDGE_TRIG] = REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 1, 1), + [HW_GLOBAL_INTR_EN] = REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 0, 0), + [SW_RESET_RESET_ATX] = REG_FIELD(ISP1763_HC_RESET, 3, 3), + [SW_RESET_RESET_ALL] = REG_FIELD(ISP1763_HC_RESET, 0, 0), + [HC_CHIP_ID_HIGH] = REG_FIELD(ISP1763_HC_CHIP_ID, 0, 15), + [HC_CHIP_ID_LOW] = REG_FIELD(ISP1763_HC_CHIP_REV, 8, 15), + [HC_CHIP_REV] = REG_FIELD(ISP1763_HC_CHIP_REV, 0, 7), + [HC_SCRATCH] = REG_FIELD(ISP1763_HC_SCRATCH, 0, 15), + [ISO_BUF_FILL] = REG_FIELD(ISP1763_HC_BUFFER_STATUS, 2, 2), + [INT_BUF_FILL] = REG_FIELD(ISP1763_HC_BUFFER_STATUS, 1, 1), + [ATL_BUF_FILL] = REG_FIELD(ISP1763_HC_BUFFER_STATUS, 0, 0), + [MEM_START_ADDR] = REG_FIELD(ISP1763_HC_MEMORY, 0, 15), + [HC_DATA] = REG_FIELD(ISP1763_HC_DATA, 0, 15), + [HC_INTERRUPT] = REG_FIELD(ISP1763_HC_INTERRUPT, 0, 10), + [HC_ATL_IRQ_ENABLE] = REG_FIELD(ISP1763_HC_INTERRUPT_ENABLE, 8, 8), + [HC_INT_IRQ_ENABLE] = REG_FIELD(ISP1763_HC_INTERRUPT_ENABLE, 7, 7), + [HC_ISO_IRQ_MASK_OR] = REG_FIELD(ISP1763_HC_ISO_IRQ_MASK_OR, 0, 15), + [HC_INT_IRQ_MASK_OR] = REG_FIELD(ISP1763_HC_INT_IRQ_MASK_OR, 0, 15), + [HC_ATL_IRQ_MASK_OR] = REG_FIELD(ISP1763_HC_ATL_IRQ_MASK_OR, 0, 15), + [HC_ISO_IRQ_MASK_AND] = REG_FIELD(ISP1763_HC_ISO_IRQ_MASK_AND, 0, 15), + [HC_INT_IRQ_MASK_AND] = REG_FIELD(ISP1763_HC_INT_IRQ_MASK_AND, 0, 15), + [HC_ATL_IRQ_MASK_AND] = REG_FIELD(ISP1763_HC_ATL_IRQ_MASK_AND, 0, 15), + [HW_HC_2_DIS] = REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 15, 15), + [HW_OTG_DISABLE] = REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 10, 10), + [HW_SW_SEL_HC_DC] = REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 7, 7), + [HW_VBUS_DRV] = REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 4, 4), + [HW_SEL_CP_EXT] = REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 3, 3), + [HW_DM_PULLDOWN] = REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 2, 2), + [HW_DP_PULLDOWN] = REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 1, 1), + [HW_DP_PULLUP] = REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 0, 0), + [HW_HC_2_DIS_CLEAR] = REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 15, 15), + [HW_OTG_DISABLE_CLEAR] = REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 10, 10), + [HW_SW_SEL_HC_DC_CLEAR] = REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 7, 7), + [HW_VBUS_DRV_CLEAR] = REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 4, 4), + [HW_SEL_CP_EXT_CLEAR] = REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 3, 3), + [HW_DM_PULLDOWN_CLEAR] = REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 2, 2), + [HW_DP_PULLDOWN_CLEAR] = REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 1, 1), + [HW_DP_PULLUP_CLEAR] = REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 0, 0), + /* Make sure the array is sized properly during compilation */ + [HC_FIELD_MAX] = {}, +}; + +int isp1760_register(struct isp1760_device *isp, struct resource *mem, int irq, + unsigned long irqflags) +{ + const struct regmap_config *hc_regmap; + const struct reg_field *hc_reg_fields; + struct isp1760_hcd *hcd; + struct regmap_field *f; + unsigned int devflags; + struct udevice *dev; + int ret; + int i; + + hcd = &isp->hcd; + devflags = isp->devflags; + dev = isp->dev; + + hcd->is_isp1763 = !!(devflags & ISP1760_FLAG_ISP1763); + + if (!hcd->is_isp1763 && (devflags & ISP1760_FLAG_BUS_WIDTH_8)) { + dev_err(dev, "isp1760/61 do not support data width 8\n"); + return -EINVAL; + } + + if (hcd->is_isp1763) { + hc_regmap = &isp1763_hc_regmap_conf; + hc_reg_fields = &isp1763_hc_reg_fields[0]; + } else { + hc_regmap = &isp1760_hc_regmap_conf; + hc_reg_fields = &isp1760_hc_reg_fields[0]; + } + + hcd->base = devm_ioremap(dev, mem->start, resource_size(mem)); + if (IS_ERR(hcd->base)) + return PTR_ERR(hcd->base); + + hcd->regs = devm_regmap_init(dev, NULL, NULL, hc_regmap); + if (IS_ERR(hcd->regs)) + return PTR_ERR(hcd->regs); + + for (i = 0; i < HC_FIELD_MAX; i++) { + f = devm_regmap_field_alloc(dev, hcd->regs, hc_reg_fields[i]); + if (IS_ERR(f)) + return PTR_ERR(f); + + hcd->fields[i] = f; + } + + if (hcd->is_isp1763) + hcd->memory_layout = &isp1763_memory_conf; + else + hcd->memory_layout = &isp176x_memory_conf; + + ret = isp1760_init_core(isp); + if (ret < 0) + return ret; + + hcd->dev = dev; + + ret = isp1760_hcd_register(hcd, mem, irq, irqflags, dev); + if (ret < 0) + return ret; + + ret = isp1760_hcd_lowlevel_init(hcd); + if (ret < 0) + return ret; + + dev_set_drvdata(dev, isp); + + return 0; +} + +void isp1760_unregister(struct isp1760_device *isp) +{ + isp1760_hcd_unregister(&isp->hcd); +} diff --git a/drivers/usb/isp1760/isp1760-core.h b/drivers/usb/isp1760/isp1760-core.h new file mode 100644 index 00000000000..0a60e30b5fe --- /dev/null +++ b/drivers/usb/isp1760/isp1760-core.h @@ -0,0 +1,96 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Driver for the NXP ISP1760 chip + * + * Copyright 2021 Linaro, Rui Miguel Silva + * Copyright 2014 Laurent Pinchart + * Copyright 2007 Sebastian Siewior + * + * Contacts: + * Sebastian Siewior <bigeasy@linutronix.de> + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Rui Miguel Silva <rui.silva@linaro.org> + */ + +#ifndef _ISP1760_CORE_H_ +#define _ISP1760_CORE_H_ + +#include <linux/compat.h> +#include <linux/ioport.h> +#include <regmap.h> + +#include "isp1760-hcd.h" + +struct device; +struct gpio_desc; + +/* + * Device flags that can vary from board to board. All of these + * indicate the most "atypical" case, so that a devflags of 0 is + * a sane default configuration. + */ +#define ISP1760_FLAG_BUS_WIDTH_16 0x00000002 /* 16-bit data bus width */ +#define ISP1760_FLAG_PERIPHERAL_EN 0x00000004 /* Port 1 supports Peripheral mode*/ +#define ISP1760_FLAG_ANALOG_OC 0x00000008 /* Analog overcurrent */ +#define ISP1760_FLAG_DACK_POL_HIGH 0x00000010 /* DACK active high */ +#define ISP1760_FLAG_DREQ_POL_HIGH 0x00000020 /* DREQ active high */ +#define ISP1760_FLAG_ISP1761 0x00000040 /* Chip is ISP1761 */ +#define ISP1760_FLAG_INTR_POL_HIGH 0x00000080 /* Interrupt polarity active high */ +#define ISP1760_FLAG_INTR_EDGE_TRIG 0x00000100 /* Interrupt edge triggered */ +#define ISP1760_FLAG_ISP1763 0x00000200 /* Chip is ISP1763 */ +#define ISP1760_FLAG_BUS_WIDTH_8 0x00000400 /* 8-bit data bus width */ + +struct isp1760_device { + struct udevice *dev; + + unsigned int devflags; + struct gpio_desc *rst_gpio; + + struct isp1760_hcd hcd; +}; + +int isp1760_register(struct isp1760_device *isp, struct resource *mem, int irq, + unsigned long irqflags); +void isp1760_unregister(struct isp1760_device *isp); + +void isp1760_set_pullup(struct isp1760_device *isp, bool enable); + +static inline u32 isp1760_field_read(struct regmap_field **fields, u32 field) +{ + unsigned int val; + + regmap_field_read(fields[field], &val); + + return val; +} + +static inline void isp1760_field_write(struct regmap_field **fields, u32 field, + u32 val) +{ + regmap_field_write(fields[field], val); +} + +static inline void isp1760_field_set(struct regmap_field **fields, u32 field) +{ + isp1760_field_write(fields, field, 0xFFFFFFFF); +} + +static inline void isp1760_field_clear(struct regmap_field **fields, u32 field) +{ + isp1760_field_write(fields, field, 0); +} + +static inline u32 isp1760_reg_read(struct regmap *regs, u32 reg) +{ + unsigned int val; + + regmap_read(regs, reg, &val); + + return val; +} + +static inline void isp1760_reg_write(struct regmap *regs, u32 reg, u32 val) +{ + regmap_write(regs, reg, val); +} +#endif diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c new file mode 100644 index 00000000000..a6c4d97aee3 --- /dev/null +++ b/drivers/usb/isp1760/isp1760-hcd.c @@ -0,0 +1,2477 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the NXP ISP1760 chip + * + * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org> + * + */ + +#include <hexdump.h> +#include <common.h> +#include <asm/cache.h> +#include <cpu_func.h> +#include <dm.h> +#include <dm/device-internal.h> +#include <dm/device_compat.h> +#include <linux/bug.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/usb/usb_urb_compat.h> +#include <usb.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <asm/unaligned.h> + +#include "isp1760-core.h" +#include "isp1760-hcd.h" +#include "isp1760-regs.h" +#include "isp1760-uboot.h" + +#define ISP1760_LANGUAGE_DESC "\4\3\19\4" +#define ISP1760_VENDOR_DESC "\16\3U\0-\0B\0o\0o\0t\0" +#define ISP1760_PRODUCT_NAME_DESC "\52\3I\0S\0P\0-\0 \0H\0o\0s\0t\0 \0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0" + +static struct kmem_cache *qtd_cachep; +static struct kmem_cache *qh_cachep; +static struct kmem_cache *urb_listitem_cachep; + +typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh, + struct isp1760_qtd *qtd); + +static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd) +{ + return hcd->hcd_priv; +} + +#define dw_to_le32(x) (cpu_to_le32((__force u32)x)) +#define le32_to_dw(x) ((__force __dw)(le32_to_cpu(x))) + +/* urb state*/ +#define DELETE_URB (0x0008) +#define NO_TRANSFER_ACTIVE (0xffffffff) + +/* Philips Proprietary Transfer Descriptor (PTD) */ +typedef __u32 __bitwise __dw; +struct ptd { + __dw dw0; + __dw dw1; + __dw dw2; + __dw dw3; + __dw dw4; + __dw dw5; + __dw dw6; + __dw dw7; +}; + +struct ptd_le32 { + __le32 dw0; + __le32 dw1; + __le32 dw2; + __le32 dw3; + __le32 dw4; + __le32 dw5; + __le32 dw6; + __le32 dw7; +}; + +#define PTD_OFFSET 0x0400 +#define ISO_PTD_OFFSET 0x0400 +#define INT_PTD_OFFSET 0x0800 +#define ATL_PTD_OFFSET 0x0c00 +#define PAYLOAD_OFFSET 0x1000 + +#define ISP_BANK_0 0x00 +#define ISP_BANK_1 0x01 +#define ISP_BANK_2 0x02 +#define ISP_BANK_3 0x03 + +#define TO_DW(x) ((__force __dw)x) +#define TO_U32(x) ((__force u32)x) + + /* ATL */ + /* DW0 */ +#define DW0_VALID_BIT TO_DW(1) +#define FROM_DW0_VALID(x) (TO_U32(x) & 0x01) +#define TO_DW0_LENGTH(x) TO_DW((((u32)x) << 3)) +#define TO_DW0_MAXPACKET(x) TO_DW((((u32)x) << 18)) +#define TO_DW0_MULTI(x) TO_DW((((u32)x) << 29)) +#define TO_DW0_ENDPOINT(x) TO_DW((((u32)x) << 31)) +/* DW1 */ +#define TO_DW1_DEVICE_ADDR(x) TO_DW((((u32)x) << 3)) +#define TO_DW1_PID_TOKEN(x) TO_DW((((u32)x) << 10)) +#define DW1_TRANS_BULK TO_DW(((u32)2 << 12)) +#define DW1_TRANS_INT TO_DW(((u32)3 << 12)) +#define DW1_TRANS_SPLIT TO_DW(((u32)1 << 14)) +#define DW1_SE_USB_LOSPEED TO_DW(((u32)2 << 16)) +#define TO_DW1_PORT_NUM(x) TO_DW((((u32)x) << 18)) +#define TO_DW1_HUB_NUM(x) TO_DW((((u32)x) << 25)) +/* DW2 */ +#define TO_DW2_DATA_START_ADDR(x) TO_DW((((u32)x) << 8)) +#define TO_DW2_RL(x) TO_DW(((x) << 25)) +#define FROM_DW2_RL(x) ((TO_U32(x) >> 25) & 0xf) +/* DW3 */ +#define FROM_DW3_NRBYTESTRANSFERRED(x) TO_U32((x) & 0x3fff) +#define FROM_DW3_SCS_NRBYTESTRANSFERRED(x) TO_U32((x) & 0x07ff) +#define TO_DW3_NAKCOUNT(x) TO_DW(((x) << 19)) +#define FROM_DW3_NAKCOUNT(x) ((TO_U32(x) >> 19) & 0xf) +#define TO_DW3_CERR(x) TO_DW(((x) << 23)) +#define FROM_DW3_CERR(x) ((TO_U32(x) >> 23) & 0x3) +#define TO_DW3_DATA_TOGGLE(x) TO_DW(((x) << 25)) +#define FROM_DW3_DATA_TOGGLE(x) ((TO_U32(x) >> 25) & 0x1) +#define TO_DW3_PING(x) TO_DW(((x) << 26)) +#define FROM_DW3_PING(x) ((TO_U32(x) >> 26) & 0x1) +#define DW3_ERROR_BIT TO_DW((1 << 28)) +#define DW3_BABBLE_BIT TO_DW((1 << 29)) +#define DW3_HALT_BIT TO_DW((1 << 30)) +#define DW3_ACTIVE_BIT TO_DW((1 << 31)) +#define FROM_DW3_ACTIVE(x) ((TO_U32(x) >> 31) & 0x01) + +#define INT_UNDERRUN BIT(2) +#define INT_BABBLE BIT(1) +#define INT_EXACT BIT(0) + +#define SETUP_PID (2) +#define IN_PID (1) +#define OUT_PID (0) + +/* Errata 1 */ +#define RL_COUNTER (0) +#define NAK_COUNTER (0) +#define ERR_COUNTER (3) + +struct isp1760_qtd { + u8 packet_type; + void *data_buffer; + u32 payload_addr; + + /* the rest is HCD-private */ + struct list_head qtd_list; + struct urb *urb; + size_t length; + size_t actual_length; + + /* + * QTD_ENQUEUED: waiting for transfer (inactive) + * QTD_PAYLOAD_ALLOC: chip mem has been allocated for payload + * QTD_XFER_STARTED: valid ptd has been written to isp176x - only + * interrupt handler may touch this qtd! + * QTD_XFER_COMPLETE: payload has been transferred successfully + * QTD_RETIRE: transfer error/abort qtd + */ +#define QTD_ENQUEUED 0 +#define QTD_PAYLOAD_ALLOC 1 +#define QTD_XFER_STARTED 2 +#define QTD_XFER_COMPLETE 3 +#define QTD_RETIRE 4 + u32 status; +}; + +/* Queue head, one for each active endpoint */ +struct isp1760_qh { + struct list_head qh_list; + struct list_head qtd_list; + int epnum; + u32 toggle; + u32 ping; + int slot; + int tt_buffer_dirty; /* See USB2.0 spec section 11.17.5 */ +}; + +struct urb_listitem { + struct list_head urb_list; + struct urb *urb; +}; + +static const u32 isp1763_hc_portsc1_fields[] = { + [PORT_OWNER] = BIT(13), + [PORT_POWER] = BIT(12), + [PORT_LSTATUS] = BIT(10), + [PORT_RESET] = BIT(8), + [PORT_SUSPEND] = BIT(7), + [PORT_RESUME] = BIT(6), + [PORT_PE] = BIT(2), + [PORT_CSC] = BIT(1), + [PORT_CONNECT] = BIT(0), +}; + +static struct descriptor { + struct usb_device_descriptor device; + struct usb_config_descriptor config; + struct usb_interface_descriptor interface; + struct usb_endpoint_descriptor endpoint; +} __packed rh_descriptor = { + { + /* usb 2.0 root hub device descriptor */ + 0x12, /* __u8 bLength; */ + USB_DT_DEVICE, /* __u8 bDescriptorType; Device */ + 0x0002, /* __le16 bcdUSB; v2.0 */ + + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */ + 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ + + 0x6b1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x0200, /* __le16 idProduct; device 0x0002 */ + 0x0001, /* __le16 bcdDevice */ + + 0x03, /* __u8 iManufacturer; */ + 0x02, /* __u8 iProduct; */ + 0x01, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ + }, { + /* one configuration */ + 0x09, /* __u8 bLength; */ + USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */ + 0x1900, /* __le16 wTotalLength; */ + 0x01, /* __u8 bNumInterfaces; (1) */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0xc0, /* __u8 bmAttributes; + * Bit 7: must be set, + * 6: Self-powered, + * 5: Remote wakeup, + * 4..0: resvd + */ + 0x00, /* __u8 MaxPower; */ + }, { + /* one interface */ + 0x09, /* __u8 if_bLength; */ + USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ + 0x00, /* __u8 if_iInterface; */ + }, { + /* one endpoint (status change endpoint) */ + 0x07, /* __u8 ep_bLength; */ + USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ + /* see hub.c:hub_configure() for details. */ + (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, + 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ + }, +}; + +/* + * Access functions for isp176x registers regmap fields + */ +static u32 isp1760_hcd_read(struct usb_hcd *hcd, u32 field) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + return isp1760_field_read(priv->fields, field); +} + +/* + * We need, in isp1763, to write directly the values to the portsc1 + * register so it will make the other values to trigger. + */ +static void isp1760_hcd_portsc1_set_clear(struct isp1760_hcd *priv, u32 field, + u32 val) +{ + u32 bit = isp1763_hc_portsc1_fields[field]; + u32 port_status = readl(priv->base + ISP1763_HC_PORTSC1); + + if (val) + writel(port_status | bit, priv->base + ISP1763_HC_PORTSC1); + else + writel(port_status & ~bit, priv->base + ISP1763_HC_PORTSC1); +} + +static void isp1760_hcd_write(struct usb_hcd *hcd, u32 field, u32 val) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + if (unlikely(priv->is_isp1763 && + (field >= PORT_OWNER && field <= PORT_CONNECT))) + return isp1760_hcd_portsc1_set_clear(priv, field, val); + + isp1760_field_write(priv->fields, field, val); +} + +static void isp1760_hcd_set(struct usb_hcd *hcd, u32 field) +{ + isp1760_hcd_write(hcd, field, 0xFFFFFFFF); +} + +static void isp1760_hcd_clear(struct usb_hcd *hcd, u32 field) +{ + isp1760_hcd_write(hcd, field, 0); +} + +static int isp1760_hcd_set_and_wait(struct usb_hcd *hcd, u32 field, + u32 timeout_us) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + u32 val; + + isp1760_hcd_set(hcd, field); + + return regmap_field_read_poll_timeout(priv->fields[field], val, + val, 0, timeout_us); +} + +static int isp1760_hcd_set_and_wait_swap(struct usb_hcd *hcd, u32 field, + u32 timeout_us) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + u32 val; + + isp1760_hcd_set(hcd, field); + + return regmap_field_read_poll_timeout(priv->fields[field], val, + !val, 0, timeout_us); +} + +static int isp1760_hcd_clear_and_wait(struct usb_hcd *hcd, u32 field, + u32 timeout_us) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + u32 val; + + isp1760_hcd_clear(hcd, field); + + return regmap_field_read_poll_timeout(priv->fields[field], val, + !val, 0, timeout_us); +} + +static bool isp1760_hcd_is_set(struct usb_hcd *hcd, u32 field) +{ + return !!isp1760_hcd_read(hcd, field); +} + +static bool isp1760_hcd_ppc_is_set(struct usb_hcd *hcd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + if (priv->is_isp1763) + return true; + + return isp1760_hcd_is_set(hcd, HCS_PPC); +} + +static u32 isp1760_hcd_n_ports(struct usb_hcd *hcd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + if (priv->is_isp1763) + return 1; + + return isp1760_hcd_read(hcd, HCS_N_PORTS); +} + +/* + * Access functions for isp176x memory (offset >= 0x0400). + * + * bank_reads8() reads memory locations prefetched by an earlier write to + * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi- + * bank optimizations, you should use the more generic mem_read() below. + * + * For access to ptd memory, use the specialized ptd_read() and ptd_write() + * below. + * + * These functions copy via MMIO data to/from the device. memcpy_{to|from}io() + * doesn't quite work because some people have to enforce 32-bit access + */ +static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr, + __u32 *dst, u32 bytes) +{ + __u32 __iomem *src; + u32 val; + __u8 *src_byteptr; + __u8 *dst_byteptr; + + src = src_base + (bank_addr | src_offset); + + if (src_offset < PAYLOAD_OFFSET) { + while (bytes >= 4) { + *dst = readl_relaxed(src); + bytes -= 4; + src++; + dst++; + } + } else { + while (bytes >= 4) { + *dst = __raw_readl(src); + bytes -= 4; + src++; + dst++; + } + } + + if (!bytes) + return; + + /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully + * allocated. + */ + if (src_offset < PAYLOAD_OFFSET) + val = readl_relaxed(src); + else + val = __raw_readl(src); + + dst_byteptr = (void *)dst; + src_byteptr = (void *)&val; + while (bytes > 0) { + *dst_byteptr = *src_byteptr; + dst_byteptr++; + src_byteptr++; + bytes--; + } +} + +static void isp1760_mem_read(struct usb_hcd *hcd, u32 src_offset, void *dst, + u32 bytes) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + isp1760_hcd_write(hcd, MEM_BANK_SEL, ISP_BANK_0); + isp1760_hcd_write(hcd, MEM_START_ADDR, src_offset); + ndelay(100); + + bank_reads8(priv->base, src_offset, ISP_BANK_0, dst, bytes); +} + +/* + * ISP1763 does not have the banks direct host controller memory access, + * needs to use the HC_DATA register. Add data read/write according to this, + * and also adjust 16bit access. + */ +static void isp1763_mem_read(struct usb_hcd *hcd, u16 srcaddr, + u16 *dstptr, u32 bytes) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + /* Write the starting device address to the hcd memory register */ + isp1760_reg_write(priv->regs, ISP1763_HC_MEMORY, srcaddr); + ndelay(100); /* Delay between consecutive access */ + + /* As long there are at least 16-bit to read ... */ + while (bytes >= 2) { + *dstptr = __raw_readw(priv->base + ISP1763_HC_DATA); + bytes -= 2; + dstptr++; + } + + /* If there are no more bytes to read, return */ + if (bytes <= 0) + return; + + *((u8 *)dstptr) = (u8)(readw(priv->base + ISP1763_HC_DATA) & 0xFF); +} + +static void mem_read(struct usb_hcd *hcd, u32 src_offset, __u32 *dst, + u32 bytes) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + if (!priv->is_isp1763) + return isp1760_mem_read(hcd, src_offset, (u16 *)dst, bytes); + + isp1763_mem_read(hcd, (u16)src_offset, (u16 *)dst, bytes); +} + +static void isp1760_mem_write(void __iomem *dst_base, u32 dst_offset, + __u32 const *src, u32 bytes) +{ + __u32 __iomem *dst; + + dst = dst_base + dst_offset; + + if (dst_offset < PAYLOAD_OFFSET) { + while (bytes >= 4) { + writel_relaxed(*src, dst); + bytes -= 4; + src++; + dst++; + } + } else { + while (bytes >= 4) { + __raw_writel(*src, dst); + bytes -= 4; + src++; + dst++; + } + } + + if (!bytes) + return; + /* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the + * extra bytes should not be read by the HW. + */ + + if (dst_offset < PAYLOAD_OFFSET) + writel_relaxed(*src, dst); + else + __raw_writel(*src, dst); +} + +static void isp1763_mem_write(struct usb_hcd *hcd, u16 dstaddr, u16 *src, + u32 bytes) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + /* Write the starting device address to the hcd memory register */ + isp1760_reg_write(priv->regs, ISP1763_HC_MEMORY, dstaddr); + ndelay(100); /* Delay between consecutive access */ + + while (bytes >= 2) { + /* Get and write the data; then adjust the data ptr and len */ + __raw_writew(*src, priv->base + ISP1763_HC_DATA); + bytes -= 2; + src++; + } + + /* If there are no more bytes to process, return */ + if (bytes <= 0) + return; + + /* + * The only way to get here is if there is a single byte left, + * get it and write it to the data reg; + */ + writew(*((u8 *)src), priv->base + ISP1763_HC_DATA); +} + +static void mem_write(struct usb_hcd *hcd, u32 dst_offset, __u32 *src, + u32 bytes) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + if (!priv->is_isp1763) + return isp1760_mem_write(priv->base, dst_offset, src, bytes); + + isp1763_mem_write(hcd, dst_offset, (u16 *)src, bytes); +} + +/* + * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET, + * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32. + */ +static void isp1760_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot, + struct ptd *ptd) +{ + u16 src_offset = ptd_offset + slot * sizeof(*ptd); + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + isp1760_hcd_write(hcd, MEM_BANK_SEL, ISP_BANK_0); + isp1760_hcd_write(hcd, MEM_START_ADDR, src_offset); + ndelay(90); + + bank_reads8(priv->base, src_offset, ISP_BANK_0, (void *)ptd, + sizeof(*ptd)); +} + +static void isp1763_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot, + struct ptd *ptd) +{ + u16 src_offset = ptd_offset + slot * sizeof(*ptd); + struct ptd_le32 le32_ptd; + + isp1763_mem_read(hcd, src_offset, (u16 *)&le32_ptd, sizeof(le32_ptd)); + /* Normalize the data obtained */ + ptd->dw0 = le32_to_dw(le32_ptd.dw0); + ptd->dw1 = le32_to_dw(le32_ptd.dw1); + ptd->dw2 = le32_to_dw(le32_ptd.dw2); + ptd->dw3 = le32_to_dw(le32_ptd.dw3); + ptd->dw4 = le32_to_dw(le32_ptd.dw4); + ptd->dw5 = le32_to_dw(le32_ptd.dw5); + ptd->dw6 = le32_to_dw(le32_ptd.dw6); + ptd->dw7 = le32_to_dw(le32_ptd.dw7); +} + +static void ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot, + struct ptd *ptd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + if (!priv->is_isp1763) + return isp1760_ptd_read(hcd, ptd_offset, slot, ptd); + + isp1763_ptd_read(hcd, ptd_offset, slot, ptd); +} + +static void isp1763_ptd_write(struct usb_hcd *hcd, u32 ptd_offset, u32 slot, + struct ptd *cpu_ptd) +{ + u16 dst_offset = ptd_offset + slot * sizeof(*cpu_ptd); + struct ptd_le32 ptd; + + ptd.dw0 = dw_to_le32(cpu_ptd->dw0); + ptd.dw1 = dw_to_le32(cpu_ptd->dw1); + ptd.dw2 = dw_to_le32(cpu_ptd->dw2); + ptd.dw3 = dw_to_le32(cpu_ptd->dw3); + ptd.dw4 = dw_to_le32(cpu_ptd->dw4); + ptd.dw5 = dw_to_le32(cpu_ptd->dw5); + ptd.dw6 = dw_to_le32(cpu_ptd->dw6); + ptd.dw7 = dw_to_le32(cpu_ptd->dw7); + + isp1763_mem_write(hcd, dst_offset, (u16 *)&ptd.dw0, + 8 * sizeof(ptd.dw0)); +} + +static void isp1760_ptd_write(void __iomem *base, u32 ptd_offset, u32 slot, + struct ptd *ptd) +{ + u32 dst_offset = ptd_offset + slot * sizeof(*ptd); + + isp1760_mem_write(base, dst_offset + sizeof(ptd->dw0), + (__force u32 *)&ptd->dw1, 7 * sizeof(ptd->dw1)); + /* + * Make sure dw0 gets written last (after other dw's and after payload) + * since it contains the enable bit + */ + wmb(); + isp1760_mem_write(base, dst_offset, (__force u32 *)&ptd->dw0, + sizeof(ptd->dw0)); +} + +static void ptd_write(struct usb_hcd *hcd, u32 ptd_offset, u32 slot, + struct ptd *ptd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + if (!priv->is_isp1763) + return isp1760_ptd_write(priv->base, ptd_offset, slot, ptd); + + isp1763_ptd_write(hcd, ptd_offset, slot, ptd); +} + +/* memory management of the 60kb on the chip from 0x1000 to 0xffff */ +static void init_memory(struct isp1760_hcd *priv) +{ + const struct isp1760_memory_layout *mem = priv->memory_layout; + int i, j, curr; + u32 payload_addr; + + payload_addr = PAYLOAD_OFFSET; + + for (i = 0, curr = 0; i < ARRAY_SIZE(mem->blocks); i++, curr += j) { + for (j = 0; j < mem->blocks[i]; j++) { + priv->memory_pool[curr + j].start = payload_addr; + priv->memory_pool[curr + j].size = mem->blocks_size[i]; + priv->memory_pool[curr + j].free = 1; + payload_addr += priv->memory_pool[curr + j].size; + } + } + + WARN_ON(payload_addr - priv->memory_pool[0].start > + mem->payload_area_size); +} + +static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + const struct isp1760_memory_layout *mem = priv->memory_layout; + int i; + + WARN_ON(qtd->payload_addr); + + if (!qtd->length) + return; + + for (i = 0; i < mem->payload_blocks; i++) { + if (priv->memory_pool[i].size >= qtd->length && + priv->memory_pool[i].free) { + priv->memory_pool[i].free = 0; + qtd->payload_addr = priv->memory_pool[i].start; + return; + } + } +} + +static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + const struct isp1760_memory_layout *mem = priv->memory_layout; + int i; + + if (!qtd->payload_addr) + return; + + for (i = 0; i < mem->payload_blocks; i++) { + if (priv->memory_pool[i].start == qtd->payload_addr) { + WARN_ON(priv->memory_pool[i].free); + priv->memory_pool[i].free = 1; + qtd->payload_addr = 0; + return; + } + } + + WARN_ON(1); + qtd->payload_addr = 0; +} + +/* reset a non-running (STS_HALT == 1) controller */ +static int ehci_reset(struct usb_hcd *hcd) +{ + return isp1760_hcd_set_and_wait_swap(hcd, CMD_RESET, 250 * 1000); +} + +static struct isp1760_qh *qh_alloc(gfp_t flags) +{ + struct isp1760_qh *qh; + + qh = kmem_cache_alloc(qh_cachep, flags); + if (!qh) + return NULL; + + memset(qh, '\0', qh_cachep->sz); + INIT_LIST_HEAD(&qh->qh_list); + INIT_LIST_HEAD(&qh->qtd_list); + qh->slot = -1; + + return qh; +} + +static void qh_free(struct isp1760_qh *qh) +{ + WARN_ON(!list_empty(&qh->qtd_list)); + WARN_ON(qh->slot > -1); + kmem_cache_free(qh_cachep, qh); +} + +/* one-time init, only for memory state */ +static int priv_init(struct usb_hcd *hcd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + u32 isoc_cache; + u32 isoc_thres; + int i; + + for (i = 0; i < QH_END; i++) + INIT_LIST_HEAD(&priv->qh_list[i]); + + /* + * hw default: 1K periodic list heads, one per frame. + * periodic_size can shrink by USBCMD update if hcc_params allows. + */ + priv->periodic_size = DEFAULT_I_TDPS; + + if (priv->is_isp1763) { + priv->i_thresh = 2; + return 0; + } + + /* controllers may cache some of the periodic schedule ... */ + isoc_cache = isp1760_hcd_read(hcd, HCC_ISOC_CACHE); + isoc_thres = isp1760_hcd_read(hcd, HCC_ISOC_THRES); + + /* full frame cache */ + if (isoc_cache) + priv->i_thresh = 8; + else /* N microframes cached */ + priv->i_thresh = 2 + isoc_thres; + + return 0; +} + +static int isp1760_hc_setup(struct usb_hcd *hcd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + u32 atx_reset; + int result; + u32 scratch; + u32 pattern; + + if (priv->is_isp1763) + pattern = 0xcafe; + else + pattern = 0xdeadcafe; + + isp1760_hcd_write(hcd, HC_SCRATCH, pattern); + + /* Change bus pattern */ + isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH); + scratch = isp1760_hcd_read(hcd, HC_SCRATCH); + if (scratch != pattern) { + printf("Scratch test failed. 0x%08x\n", scratch); + return -ENODEV; + } + + /* + * The RESET_HC bit in the SW_RESET register is supposed to reset the + * host controller without touching the CPU interface registers, but at + * least on the ISP1761 it seems to behave as the RESET_ALL bit and + * reset the whole device. We thus can't use it here, so let's reset + * the host controller through the EHCI USB Command register. The device + * has been reset in core code anyway, so this shouldn't matter. + */ + isp1760_hcd_clear(hcd, ISO_BUF_FILL); + isp1760_hcd_clear(hcd, INT_BUF_FILL); + isp1760_hcd_clear(hcd, ATL_BUF_FILL); + + isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP); + isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP); + isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP); + + result = ehci_reset(hcd); + if (result) + return result; + + /* Step 11 passed */ + + /* ATL reset */ + if (priv->is_isp1763) + atx_reset = SW_RESET_RESET_ATX; + else + atx_reset = ALL_ATX_RESET; + + isp1760_hcd_set(hcd, atx_reset); + mdelay(10); + isp1760_hcd_clear(hcd, atx_reset); + + if (priv->is_isp1763) { + isp1760_hcd_set(hcd, HW_OTG_DISABLE); + isp1760_hcd_set(hcd, HW_SW_SEL_HC_DC_CLEAR); + isp1760_hcd_set(hcd, HW_HC_2_DIS_CLEAR); + isp1760_hcd_set(hcd, HW_DM_PULLDOWN); + isp1760_hcd_set(hcd, HW_DP_PULLDOWN); + mdelay(10); + + isp1760_hcd_set(hcd, HW_INTF_LOCK); + } + + isp1760_hcd_set(hcd, HC_INT_IRQ_ENABLE); + isp1760_hcd_set(hcd, HC_ATL_IRQ_ENABLE); + + return priv_init(hcd); +} + +static u32 base_to_chip(u32 base) +{ + return ((base - 0x400) >> 3); +} + +static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh) +{ + struct urb *urb; + + if (list_is_last(&qtd->qtd_list, &qh->qtd_list)) + return 1; + + urb = qtd->urb; + qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list); + + return (qtd->urb != urb); +} + +/* magic numbers that can affect system performance */ +#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ +#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ +#define EHCI_TUNE_RL_TT 0 +#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ +#define EHCI_TUNE_MULT_TT 1 +#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ + +static void create_ptd_atl(struct isp1760_qh *qh, struct isp1760_qtd *qtd, + struct ptd *ptd) +{ + u32 maxpacket; + u32 multi; + u32 rl = RL_COUNTER; + u32 nak = NAK_COUNTER; + u8 portnr; + u8 hubaddr; + + memset(ptd, 0, sizeof(*ptd)); + + /* according to 3.6.2, max packet len can not be > 0x400 */ + maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe); + multi = 1 + ((maxpacket >> 11) & 0x3); + maxpacket &= 0x7ff; + + /* DW0 */ + ptd->dw0 = DW0_VALID_BIT; + ptd->dw0 |= TO_DW0_LENGTH(qtd->length); + ptd->dw0 |= TO_DW0_MAXPACKET(maxpacket); + ptd->dw0 |= TO_DW0_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe)); + + /* DW1 */ + ptd->dw1 = TO_DW((usb_pipeendpoint(qtd->urb->pipe) >> 1)); + ptd->dw1 |= TO_DW1_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe)); + ptd->dw1 |= TO_DW1_PID_TOKEN(qtd->packet_type); + + if (usb_pipebulk(qtd->urb->pipe)) + ptd->dw1 |= DW1_TRANS_BULK; + else if (usb_pipeint(qtd->urb->pipe)) + ptd->dw1 |= DW1_TRANS_INT; + + if (qtd->urb->dev->speed != USB_SPEED_HIGH) { + /* split transaction */ + + ptd->dw1 |= DW1_TRANS_SPLIT; + if (qtd->urb->dev->speed == USB_SPEED_LOW) + ptd->dw1 |= DW1_SE_USB_LOSPEED; + + if (!qtd->urb->dev->dev->parent_priv_) { + portnr = qtd->urb->dev->portnr; + hubaddr = qtd->urb->dev->devnum; + } else { + usb_find_usb2_hub_address_port(qtd->urb->dev, &hubaddr, + &portnr); + } + + ptd->dw1 |= TO_DW1_PORT_NUM(portnr); + ptd->dw1 |= TO_DW1_HUB_NUM(hubaddr); + + /* SE bit for Split INT transfers */ + if (usb_pipeint(qtd->urb->pipe) && + qtd->urb->dev->speed == USB_SPEED_LOW) + ptd->dw1 |= DW1_SE_USB_LOSPEED; + + rl = 0; + nak = 0; + } else { + ptd->dw0 |= TO_DW0_MULTI(multi); + if (usb_pipecontrol(qtd->urb->pipe) || + usb_pipebulk(qtd->urb->pipe)) + ptd->dw3 |= TO_DW3_PING(qh->ping); + } + /* DW2 */ + ptd->dw2 = 0; + ptd->dw2 |= TO_DW2_DATA_START_ADDR(base_to_chip(qtd->payload_addr)); + ptd->dw2 |= TO_DW2_RL(rl); + + /* DW3 */ + ptd->dw3 |= TO_DW3_NAKCOUNT(nak); + ptd->dw3 |= TO_DW3_DATA_TOGGLE(qh->toggle); + + if (usb_pipecontrol(qtd->urb->pipe)) { + if (qtd->data_buffer == qtd->urb->setup_packet) + ptd->dw3 &= ~TO_DW3_DATA_TOGGLE(1); + else if (last_qtd_of_urb(qtd, qh)) + ptd->dw3 |= TO_DW3_DATA_TOGGLE(1); + } + + ptd->dw3 |= DW3_ACTIVE_BIT; + /* Cerr */ + ptd->dw3 |= TO_DW3_CERR(ERR_COUNTER); +} + +static void transform_add_int(struct isp1760_qh *qh, struct isp1760_qtd *qtd, + struct ptd *ptd) +{ + struct usb_host_endpoint *hep = qtd->urb->ep; + struct usb_endpoint_descriptor *epd = &hep->desc; + u32 usof; + u32 period; + + /* + * Most of this is guessing. ISP1761 datasheet is quite unclear, and + * the algorithm from the original Philips driver code, which was + * pretty much used in this driver before as well, is quite horrendous + * and, i believe, incorrect. The code below follows the datasheet and + * USB2.0 spec as far as I can tell, and plug/unplug seems to be much + * more reliable this way (fingers crossed...). + */ + + if (qtd->urb->dev->speed == USB_SPEED_HIGH) { + /* urb->interval is in units of microframes (1/8 ms) */ + period = epd->bInterval >> 3; + + if (epd->bInterval > 4) + usof = 0x01; /* One bit set => interval 1 ms * uFrame-match */ + else if (epd->bInterval > 2) + usof = 0x22; /* Two bits set => interval 1/2 ms */ + else if (epd->bInterval > 1) + usof = 0x55; /* Four bits set => interval 1/4 ms */ + else + usof = 0xff; /* All bits set => interval 1/8 ms */ + } else { + /* urb->interval is in units of frames (1 ms) */ + period = epd->bInterval; + /* Execute Start Split on any of the four first uFrames */ + usof = 0x0f; + + /* + * First 8 bits in dw5 is uSCS and "specifies which uSOF the + * complete split needs to be sent. Valid only for IN." Also, + * "All bits can be set to one for every transfer." (p 82, + * ISP1761 data sheet.) 0x1c is from Philips driver. Where did + * that number come from? 0xff seems to work fine... + */ + /* Execute Complete Split on any uFrame */ + ptd->dw5 = TO_DW(0xff); + } + + /* Ensure equal or shorter period than requested */ + period = period >> 1; + /* Mask off too large values and lowest unused 3 bits */ + period &= 0xf8; + + ptd->dw2 |= TO_DW(period); + ptd->dw4 = TO_DW(usof); +} + +static void create_ptd_int(struct isp1760_qh *qh, struct isp1760_qtd *qtd, + struct ptd *ptd) +{ + create_ptd_atl(qh, qtd, ptd); + transform_add_int(qh, qtd, ptd); +} + +static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb) +{ + if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) { + void *ptr; + + for (ptr = urb->transfer_buffer; + ptr < urb->transfer_buffer + urb->transfer_buffer_length; + ptr += PAGE_SIZE) + flush_dcache_range((unsigned long)ptr, + (unsigned long)ptr + PAGE_SIZE); + } + + /* complete() can reenter this HCD */ + usb_hcd_unlink_urb_from_ep(hcd, urb); + usb_hcd_giveback_urb(hcd, urb, urb->status); +} + +static struct isp1760_qtd *qtd_alloc(gfp_t flags, struct urb *urb, + u8 packet_type) +{ + struct isp1760_qtd *qtd; + + qtd = kmem_cache_alloc(qtd_cachep, flags); + if (!qtd) + return NULL; + + memset(qtd, '\0', sizeof(*qtd)); + INIT_LIST_HEAD(&qtd->qtd_list); + qtd->urb = urb; + qtd->packet_type = packet_type; + qtd->status = QTD_ENQUEUED; + qtd->actual_length = 0; + + return qtd; +} + +static void qtd_free(struct isp1760_qtd *qtd) +{ + WARN_ON(qtd->payload_addr); + kmem_cache_free(qtd_cachep, qtd); +} + +static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot, + struct isp1760_slotinfo *slots, + struct isp1760_qtd *qtd, struct isp1760_qh *qh, + struct ptd *ptd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + const struct isp1760_memory_layout *mem = priv->memory_layout; + int skip_map; + + WARN_ON((slot < 0) || (slot > mem->slot_num - 1)); + WARN_ON(qtd->length && !qtd->payload_addr); + WARN_ON(slots[slot].qtd); + WARN_ON(slots[slot].qh); + WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC); + + if (priv->is_isp1763) + ndelay(100); + + /* Make sure done map has not triggered from some unlinked transfer */ + if (ptd_offset == ATL_PTD_OFFSET) { + skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP); + isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, + skip_map | (1 << slot)); + priv->atl_done_map |= isp1760_hcd_read(hcd, HC_ATL_PTD_DONEMAP); + priv->atl_done_map &= ~(1 << slot); + } else { + skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP); + isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, + skip_map | (1 << slot)); + priv->int_done_map |= isp1760_hcd_read(hcd, HC_INT_PTD_DONEMAP); + priv->int_done_map &= ~(1 << slot); + } + + skip_map &= ~(1 << slot); + qh->slot = slot; + qtd->status = QTD_XFER_STARTED; + slots[slot].qtd = qtd; + slots[slot].qh = qh; + + ptd_write(hcd, ptd_offset, slot, ptd); + + if (ptd_offset == ATL_PTD_OFFSET) + isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map); + else + isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map); +} + +static int is_short_bulk(struct isp1760_qtd *qtd) +{ + return (usb_pipebulk(qtd->urb->pipe) && + (qtd->actual_length < qtd->length)); +} + +static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh, + struct list_head *urb_list) +{ + struct isp1760_qtd *qtd, *qtd_next; + struct urb_listitem *urb_listitem; + int last_qtd; + + list_for_each_entry_safe(qtd, qtd_next, &qh->qtd_list, qtd_list) { + if (qtd->status < QTD_XFER_COMPLETE) + break; + + last_qtd = last_qtd_of_urb(qtd, qh); + + if (!last_qtd && qtd->status == QTD_RETIRE) + qtd_next->status = QTD_RETIRE; + + if (qtd->status == QTD_XFER_COMPLETE) { + if (qtd->actual_length) { + switch (qtd->packet_type) { + case IN_PID: + mem_read(hcd, qtd->payload_addr, + qtd->data_buffer, + qtd->actual_length); + fallthrough; + case OUT_PID: + qtd->urb->actual_length += + qtd->actual_length; + fallthrough; + case SETUP_PID: + break; + } + } + + if (is_short_bulk(qtd)) { + if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK) + qtd->urb->status = -EREMOTEIO; + if (!last_qtd) + qtd_next->status = QTD_RETIRE; + } + } + + if (qtd->payload_addr) + free_mem(hcd, qtd); + + if (last_qtd) { + if (qtd->status == QTD_RETIRE && + qtd->urb->status == -EINPROGRESS) + qtd->urb->status = -EPIPE; + + /* Defer calling of urb_done() since it releases lock */ + urb_listitem = kmem_cache_alloc(urb_listitem_cachep, + GFP_ATOMIC); + if (unlikely(!urb_listitem)) + break; /* Try again on next call */ + urb_listitem->urb = qtd->urb; + list_add_tail(&urb_listitem->urb_list, urb_list); + } + + list_del(&qtd->qtd_list); + qtd_free(qtd); + } +} + +#define ENQUEUE_DEPTH 2 +static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + const struct isp1760_memory_layout *mem = priv->memory_layout; + int slot_num = mem->slot_num; + int ptd_offset; + struct isp1760_slotinfo *slots; + int curr_slot, free_slot; + int n; + struct ptd ptd; + struct isp1760_qtd *qtd; + + if (unlikely(list_empty(&qh->qtd_list))) + return; + + /* Make sure this endpoint's TT buffer is clean before queueing ptds */ + if (qh->tt_buffer_dirty) + return; + + if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd, + qtd_list)->urb->pipe)) { + ptd_offset = INT_PTD_OFFSET; + slots = priv->int_slots; + } else { + ptd_offset = ATL_PTD_OFFSET; + slots = priv->atl_slots; + } + + free_slot = -1; + for (curr_slot = 0; curr_slot < slot_num; curr_slot++) { + if (free_slot == -1 && !slots[curr_slot].qtd) + free_slot = curr_slot; + if (slots[curr_slot].qh == qh) + break; + } + + n = 0; + list_for_each_entry(qtd, &qh->qtd_list, qtd_list) { + if (qtd->status == QTD_ENQUEUED) { + WARN_ON(qtd->payload_addr); + alloc_mem(hcd, qtd); + if (qtd->length && !qtd->payload_addr) + break; + + if (qtd->length && (qtd->packet_type == SETUP_PID || + qtd->packet_type == OUT_PID)) { + mem_write(hcd, qtd->payload_addr, + qtd->data_buffer, qtd->length); + } + + qtd->status = QTD_PAYLOAD_ALLOC; + } + + if (qtd->status == QTD_PAYLOAD_ALLOC) { + /* Start xfer for this endpoint if not already done */ + if ((curr_slot > slot_num - 1) && (free_slot > -1)) { + if (usb_pipeint(qtd->urb->pipe)) + create_ptd_int(qh, qtd, &ptd); + else + create_ptd_atl(qh, qtd, &ptd); + + start_bus_transfer(hcd, ptd_offset, free_slot, + slots, qtd, qh, &ptd); + curr_slot = free_slot; + } + + n++; + if (n >= ENQUEUE_DEPTH) + break; + } + } +} + +static void schedule_ptds(struct usb_hcd *hcd) +{ + struct isp1760_hcd *priv; + struct isp1760_qh *qh, *qh_next; + struct list_head *ep_queue; + LIST_HEAD(urb_list); + struct urb_listitem *urb_listitem, *urb_listitem_next; + int i; + + if (!hcd) { + WARN_ON(1); + return; + } + + priv = hcd_to_priv(hcd); + + /* + * check finished/retired xfers, transfer payloads, call urb_done() + */ + for (i = 0; i < QH_END; i++) { + ep_queue = &priv->qh_list[i]; + list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) + collect_qtds(hcd, qh, &urb_list); + } + + list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list, + urb_list) { + isp1760_urb_done(hcd, urb_listitem->urb); + kmem_cache_free(urb_listitem_cachep, urb_listitem); + } + + /* + * Schedule packets for transfer. + * + * According to USB2.0 specification: + * + * 1st prio: interrupt xfers, up to 80 % of bandwidth + * 2nd prio: control xfers + * 3rd prio: bulk xfers + * + * ... but let's use a simpler scheme here (mostly because ISP1761 doc + * is very unclear on how to prioritize traffic): + * + * 1) Enqueue any queued control transfers, as long as payload chip mem + * and PTD ATL slots are available. + * 2) Enqueue any queued INT transfers, as long as payload chip mem + * and PTD INT slots are available. + * 3) Enqueue any queued bulk transfers, as long as payload chip mem + * and PTD ATL slots are available. + * + * Use double buffering (ENQUEUE_DEPTH==2) as a compromise between + * conservation of chip mem and performance. + * + * I'm sure this scheme could be improved upon! + */ + for (i = 0; i < QH_END; i++) { + ep_queue = &priv->qh_list[i]; + list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) + enqueue_qtds(hcd, qh); + } +} + +#define PTD_STATE_QTD_DONE 1 +#define PTD_STATE_QTD_RELOAD 2 +#define PTD_STATE_URB_RETIRE 3 + +static int check_int_transfer(struct usb_hcd *hcd, struct ptd *ptd, + struct urb *urb) +{ + u32 dw4; + int i; + + dw4 = TO_U32(ptd->dw4); + dw4 >>= 8; + + /* + * FIXME: ISP1761 datasheet does not say what to do with these. Do we + * need to handle these errors? Is it done in hardware? + */ + if (ptd->dw3 & DW3_HALT_BIT) { + urb->status = -EPROTO; /* Default unknown error */ + + for (i = 0; i < 8; i++) { + switch (dw4 & 0x7) { + case INT_UNDERRUN: + printf("underrun during uFrame %d\n", i); + urb->status = -ECOMM; /* Could not write data */ + break; + case INT_EXACT: + printf("transaction error uFrame %d\n", i); + /* timeout, bad CRC, PID error etc. */ + urb->status = -EPROTO; + break; + case INT_BABBLE: + printf("babble error during uFrame %d\n", i); + urb->status = -EOVERFLOW; + break; + } + dw4 >>= 3; + } + + return PTD_STATE_URB_RETIRE; + } + + return PTD_STATE_QTD_DONE; +} + +static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd, + struct urb *urb) +{ + WARN_ON(!ptd); + if (ptd->dw3 & DW3_HALT_BIT) { + if (ptd->dw3 & DW3_BABBLE_BIT) + urb->status = -EOVERFLOW; + else if (FROM_DW3_CERR(ptd->dw3)) + urb->status = -EPIPE; /* Stall */ + else + urb->status = -EPROTO; /* Unknown */ + + /* + * useful debug + * printf("%s: ptd error:\n" + * " dw0: %08x dw1: %08x dw2: %08x dw3: %08x\n" + * " dw4: %08x dw5: %08x dw6: %08x dw7: %08x\n", + * __func__, + * ptd->dw0, ptd->dw1, ptd->dw2, ptd->dw3, + * ptd->dw4, ptd->dw5, ptd->dw6, ptd->dw7); + */ + + return PTD_STATE_URB_RETIRE; + } + + /* Transfer Error, *but* active and no HALT -> reload */ + if ((ptd->dw3 & DW3_ERROR_BIT) && (ptd->dw3 & DW3_ACTIVE_BIT)) + return PTD_STATE_QTD_RELOAD; + + /* + * NAKs are handled in HW by the chip. Usually if the + * device is not able to send data fast enough. + * This happens mostly on slower hardware. + */ + if (!FROM_DW3_NAKCOUNT(ptd->dw3) && (ptd->dw3 & DW3_ACTIVE_BIT)) + return PTD_STATE_QTD_RELOAD; + + return PTD_STATE_QTD_DONE; +} + +static void handle_done_ptds(struct usb_hcd *hcd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + struct isp1760_slotinfo *slots; + struct isp1760_qtd *qtd; + struct isp1760_qh *qh; + struct ptd ptd; + u32 ptd_offset; + int modified; + int skip_map; + int state; + int slot; + + skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP); + priv->int_done_map &= ~skip_map; + skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP); + priv->atl_done_map &= ~skip_map; + + modified = priv->int_done_map || priv->atl_done_map; + + while (priv->int_done_map || priv->atl_done_map) { + if (priv->int_done_map) { + /* INT ptd */ + slot = __ffs(priv->int_done_map); + priv->int_done_map &= ~(1 << slot); + slots = priv->int_slots; + /* + * This should not trigger, and could be removed if + * noone have any problems with it triggering: + */ + if (!slots[slot].qh) { + WARN_ON(1); + continue; + } + ptd_offset = INT_PTD_OFFSET; + ptd_read(hcd, INT_PTD_OFFSET, slot, &ptd); + state = check_int_transfer(hcd, &ptd, + slots[slot].qtd->urb); + } else { + /* ATL ptd */ + slot = __ffs(priv->atl_done_map); + priv->atl_done_map &= ~(1 << slot); + slots = priv->atl_slots; + /* + * This should not trigger, and could be removed if + * noone have any problems with it triggering: + */ + if (!slots[slot].qh) { + WARN_ON(1); + continue; + } + ptd_offset = ATL_PTD_OFFSET; + ptd_read(hcd, ATL_PTD_OFFSET, slot, &ptd); + state = check_atl_transfer(hcd, &ptd, + slots[slot].qtd->urb); + } + + qtd = slots[slot].qtd; + slots[slot].qtd = NULL; + qh = slots[slot].qh; + slots[slot].qh = NULL; + qh->slot = -1; + + WARN_ON(qtd->status != QTD_XFER_STARTED); + + switch (state) { + case PTD_STATE_QTD_DONE: + if (usb_pipeint(qtd->urb->pipe) && + qtd->urb->dev->speed != USB_SPEED_HIGH) + qtd->actual_length = + FROM_DW3_SCS_NRBYTESTRANSFERRED(ptd.dw3); + else + qtd->actual_length = + FROM_DW3_NRBYTESTRANSFERRED(ptd.dw3); + + qtd->status = QTD_XFER_COMPLETE; + + if (list_is_last(&qtd->qtd_list, &qh->qtd_list) || + is_short_bulk(qtd)) + qtd = NULL; + else + qtd = list_entry(qtd->qtd_list.next, + typeof(*qtd), qtd_list); + + qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3); + qh->ping = FROM_DW3_PING(ptd.dw3); + + break; + + case PTD_STATE_QTD_RELOAD: /* QTD_RETRY, for atls only */ + qtd->status = QTD_PAYLOAD_ALLOC; + ptd.dw0 |= DW0_VALID_BIT; + /* RL counter = ERR counter */ + ptd.dw3 &= ~TO_DW3_NAKCOUNT(0xf); + ptd.dw3 |= TO_DW3_NAKCOUNT(FROM_DW2_RL(ptd.dw2)); + ptd.dw3 &= ~TO_DW3_CERR(3); + ptd.dw3 |= TO_DW3_CERR(ERR_COUNTER); + + qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3); + qh->ping = FROM_DW3_PING(ptd.dw3); + break; + + case PTD_STATE_URB_RETIRE: + qtd->status = QTD_RETIRE; + qtd = NULL; + qh->toggle = 0; + qh->ping = 0; + break; + + default: + WARN_ON(1); + continue; + } + + if (qtd && qtd->status == QTD_PAYLOAD_ALLOC) { + if (slots == priv->int_slots) { + if (state == PTD_STATE_QTD_RELOAD) + dev_err(priv->dev, + "PTD_STATE_QTD_RELOAD on interrupt packet\n"); + if (state != PTD_STATE_QTD_RELOAD) + create_ptd_int(qh, qtd, &ptd); + } else { + if (state != PTD_STATE_QTD_RELOAD) + create_ptd_atl(qh, qtd, &ptd); + } + + start_bus_transfer(hcd, ptd_offset, slot, slots, qtd, + qh, &ptd); + } + } + + if (modified) + schedule_ptds(hcd); +} + +static irqreturn_t isp1760_irq(int irq, void *__hci) +{ + struct usb_hcd *hcd = __hci; + struct isp1760_hcd *priv = hcd_to_priv(hcd); + irqreturn_t irqret = IRQ_NONE; + u32 int_reg; + u32 imask; + + imask = isp1760_hcd_read(hcd, HC_INTERRUPT); + if (unlikely(!imask)) + return irqret; + + int_reg = priv->is_isp1763 ? ISP1763_HC_INTERRUPT : + ISP176x_HC_INTERRUPT; + isp1760_reg_write(priv->regs, int_reg, imask); + + priv->int_done_map |= isp1760_hcd_read(hcd, HC_INT_PTD_DONEMAP); + priv->atl_done_map |= isp1760_hcd_read(hcd, HC_ATL_PTD_DONEMAP); + + handle_done_ptds(hcd); + + irqret = IRQ_HANDLED; + + return irqret; +} + +static int isp1763_run(struct usb_hcd *hcd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + int retval; + u32 chipid_h; + u32 chipid_l; + u32 chip_rev; + u32 ptd_atl_int; + u32 ptd_iso; + + chipid_h = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH); + chipid_l = isp1760_hcd_read(hcd, HC_CHIP_ID_LOW); + chip_rev = isp1760_hcd_read(hcd, HC_CHIP_REV); + printf("USB ISP %02x%02x HW rev. %d started\n", chipid_h, + chipid_l, chip_rev); + + isp1760_hcd_clear(hcd, ISO_BUF_FILL); + isp1760_hcd_clear(hcd, INT_BUF_FILL); + isp1760_hcd_clear(hcd, ATL_BUF_FILL); + + isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP); + isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP); + isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP); + ndelay(100); + isp1760_hcd_clear(hcd, HC_ATL_PTD_DONEMAP); + isp1760_hcd_clear(hcd, HC_INT_PTD_DONEMAP); + isp1760_hcd_clear(hcd, HC_ISO_PTD_DONEMAP); + + isp1760_hcd_set(hcd, HW_OTG_DISABLE); + isp1760_reg_write(priv->regs, ISP1763_HC_OTG_CTRL_CLEAR, BIT(7)); + isp1760_reg_write(priv->regs, ISP1763_HC_OTG_CTRL_CLEAR, BIT(15)); + mdelay(10); + + isp1760_hcd_set(hcd, HC_INT_IRQ_ENABLE); + isp1760_hcd_set(hcd, HC_ATL_IRQ_ENABLE); + + isp1760_hcd_set(hcd, HW_GLOBAL_INTR_EN); + + isp1760_hcd_clear(hcd, HC_ATL_IRQ_MASK_AND); + isp1760_hcd_clear(hcd, HC_INT_IRQ_MASK_AND); + isp1760_hcd_clear(hcd, HC_ISO_IRQ_MASK_AND); + + isp1760_hcd_set(hcd, HC_ATL_IRQ_MASK_OR); + isp1760_hcd_set(hcd, HC_INT_IRQ_MASK_OR); + isp1760_hcd_set(hcd, HC_ISO_IRQ_MASK_OR); + + ptd_atl_int = 0x8000; + ptd_iso = 0x0001; + + isp1760_hcd_write(hcd, HC_ATL_PTD_LASTPTD, ptd_atl_int); + isp1760_hcd_write(hcd, HC_INT_PTD_LASTPTD, ptd_atl_int); + isp1760_hcd_write(hcd, HC_ISO_PTD_LASTPTD, ptd_iso); + + isp1760_hcd_set(hcd, ATL_BUF_FILL); + isp1760_hcd_set(hcd, INT_BUF_FILL); + + isp1760_hcd_clear(hcd, CMD_LRESET); + isp1760_hcd_clear(hcd, CMD_RESET); + + retval = isp1760_hcd_set_and_wait(hcd, CMD_RUN, 250 * 1000); + if (retval) + return retval; + + down_write(&ehci_cf_port_reset_rwsem); + retval = isp1760_hcd_set_and_wait(hcd, FLAG_CF, 250 * 1000); + up_write(&ehci_cf_port_reset_rwsem); + if (retval) + return retval; + + return 0; +} + +static int isp1760_run(struct usb_hcd *hcd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + int retval; + u32 chipid_h; + u32 chipid_l; + u32 chip_rev; + u32 ptd_atl_int; + u32 ptd_iso; + + /* + * ISP1763 have some differences in the setup and order to enable + * the ports, disable otg, setup buffers, and ATL, INT, ISO status. + * So, just handle it a separate sequence. + */ + if (priv->is_isp1763) + return isp1763_run(hcd); + + /* Set PTD interrupt AND & OR maps */ + isp1760_hcd_clear(hcd, HC_ATL_IRQ_MASK_AND); + isp1760_hcd_clear(hcd, HC_INT_IRQ_MASK_AND); + isp1760_hcd_clear(hcd, HC_ISO_IRQ_MASK_AND); + + isp1760_hcd_set(hcd, HC_ATL_IRQ_MASK_OR); + isp1760_hcd_set(hcd, HC_INT_IRQ_MASK_OR); + isp1760_hcd_set(hcd, HC_ISO_IRQ_MASK_OR); + + /* step 23 passed */ + + isp1760_hcd_set(hcd, HW_GLOBAL_INTR_EN); + + isp1760_hcd_clear(hcd, CMD_LRESET); + isp1760_hcd_clear(hcd, CMD_RESET); + + retval = isp1760_hcd_set_and_wait(hcd, CMD_RUN, 250 * 1000); + if (retval) + return retval; + + /* + * XXX + * Spec says to write FLAG_CF as last config action, priv code grabs + * the semaphore while doing so. + */ + down_write(&ehci_cf_port_reset_rwsem); + + retval = isp1760_hcd_set_and_wait(hcd, FLAG_CF, 250 * 1000); + up_write(&ehci_cf_port_reset_rwsem); + if (retval) + return retval; + + chipid_h = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH); + chipid_l = isp1760_hcd_read(hcd, HC_CHIP_ID_LOW); + chip_rev = isp1760_hcd_read(hcd, HC_CHIP_REV); + dev_info(priv->dev, "USB ISP %02x%02x HW rev. %d started\n", + chipid_h, chipid_l, chip_rev); + + /* PTD Register Init Part 2, Step 28 */ + + /* Setup registers controlling PTD checking */ + ptd_atl_int = 0x80000000; + ptd_iso = 0x00000001; + + isp1760_hcd_write(hcd, HC_ATL_PTD_LASTPTD, ptd_atl_int); + isp1760_hcd_write(hcd, HC_INT_PTD_LASTPTD, ptd_atl_int); + isp1760_hcd_write(hcd, HC_ISO_PTD_LASTPTD, ptd_iso); + + isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP); + isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP); + isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP); + + isp1760_hcd_set(hcd, ATL_BUF_FILL); + isp1760_hcd_set(hcd, INT_BUF_FILL); + + /* GRR this is run-once init(), being done every time the HC starts. + * So long as they're part of class devices, we can't do it init() + * since the class device isn't created that early. + */ + return 0; +} + +static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len) +{ + qtd->data_buffer = databuffer; + + qtd->length = len; + + return qtd->length; +} + +static void qtd_list_free(struct list_head *qtd_list) +{ + struct isp1760_qtd *qtd, *qtd_next; + + list_for_each_entry_safe(qtd, qtd_next, qtd_list, qtd_list) { + list_del(&qtd->qtd_list); + qtd_free(qtd); + } +} + +/* + * Packetize urb->transfer_buffer into list of packets of size wMaxPacketSize. + * Also calculate the PID type (SETUP/IN/OUT) for each packet. + */ +#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) +static void packetize_urb(struct usb_hcd *hcd, struct urb *urb, + struct list_head *head, gfp_t flags) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + const struct isp1760_memory_layout *mem = priv->memory_layout; + struct isp1760_qtd *qtd; + void *buf; + int len, maxpacketsize; + u8 packet_type; + + /* + * URBs map to sequences of QTDs: one logical transaction + */ + + if (!urb->transfer_buffer && urb->transfer_buffer_length) { + /* XXX This looks like usb storage / SCSI bug */ + dev_err(priv->dev, "buf is null, dma is %08lx len is %d\n", + (unsigned long)urb->transfer_dma, + urb->transfer_buffer_length); + WARN_ON(1); + } + + if (usb_pipein(urb->pipe)) + packet_type = IN_PID; + else + packet_type = OUT_PID; + + if (usb_pipecontrol(urb->pipe)) { + qtd = qtd_alloc(flags, urb, SETUP_PID); + if (!qtd) + goto cleanup; + qtd_fill(qtd, urb->setup_packet, sizeof(struct usb_ctrlrequest)); + list_add_tail(&qtd->qtd_list, head); + + /* for zero length DATA stages, STATUS is always IN */ + if (urb->transfer_buffer_length == 0) + packet_type = IN_PID; + } + + maxpacketsize = max_packet(usb_maxpacket(urb->dev, urb->pipe)); + + /* + * buffer gets wrapped in one or more qtds; + * last one may be "short" (including zero len) + * and may serve as a control status ack + */ + buf = urb->transfer_buffer; + len = urb->transfer_buffer_length; + + for (;;) { + int this_qtd_len; + + qtd = qtd_alloc(flags, urb, packet_type); + if (!qtd) + goto cleanup; + + if (len > mem->blocks_size[ISP176x_BLOCK_NUM - 1]) + this_qtd_len = mem->blocks_size[ISP176x_BLOCK_NUM - 1]; + else + this_qtd_len = len; + + this_qtd_len = qtd_fill(qtd, buf, this_qtd_len); + list_add_tail(&qtd->qtd_list, head); + + len -= this_qtd_len; + buf += this_qtd_len; + + if (len <= 0) + break; + } + + /* + * control requests may need a terminating data "status" ack; + * bulk ones may need a terminating short packet (zero length). + */ + if (urb->transfer_buffer_length != 0) { + int one_more = 0; + + if (usb_pipecontrol(urb->pipe)) { + one_more = 1; + if (packet_type == IN_PID) + packet_type = OUT_PID; + else + packet_type = IN_PID; + } else if (usb_pipebulk(urb->pipe) && maxpacketsize && + (urb->transfer_flags & URB_ZERO_PACKET) && + !(urb->transfer_buffer_length % maxpacketsize)) { + one_more = 1; + } + if (one_more) { + qtd = qtd_alloc(flags, urb, packet_type); + if (!qtd) + goto cleanup; + + /* never any data in such packets */ + qtd_fill(qtd, NULL, 0); + list_add_tail(&qtd->qtd_list, head); + } + } + + return; + +cleanup: + qtd_list_free(head); +} + +static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + struct isp1760_qh *qh = NULL; + struct list_head *ep_queue; + LIST_HEAD(new_qtds); + int qh_in_queue; + int retval; + int epnum; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + ep_queue = &priv->qh_list[QH_CONTROL]; + break; + case PIPE_BULK: + ep_queue = &priv->qh_list[QH_BULK]; + break; + case PIPE_INTERRUPT: + ep_queue = &priv->qh_list[QH_INTERRUPT]; + break; + case PIPE_ISOCHRONOUS: + printf("isochronous USB packets not yet supported\n"); + return -EPIPE; + default: + printf("unknown pipe type\n"); + return -EPIPE; + } + + if (usb_pipein(urb->pipe)) + urb->actual_length = 0; + + packetize_urb(hcd, urb, &new_qtds, mem_flags); + if (list_empty(&new_qtds)) + return -ENOMEM; + + retval = usb_hcd_link_urb_to_ep(hcd, urb); + if (retval) { + qtd_list_free(&new_qtds); + goto out; + } + + epnum = usb_pipeendpoint(urb->pipe); + + qh_in_queue = 0; + list_for_each_entry(qh, ep_queue, qh_list) { + if (qh->epnum == epnum) { + qh_in_queue = 1; + break; + } + } + + if (!qh_in_queue) { + qh = qh_alloc(GFP_ATOMIC); + if (!qh) { + retval = -ENOMEM; + usb_hcd_unlink_urb_from_ep(hcd, urb); + qtd_list_free(&new_qtds); + goto out; + } + + qh->epnum = epnum; + list_add_tail(&qh->qh_list, ep_queue); + urb->ep->hcpriv = qh; + } + + list_splice_tail(&new_qtds, &qh->qtd_list); + schedule_ptds(hcd); + +out: + return retval; +} + +static void kill_transfer(struct usb_hcd *hcd, struct urb *urb, + struct isp1760_qh *qh) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + int skip_map; + + WARN_ON(qh->slot == -1); + + /* + * We need to forcefully reclaim the slot since some transfers never + * return, e.g. interrupt transfers and NAKed bulk transfers. + */ + if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) { + if (qh->slot != -1) { + skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP); + skip_map |= (1 << qh->slot); + isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map); + ndelay(100); + } + priv->atl_slots[qh->slot].qh = NULL; + priv->atl_slots[qh->slot].qtd = NULL; + } else { + if (qh->slot != -1) { + skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP); + skip_map |= (1 << qh->slot); + isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map); + } + priv->int_slots[qh->slot].qh = NULL; + priv->int_slots[qh->slot].qtd = NULL; + } + + qh->slot = -1; +} + +/* + * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing + * any active transfer belonging to the urb in the process. + */ +static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh, + struct isp1760_qtd *qtd) +{ + struct urb *urb; + int urb_was_running; + + urb = qtd->urb; + urb_was_running = 0; + list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) { + if (qtd->urb != urb) + break; + + if (qtd->status >= QTD_XFER_STARTED) + urb_was_running = 1; + if (last_qtd_of_urb(qtd, qh) && + qtd->status >= QTD_XFER_COMPLETE) + urb_was_running = 0; + + if (qtd->status == QTD_XFER_STARTED) + kill_transfer(hcd, urb, qh); + qtd->status = QTD_RETIRE; + } +} + +int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct isp1760_qtd *qtd; + struct isp1760_qh *qh; + int retval = 0; + + retval = usb_hcd_check_unlink_urb(hcd, urb, status); + if (retval) + goto out; + + qh = urb->ep->hcpriv; + if (!qh) { + retval = -EINVAL; + goto out; + } + + list_for_each_entry(qtd, &qh->qtd_list, qtd_list) + if (qtd->urb == urb) { + dequeue_urb_from_qtd(hcd, qh, qtd); + list_move(&qtd->qtd_list, &qh->qtd_list); + break; + } + + urb->status = status; + schedule_ptds(hcd); + +out: + return retval; +} + +static void isp1760_hub_descriptor(struct isp1760_hcd *priv, + struct usb_hub_descriptor *desc) +{ + int ports; + u16 temp; + + ports = isp1760_hcd_n_ports(priv->hcd); + + desc->bDescriptorType = USB_DT_HUB; + /* priv 1.0, 2.3.9 says 20ms max */ + desc->bPwrOn2PwrGood = 10; + desc->bHubContrCurrent = 0; + + desc->bNbrPorts = ports; + temp = 1 + (ports / 8); + desc->bLength = 7 + 2 * temp; + + /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + memset(&desc->u.hs.DeviceRemovable[0], 0, temp); + memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); + + /* per-port overcurrent reporting */ + temp = HUB_CHAR_INDV_PORT_OCPM; + if (isp1760_hcd_ppc_is_set(priv->hcd)) + /* per-port power control */ + temp |= HUB_CHAR_INDV_PORT_LPSM; + else + /* no power switching */ + temp |= HUB_CHAR_NO_LPSM; + desc->wHubCharacteristics = cpu_to_le16(temp); +} + +#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E) + +static void check_reset_complete(struct usb_hcd *hcd, int index) +{ + if (!(isp1760_hcd_is_set(hcd, PORT_CONNECT))) + return; + + /* if reset finished and it's still not enabled -- handoff */ + if (!isp1760_hcd_is_set(hcd, PORT_PE)) { + printf("port %d full speed --> companion\n", index + 1); + + isp1760_hcd_set(hcd, PORT_OWNER); + + isp1760_hcd_clear(hcd, PORT_CSC); + } else { + printf("port %d high speed\n", index + 1); + } +} + +static int isp1760_hub_control(struct usb_hcd *hcd, struct usb_device *dev, + unsigned long pipe, void *buffer, int length, + struct devrequest *setup) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + u16 typeReq, wValue, wIndex; + char *buf = buffer; + void *src = NULL; + int src_len = 0; + int retval = 0; + u32 status; + int ports; + + if (!setup) + return -EINVAL; + + ports = isp1760_hcd_n_ports(hcd); + + typeReq = setup->request | (setup->requesttype << 8); + wValue = le16_to_cpu(setup->value); + wIndex = le16_to_cpu(setup->index); + + /* + * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR. + * HCS_INDICATOR may say we can change LEDs to off/amber/green. + * (track current state ourselves) ... blink for diagnostics, + * power, "this is the one", etc. EHCI spec supports this. + */ + + switch (typeReq) { + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + break; + case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: + /* Nothing to do */ + break; + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + switch (wValue & 0xff00) { + case USB_DT_DEVICE << 8: + src = &rh_descriptor.device; + src_len = 0x12; + break; + case USB_DT_CONFIG << 8: + src = &rh_descriptor.config; + src_len = 0x09; + break; + case USB_DT_STRING << 8: + switch (wValue & 0xff) { + case 0: /* Language */ + src = ISP1760_LANGUAGE_DESC; + src_len = 4; + break; + case 1: /* Vendor String */ + src = ISP1760_VENDOR_DESC; + src_len = 14; + break; + case 2: /* Product Name */ + src = ISP1760_PRODUCT_NAME_DESC; + src_len = 42; + break; + default: + goto error; + } + break; + } + break; + case ClearHubFeature: + switch (wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + /* no hub-wide feature/status flags */ + break; + default: + goto error; + } + break; + case ClearPortFeature: + if (!wIndex || wIndex > ports) + goto error; + wIndex--; + + /* + * Even if OWNER is set, so the port is owned by the + * companion controller, hub_wq needs to be able to clear + * the port-change status bits (especially + * USB_PORT_STAT_C_CONNECTION). + */ + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + isp1760_hcd_clear(hcd, PORT_PE); + break; + case USB_PORT_FEAT_C_ENABLE: + /* XXX error? */ + break; + case USB_PORT_FEAT_SUSPEND: + if (isp1760_hcd_is_set(hcd, PORT_RESET)) + goto error; + + if (isp1760_hcd_is_set(hcd, PORT_SUSPEND)) { + if (!isp1760_hcd_is_set(hcd, PORT_PE)) + goto error; + /* resume signaling for 20 msec */ + isp1760_hcd_clear(hcd, PORT_CSC); + isp1760_hcd_set(hcd, PORT_RESUME); + + priv->reset_done = get_timer(0) + 40; + } + break; + case USB_PORT_FEAT_C_SUSPEND: + /* we auto-clear this feature */ + break; + case USB_PORT_FEAT_POWER: + if (isp1760_hcd_ppc_is_set(hcd)) + isp1760_hcd_clear(hcd, PORT_POWER); + break; + case USB_PORT_FEAT_C_CONNECTION: + isp1760_hcd_set(hcd, PORT_CSC); + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + /* XXX error ?*/ + break; + case USB_PORT_FEAT_C_RESET: + /* GetPortStatus clears reset */ + break; + default: + goto error; + } + isp1760_hcd_read(hcd, CMD_RUN); + break; + case GetHubDescriptor: + isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)buf); + break; + case GetHubStatus: + /* no hub-wide feature/status flags */ + memset(buf, 0, 4); + break; + case GetPortStatus: + if (!wIndex || wIndex > ports) + goto error; + wIndex--; + status = 0; + + /* wPortChange bits */ + if (isp1760_hcd_is_set(hcd, PORT_CSC)) + status |= USB_PORT_STAT_C_CONNECTION << 16; + + /* whoever resumes must GetPortStatus to complete it!! */ + if (isp1760_hcd_is_set(hcd, PORT_RESUME)) { + status |= USB_PORT_STAT_C_SUSPEND << 16; + + if (!priv->reset_done) { + priv->reset_done = get_timer(0) + 20; + } else if (get_timer(0) > priv->reset_done) { + /* stop resume signaling */ + isp1760_hcd_clear(hcd, PORT_CSC); + + retval = isp1760_hcd_clear_and_wait(hcd, + PORT_RESUME, + 2000); + if (retval != 0) { + printf("port %d resume error %d\n", + wIndex + 1, retval); + goto error; + } + } + } + + /* whoever resets must GetPortStatus to complete it!! */ + if (isp1760_hcd_is_set(hcd, PORT_RESET) && + get_timer(0) > priv->reset_done) { + status |= USB_PORT_STAT_C_RESET << 16; + priv->reset_done = 0; + + /* force reset to complete */ + /* REVISIT: some hardware needs 550+ usec to clear + * this bit; seems too long to spin routinely... + */ + retval = isp1760_hcd_clear_and_wait(hcd, PORT_RESET, + 750); + if (retval != 0) { + printf("port %d reset error %d\n", wIndex + 1, + retval); + goto error; + } + + /* see what we found out */ + check_reset_complete(hcd, wIndex); + } + /* + * Even if OWNER is set, there's no harm letting hub_wq + * see the wPortStatus values (they should all be 0 except + * for PORT_POWER anyway). + */ + + if (isp1760_hcd_is_set(hcd, PORT_OWNER)) + printf("PORT_OWNER is set\n"); + + if (isp1760_hcd_is_set(hcd, PORT_CONNECT)) { + status |= USB_PORT_STAT_CONNECTION; + + /* status may be from integrated TT */ + status |= USB_PORT_STAT_HIGH_SPEED; + } + if (isp1760_hcd_is_set(hcd, PORT_PE)) + status |= USB_PORT_STAT_ENABLE; + if (isp1760_hcd_is_set(hcd, PORT_SUSPEND) && + isp1760_hcd_is_set(hcd, PORT_RESUME)) + status |= USB_PORT_STAT_SUSPEND; + if (isp1760_hcd_is_set(hcd, PORT_RESET)) + status |= USB_PORT_STAT_RESET; + if (isp1760_hcd_is_set(hcd, PORT_POWER)) + status |= USB_PORT_STAT_POWER; + + put_unaligned(cpu_to_le32(status), (__le32 *)buf); + break; + case SetHubFeature: + switch (wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + /* no hub-wide feature/status flags */ + break; + default: + goto error; + } + break; + case SetPortFeature: + wIndex &= 0xff; + if (!wIndex || wIndex > ports) + goto error; + wIndex--; + + if (isp1760_hcd_is_set(hcd, PORT_OWNER)) + break; + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + isp1760_hcd_set(hcd, PORT_PE); + break; + + case USB_PORT_FEAT_SUSPEND: + if (!isp1760_hcd_is_set(hcd, PORT_PE) || + isp1760_hcd_is_set(hcd, PORT_RESET)) + goto error; + + isp1760_hcd_set(hcd, PORT_SUSPEND); + break; + case USB_PORT_FEAT_POWER: + if (isp1760_hcd_ppc_is_set(hcd)) + isp1760_hcd_set(hcd, PORT_POWER); + break; + case USB_PORT_FEAT_RESET: + if (isp1760_hcd_is_set(hcd, PORT_RESUME)) + goto error; + /* line status bits may report this as low speed, + * which can be fine if this root hub has a + * transaction translator built in. + */ + if ((isp1760_hcd_is_set(hcd, PORT_CONNECT) && + !isp1760_hcd_is_set(hcd, PORT_PE)) && + (isp1760_hcd_read(hcd, PORT_LSTATUS) == 1)) { + isp1760_hcd_set(hcd, PORT_OWNER); + } else { + isp1760_hcd_set(hcd, PORT_RESET); + isp1760_hcd_clear(hcd, PORT_PE); + + priv->reset_done = get_timer(0) + 50; + } + break; + default: + goto error; + } + break; + + default: + printf("root: unknown request: 0x%0x\n", typeReq); + goto error; + } + + if (src_len) { + length = min(src_len, length); + + if (src && length > 0) + memcpy(buffer, src, length); + else + printf("zero copy USB descriptor\n"); + } + + dev->act_len = length; + dev->status = 0; + + return 0; + +error: + /* "stall" on error */ + dev->act_len = 0; + dev->status = USB_ST_STALLED; + return -EPIPE; +} + +int __init isp1760_init_kmem_once(void) +{ + urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem", + sizeof(struct urb_listitem), 0, + SLAB_TEMPORARY | + SLAB_MEM_SPREAD, NULL); + + if (!urb_listitem_cachep) + return -ENOMEM; + + qtd_cachep = kmem_cache_create("isp1760_qtd", + sizeof(struct isp1760_qtd), 0, + SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL); + + if (!qtd_cachep) + goto destroy_urb_listitem; + + qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh), + 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, + NULL); + + if (!qh_cachep) + goto destroy_qtd; + + return 0; + +destroy_qtd: + kmem_cache_destroy(qtd_cachep); + +destroy_urb_listitem: + kmem_cache_destroy(urb_listitem_cachep); + + return -ENOMEM; +} + +void isp1760_deinit_kmem_cache(void) +{ + kmem_cache_destroy(qtd_cachep); + kmem_cache_destroy(qh_cachep); + kmem_cache_destroy(urb_listitem_cachep); +} + +int isp1760_hcd_lowlevel_init(struct isp1760_hcd *priv) +{ + int ret; + + ret = isp1760_hc_setup(priv->hcd); + if (ret < 0) + return ret; + + ret = isp1760_run(priv->hcd); + if (ret < 0) + return ret; + + return 0; +} + +static const struct usb_urb_ops isp1760_urb_ops = { + .urb_enqueue = isp1760_urb_enqueue, + .urb_dequeue = isp1760_urb_dequeue, + .hub_control = isp1760_hub_control, + .isr = isp1760_irq, +}; + +int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem, + int irq, unsigned long irqflags, + struct udevice *dev) +{ + const struct isp1760_memory_layout *mem_layout = priv->memory_layout; + struct isp1760_host_data *host = dev_get_priv(dev); + struct usb_hcd *hcd = &host->hcd; + int ret; + + priv->hcd = hcd; + + hcd->hcd_priv = priv; + + priv->hcd = hcd; + + hcd->urb_ops = &isp1760_urb_ops; + + priv->atl_slots = kcalloc(mem_layout->slot_num, + sizeof(struct isp1760_slotinfo), GFP_KERNEL); + if (!priv->atl_slots) + return -ENOMEM; + + priv->int_slots = kcalloc(mem_layout->slot_num, + sizeof(struct isp1760_slotinfo), GFP_KERNEL); + if (!priv->int_slots) { + ret = -ENOMEM; + goto free_atl_slots; + } + + host->host_speed = USB_SPEED_HIGH; + + init_memory(priv); + + return 0; + +free_atl_slots: + kfree(priv->atl_slots); + + return ret; +} + +void isp1760_hcd_unregister(struct isp1760_hcd *priv) +{ + struct isp1760_qh *qh, *qh_next; + int i; + + for (i = 0; i < QH_END; i++) + list_for_each_entry_safe(qh, qh_next, &priv->qh_list[i], + qh_list) { + qtd_list_free(&qh->qtd_list); + list_del(&qh->qh_list); + qh_free(qh); + } + + kfree(priv->atl_slots); + kfree(priv->int_slots); +} diff --git a/drivers/usb/isp1760/isp1760-hcd.h b/drivers/usb/isp1760/isp1760-hcd.h new file mode 100644 index 00000000000..c47b73906ef --- /dev/null +++ b/drivers/usb/isp1760/isp1760-hcd.h @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ISP1760_HCD_H_ +#define _ISP1760_HCD_H_ + +#include <regmap.h> + +#include "isp1760-regs.h" + +struct isp1760_qh; +struct isp1760_qtd; +struct resource; +struct usb_hcd; + +struct isp1760_slotinfo { + struct isp1760_qh *qh; + struct isp1760_qtd *qtd; + unsigned long timestamp; +}; + +/* chip memory management */ +#define ISP176x_BLOCK_MAX (32 + 20 + 4) +#define ISP176x_BLOCK_NUM 3 + +struct isp1760_memory_layout { + unsigned int blocks[ISP176x_BLOCK_NUM]; + unsigned int blocks_size[ISP176x_BLOCK_NUM]; + + unsigned int slot_num; + unsigned int payload_blocks; + unsigned int payload_area_size; +}; + +struct isp1760_memory_chunk { + unsigned int start; + unsigned int size; + unsigned int free; +}; + +enum isp1760_queue_head_types { + QH_CONTROL, + QH_BULK, + QH_INTERRUPT, + QH_END +}; + +struct isp1760_hcd { + struct usb_hcd *hcd; + struct udevice *dev; + + void __iomem *base; + + struct regmap *regs; + struct regmap_field *fields[HC_FIELD_MAX]; + + bool is_isp1763; + const struct isp1760_memory_layout *memory_layout; + + struct isp1760_slotinfo *atl_slots; + int atl_done_map; + struct isp1760_slotinfo *int_slots; + int int_done_map; + struct isp1760_memory_chunk memory_pool[ISP176x_BLOCK_MAX]; + struct list_head qh_list[QH_END]; + + /* periodic schedule support */ +#define DEFAULT_I_TDPS 1024 + unsigned int periodic_size; + unsigned int i_thresh; + unsigned long reset_done; + unsigned long next_statechange; +}; + +int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem, + int irq, unsigned long irqflags, struct udevice *dev); +void isp1760_hcd_unregister(struct isp1760_hcd *priv); +int isp1760_hcd_lowlevel_init(struct isp1760_hcd *priv); + +int isp1760_init_kmem_once(void); +void isp1760_deinit_kmem_cache(void); + +#endif /* _ISP1760_HCD_H_ */ diff --git a/drivers/usb/isp1760/isp1760-if.c b/drivers/usb/isp1760/isp1760-if.c new file mode 100644 index 00000000000..c96ab459f93 --- /dev/null +++ b/drivers/usb/isp1760/isp1760-if.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org> + * + * based on original code from: + * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de> + */ + +#include <common.h> +#include <dm.h> +#include <dm/device-internal.h> +#include <dm/device_compat.h> +#include <dm/devres.h> +#include <dm/lists.h> +#include <linux/bug.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/usb/otg.h> +#include <log.h> +#include <usb.h> + +#include "isp1760-core.h" +#include "isp1760-regs.h" +#include "isp1760-uboot.h" + +static int isp1760_of_to_plat(struct udevice *dev) +{ + struct isp1760_device *isp = dev_get_plat(dev); + unsigned int devflags = 0; + u32 bus_width = 0; + ofnode dp; + + if (!dev_has_ofnode(dev)) { + /* select isp1763 as the default device */ + devflags = ISP1760_FLAG_ISP1763 | ISP1760_FLAG_BUS_WIDTH_16; + pr_err("isp1760: no platform data\n"); + goto isp_setup; + } + + dp = dev_ofnode(dev); + + if (ofnode_device_is_compatible(dp, "nxp,usb-isp1761")) + devflags |= ISP1760_FLAG_ISP1761; + + if (ofnode_device_is_compatible(dp, "nxp,usb-isp1763")) + devflags |= ISP1760_FLAG_ISP1763; + + /* + * Some systems wire up only 8 of 16 data lines or + * 16 of the 32 data lines + */ + bus_width = ofnode_read_u32_default(dp, "bus-width", 16); + if (bus_width == 16) + devflags |= ISP1760_FLAG_BUS_WIDTH_16; + else if (bus_width == 8) + devflags |= ISP1760_FLAG_BUS_WIDTH_8; + + if (usb_get_dr_mode(dev_ofnode(dev)) == USB_DR_MODE_PERIPHERAL) + devflags |= ISP1760_FLAG_PERIPHERAL_EN; + + if (ofnode_read_bool(dp, "analog-oc")) + devflags |= ISP1760_FLAG_ANALOG_OC; + + if (ofnode_read_bool(dp, "dack-polarity")) + devflags |= ISP1760_FLAG_DACK_POL_HIGH; + + if (ofnode_read_bool(dp, "dreq-polarity")) + devflags |= ISP1760_FLAG_DREQ_POL_HIGH; + +isp_setup: + isp->devflags = devflags; + isp->dev = dev; + + return 0; +} + +static int isp1760_plat_probe(struct udevice *dev) +{ + struct isp1760_device *isp = dev_get_plat(dev); + struct resource mem_res; + struct resource irq_res; + int ret; + + dev_read_resource(dev, 0, &mem_res); + dev_read_resource(dev, 1, &irq_res); + + isp1760_init_kmem_once(); + + ret = isp1760_register(isp, &mem_res, irq_res.start, irq_res.flags); + if (ret < 0) { + isp1760_deinit_kmem_cache(); + return ret; + } + + return 0; +} + +static int isp1760_plat_remove(struct udevice *dev) +{ + struct isp1760_device *isp = dev_get_plat(dev); + + isp1760_deinit_kmem_cache(); + isp1760_unregister(isp); + + return 0; +} + +static const struct udevice_id isp1760_ids[] = { + { .compatible = "nxp,usb-isp1760", }, + { .compatible = "nxp,usb-isp1761", }, + { .compatible = "nxp,usb-isp1763", }, + { }, +}; + +U_BOOT_DRIVER(isp1760) = { + .name = "isp1760", + .id = UCLASS_USB, + .of_match = isp1760_ids, + .of_to_plat = isp1760_of_to_plat, + .ops = &isp1760_usb_ops, + .probe = isp1760_plat_probe, + .remove = isp1760_plat_remove, + .plat_auto = sizeof(struct isp1760_device), + .priv_auto = sizeof(struct isp1760_host_data), +}; diff --git a/drivers/usb/isp1760/isp1760-regs.h b/drivers/usb/isp1760/isp1760-regs.h new file mode 100644 index 00000000000..94ea60c20b2 --- /dev/null +++ b/drivers/usb/isp1760/isp1760-regs.h @@ -0,0 +1,292 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Driver for the NXP ISP1760 chip + * + * Copyright 2021 Linaro, Rui Miguel Silva + * Copyright 2014 Laurent Pinchart + * Copyright 2007 Sebastian Siewior + * + * Contacts: + * Sebastian Siewior <bigeasy@linutronix.de> + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Rui Miguel Silva <rui.silva@linaro.org> + */ + +#ifndef _ISP176x_REGS_H_ +#define _ISP176x_REGS_H_ + +/* ----------------------------------------------------------------------------- + * Host Controller + */ + +/* ISP1760/31 */ +/* EHCI capability registers */ +#define ISP176x_HC_VERSION 0x002 +#define ISP176x_HC_HCSPARAMS 0x004 +#define ISP176x_HC_HCCPARAMS 0x008 + +/* EHCI operational registers */ +#define ISP176x_HC_USBCMD 0x020 +#define ISP176x_HC_USBSTS 0x024 +#define ISP176x_HC_FRINDEX 0x02c + +#define ISP176x_HC_CONFIGFLAG 0x060 +#define ISP176x_HC_PORTSC1 0x064 + +#define ISP176x_HC_ISO_PTD_DONEMAP 0x130 +#define ISP176x_HC_ISO_PTD_SKIPMAP 0x134 +#define ISP176x_HC_ISO_PTD_LASTPTD 0x138 +#define ISP176x_HC_INT_PTD_DONEMAP 0x140 +#define ISP176x_HC_INT_PTD_SKIPMAP 0x144 +#define ISP176x_HC_INT_PTD_LASTPTD 0x148 +#define ISP176x_HC_ATL_PTD_DONEMAP 0x150 +#define ISP176x_HC_ATL_PTD_SKIPMAP 0x154 +#define ISP176x_HC_ATL_PTD_LASTPTD 0x158 + +/* Configuration Register */ +#define ISP176x_HC_HW_MODE_CTRL 0x300 +#define ISP176x_HC_CHIP_ID 0x304 +#define ISP176x_HC_SCRATCH 0x308 +#define ISP176x_HC_RESET 0x30c +#define ISP176x_HC_BUFFER_STATUS 0x334 +#define ISP176x_HC_MEMORY 0x33c + +/* Interrupt Register */ +#define ISP176x_HC_INTERRUPT 0x310 +#define ISP176x_HC_INTERRUPT_ENABLE 0x314 +#define ISP176x_HC_ISO_IRQ_MASK_OR 0x318 +#define ISP176x_HC_INT_IRQ_MASK_OR 0x31c +#define ISP176x_HC_ATL_IRQ_MASK_OR 0x320 +#define ISP176x_HC_ISO_IRQ_MASK_AND 0x324 +#define ISP176x_HC_INT_IRQ_MASK_AND 0x328 +#define ISP176x_HC_ATL_IRQ_MASK_AND 0x32c + +#define ISP176x_HC_OTG_CTRL_SET 0x374 +#define ISP176x_HC_OTG_CTRL_CLEAR 0x376 + +enum isp176x_host_controller_fields { + /* HC_PORTSC1 */ + PORT_OWNER, PORT_POWER, PORT_LSTATUS, PORT_RESET, PORT_SUSPEND, + PORT_RESUME, PORT_PE, PORT_CSC, PORT_CONNECT, + /* HC_HCSPARAMS */ + HCS_PPC, HCS_N_PORTS, + /* HC_HCCPARAMS */ + HCC_ISOC_CACHE, HCC_ISOC_THRES, + /* HC_USBCMD */ + CMD_LRESET, CMD_RESET, CMD_RUN, + /* HC_USBSTS */ + STS_PCD, + /* HC_FRINDEX */ + HC_FRINDEX, + /* HC_CONFIGFLAG */ + FLAG_CF, + /* ISO/INT/ATL PTD */ + HC_ISO_PTD_DONEMAP, HC_ISO_PTD_SKIPMAP, HC_ISO_PTD_LASTPTD, + HC_INT_PTD_DONEMAP, HC_INT_PTD_SKIPMAP, HC_INT_PTD_LASTPTD, + HC_ATL_PTD_DONEMAP, HC_ATL_PTD_SKIPMAP, HC_ATL_PTD_LASTPTD, + /* HC_HW_MODE_CTRL */ + ALL_ATX_RESET, HW_ANA_DIGI_OC, HW_DEV_DMA, HW_COMN_IRQ, HW_COMN_DMA, + HW_DATA_BUS_WIDTH, HW_DACK_POL_HIGH, HW_DREQ_POL_HIGH, HW_INTR_HIGH_ACT, + HW_INTF_LOCK, HW_INTR_EDGE_TRIG, HW_GLOBAL_INTR_EN, + /* HC_CHIP_ID */ + HC_CHIP_ID_HIGH, HC_CHIP_ID_LOW, HC_CHIP_REV, + /* HC_SCRATCH */ + HC_SCRATCH, + /* HC_RESET */ + SW_RESET_RESET_ATX, SW_RESET_RESET_HC, SW_RESET_RESET_ALL, + /* HC_BUFFER_STATUS */ + ISO_BUF_FILL, INT_BUF_FILL, ATL_BUF_FILL, + /* HC_MEMORY */ + MEM_BANK_SEL, MEM_START_ADDR, + /* HC_DATA */ + HC_DATA, + /* HC_INTERRUPT */ + HC_INTERRUPT, + /* HC_INTERRUPT_ENABLE */ + HC_INT_IRQ_ENABLE, HC_ATL_IRQ_ENABLE, + /* INTERRUPT MASKS */ + HC_ISO_IRQ_MASK_OR, HC_INT_IRQ_MASK_OR, HC_ATL_IRQ_MASK_OR, + HC_ISO_IRQ_MASK_AND, HC_INT_IRQ_MASK_AND, HC_ATL_IRQ_MASK_AND, + /* HW_OTG_CTRL_SET */ + HW_OTG_DISABLE, HW_SW_SEL_HC_DC, HW_VBUS_DRV, HW_SEL_CP_EXT, + HW_DM_PULLDOWN, HW_DP_PULLDOWN, HW_DP_PULLUP, HW_HC_2_DIS, + /* HW_OTG_CTRL_CLR */ + HW_OTG_DISABLE_CLEAR, HW_SW_SEL_HC_DC_CLEAR, HW_VBUS_DRV_CLEAR, + HW_SEL_CP_EXT_CLEAR, HW_DM_PULLDOWN_CLEAR, HW_DP_PULLDOWN_CLEAR, + HW_DP_PULLUP_CLEAR, HW_HC_2_DIS_CLEAR, + /* Last element */ + HC_FIELD_MAX, +}; + +/* ISP1763 */ +/* EHCI operational registers */ +#define ISP1763_HC_USBCMD 0x8c +#define ISP1763_HC_USBSTS 0x90 +#define ISP1763_HC_FRINDEX 0x98 + +#define ISP1763_HC_CONFIGFLAG 0x9c +#define ISP1763_HC_PORTSC1 0xa0 + +#define ISP1763_HC_ISO_PTD_DONEMAP 0xa4 +#define ISP1763_HC_ISO_PTD_SKIPMAP 0xa6 +#define ISP1763_HC_ISO_PTD_LASTPTD 0xa8 +#define ISP1763_HC_INT_PTD_DONEMAP 0xaa +#define ISP1763_HC_INT_PTD_SKIPMAP 0xac +#define ISP1763_HC_INT_PTD_LASTPTD 0xae +#define ISP1763_HC_ATL_PTD_DONEMAP 0xb0 +#define ISP1763_HC_ATL_PTD_SKIPMAP 0xb2 +#define ISP1763_HC_ATL_PTD_LASTPTD 0xb4 + +/* Configuration Register */ +#define ISP1763_HC_HW_MODE_CTRL 0xb6 +#define ISP1763_HC_CHIP_REV 0x70 +#define ISP1763_HC_CHIP_ID 0x72 +#define ISP1763_HC_SCRATCH 0x78 +#define ISP1763_HC_RESET 0xb8 +#define ISP1763_HC_BUFFER_STATUS 0xba +#define ISP1763_HC_MEMORY 0xc4 +#define ISP1763_HC_DATA 0xc6 + +/* Interrupt Register */ +#define ISP1763_HC_INTERRUPT 0xd4 +#define ISP1763_HC_INTERRUPT_ENABLE 0xd6 +#define ISP1763_HC_ISO_IRQ_MASK_OR 0xd8 +#define ISP1763_HC_INT_IRQ_MASK_OR 0xda +#define ISP1763_HC_ATL_IRQ_MASK_OR 0xdc +#define ISP1763_HC_ISO_IRQ_MASK_AND 0xde +#define ISP1763_HC_INT_IRQ_MASK_AND 0xe0 +#define ISP1763_HC_ATL_IRQ_MASK_AND 0xe2 + +#define ISP1763_HC_OTG_CTRL_SET 0xe4 +#define ISP1763_HC_OTG_CTRL_CLEAR 0xe6 + +/* ----------------------------------------------------------------------------- + * Peripheral Controller + */ + +#define DC_IEPTX(n) (1 << (11 + 2 * (n))) +#define DC_IEPRX(n) (1 << (10 + 2 * (n))) +#define DC_IEPRXTX(n) (3 << (10 + 2 * (n))) + +#define ISP176x_DC_CDBGMOD_ACK BIT(6) +#define ISP176x_DC_DDBGMODIN_ACK BIT(4) +#define ISP176x_DC_DDBGMODOUT_ACK BIT(2) + +#define ISP176x_DC_IEP0SETUP BIT(8) +#define ISP176x_DC_IEVBUS BIT(7) +#define ISP176x_DC_IEHS_STA BIT(5) +#define ISP176x_DC_IERESM BIT(4) +#define ISP176x_DC_IESUSP BIT(3) +#define ISP176x_DC_IEBRST BIT(0) + +#define ISP176x_DC_ENDPTYP_ISOC 0x01 +#define ISP176x_DC_ENDPTYP_BULK 0x02 +#define ISP176x_DC_ENDPTYP_INTERRUPT 0x03 + +/* Initialization Registers */ +#define ISP176x_DC_ADDRESS 0x0200 +#define ISP176x_DC_MODE 0x020c +#define ISP176x_DC_INTCONF 0x0210 +#define ISP176x_DC_DEBUG 0x0212 +#define ISP176x_DC_INTENABLE 0x0214 + +/* Data Flow Registers */ +#define ISP176x_DC_EPMAXPKTSZ 0x0204 +#define ISP176x_DC_EPTYPE 0x0208 + +#define ISP176x_DC_BUFLEN 0x021c +#define ISP176x_DC_BUFSTAT 0x021e +#define ISP176x_DC_DATAPORT 0x0220 + +#define ISP176x_DC_CTRLFUNC 0x0228 +#define ISP176x_DC_EPINDEX 0x022c + +/* DMA Registers */ +#define ISP176x_DC_DMACMD 0x0230 +#define ISP176x_DC_DMATXCOUNT 0x0234 +#define ISP176x_DC_DMACONF 0x0238 +#define ISP176x_DC_DMAHW 0x023c +#define ISP176x_DC_DMAINTREASON 0x0250 +#define ISP176x_DC_DMAINTEN 0x0254 +#define ISP176x_DC_DMAEP 0x0258 +#define ISP176x_DC_DMABURSTCOUNT 0x0264 + +/* General Registers */ +#define ISP176x_DC_INTERRUPT 0x0218 +#define ISP176x_DC_CHIPID 0x0270 +#define ISP176x_DC_FRAMENUM 0x0274 +#define ISP176x_DC_SCRATCH 0x0278 +#define ISP176x_DC_UNLOCKDEV 0x027c +#define ISP176x_DC_INTPULSEWIDTH 0x0280 +#define ISP176x_DC_TESTMODE 0x0284 + +enum isp176x_device_controller_fields { + /* DC_ADDRESS */ + DC_DEVEN, DC_DEVADDR, + /* DC_MODE */ + DC_VBUSSTAT, DC_SFRESET, DC_GLINTENA, + /* DC_INTCONF */ + DC_CDBGMOD_ACK, DC_DDBGMODIN_ACK, DC_DDBGMODOUT_ACK, DC_INTPOL, + /* DC_INTENABLE */ + DC_IEPRXTX_7, DC_IEPRXTX_6, DC_IEPRXTX_5, DC_IEPRXTX_4, DC_IEPRXTX_3, + DC_IEPRXTX_2, DC_IEPRXTX_1, DC_IEPRXTX_0, + DC_IEP0SETUP, DC_IEVBUS, DC_IEHS_STA, DC_IERESM, DC_IESUSP, DC_IEBRST, + /* DC_EPINDEX */ + DC_EP0SETUP, DC_ENDPIDX, DC_EPDIR, + /* DC_CTRLFUNC */ + DC_CLBUF, DC_VENDP, DC_DSEN, DC_STATUS, DC_STALL, + /* DC_BUFLEN */ + DC_BUFLEN, + /* DC_EPMAXPKTSZ */ + DC_FFOSZ, + /* DC_EPTYPE */ + DC_EPENABLE, DC_ENDPTYP, + /* DC_FRAMENUM */ + DC_FRAMENUM, DC_UFRAMENUM, + /* DC_CHIP_ID */ + DC_CHIP_ID_HIGH, DC_CHIP_ID_LOW, + /* DC_SCRATCH */ + DC_SCRATCH, + /* Last element */ + DC_FIELD_MAX, +}; + +/* ISP1763 */ +/* Initialization Registers */ +#define ISP1763_DC_ADDRESS 0x00 +#define ISP1763_DC_MODE 0x0c +#define ISP1763_DC_INTCONF 0x10 +#define ISP1763_DC_INTENABLE 0x14 + +/* Data Flow Registers */ +#define ISP1763_DC_EPMAXPKTSZ 0x04 +#define ISP1763_DC_EPTYPE 0x08 + +#define ISP1763_DC_BUFLEN 0x1c +#define ISP1763_DC_BUFSTAT 0x1e +#define ISP1763_DC_DATAPORT 0x20 + +#define ISP1763_DC_CTRLFUNC 0x28 +#define ISP1763_DC_EPINDEX 0x2c + +/* DMA Registers */ +#define ISP1763_DC_DMACMD 0x30 +#define ISP1763_DC_DMATXCOUNT 0x34 +#define ISP1763_DC_DMACONF 0x38 +#define ISP1763_DC_DMAHW 0x3c +#define ISP1763_DC_DMAINTREASON 0x50 +#define ISP1763_DC_DMAINTEN 0x54 +#define ISP1763_DC_DMAEP 0x58 +#define ISP1763_DC_DMABURSTCOUNT 0x64 + +/* General Registers */ +#define ISP1763_DC_INTERRUPT 0x18 +#define ISP1763_DC_CHIPID_LOW 0x70 +#define ISP1763_DC_CHIPID_HIGH 0x72 +#define ISP1763_DC_FRAMENUM 0x74 +#define ISP1763_DC_SCRATCH 0x78 +#define ISP1763_DC_UNLOCKDEV 0x7c +#define ISP1763_DC_INTPULSEWIDTH 0x80 +#define ISP1763_DC_TESTMODE 0x84 + +#endif diff --git a/drivers/usb/isp1760/isp1760-uboot.c b/drivers/usb/isp1760/isp1760-uboot.c new file mode 100644 index 00000000000..203500a4cb7 --- /dev/null +++ b/drivers/usb/isp1760/isp1760-uboot.c @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the NXP ISP1760 chip + * + * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org> + * + */ + +#include <common.h> +#include <dm.h> +#include <dm/device-internal.h> +#include <dm/device_compat.h> +#include <dm/devres.h> +#include <dm/lists.h> +#include <linux/bug.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/usb/otg.h> +#include <linux/usb/usb_urb_compat.h> +#include <log.h> +#include <usb.h> + +#include "isp1760-core.h" +#include "isp1760-hcd.h" +#include "isp1760-regs.h" +#include "isp1760-uboot.h" + +static int isp1760_msg_submit_control(struct udevice *dev, + struct usb_device *udev, + unsigned long pipe, void *buffer, + int length, struct devrequest *setup) +{ + struct isp1760_host_data *host = dev_get_priv(dev); + + return usb_urb_submit_control(&host->hcd, &host->urb, &host->hep, udev, + pipe, buffer, length, setup, 0, + host->host_speed); +} + +static int isp1760_msg_submit_bulk(struct udevice *dev, struct usb_device *udev, + unsigned long pipe, void *buffer, int length) +{ + struct isp1760_host_data *host = dev_get_priv(dev); + + return usb_urb_submit_bulk(&host->hcd, &host->urb, &host->hep, udev, + pipe, buffer, length); +} + +static int isp1760_msg_submit_irq(struct udevice *dev, struct usb_device *udev, + unsigned long pipe, void *buffer, int length, + int interval, bool nonblock) +{ + struct isp1760_host_data *host = dev_get_priv(dev); + + return usb_urb_submit_irq(&host->hcd, &host->urb, &host->hep, udev, + pipe, buffer, length, interval); +} + +static int isp1760_get_max_xfer_size(struct udevice *dev, size_t *size) +{ + struct isp1760_host_data *host = dev_get_priv(dev); + struct isp1760_hcd *priv = host->hcd.hcd_priv; + const struct isp1760_memory_layout *mem = priv->memory_layout; + + *size = mem->blocks_size[ISP176x_BLOCK_NUM - 1]; + + return 0; +} + +struct dm_usb_ops isp1760_usb_ops = { + .control = isp1760_msg_submit_control, + .bulk = isp1760_msg_submit_bulk, + .interrupt = isp1760_msg_submit_irq, + .get_max_xfer_size = isp1760_get_max_xfer_size, +}; diff --git a/drivers/usb/isp1760/isp1760-uboot.h b/drivers/usb/isp1760/isp1760-uboot.h new file mode 100644 index 00000000000..812355b48bc --- /dev/null +++ b/drivers/usb/isp1760/isp1760-uboot.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Driver for the NXP ISP1760 chip + * + * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org> + * + */ + +#ifndef __ISP1760_UBOOT_H__ +#define __ISP1760_UBOOT_H__ + +#include <linux/usb/usb_urb_compat.h> +#include <usb.h> + +#include "isp1760-core.h" + +struct isp1760_host_data { + struct isp1760_hcd *priv; + struct usb_hcd hcd; + enum usb_device_speed host_speed; + struct usb_host_endpoint hep; + struct urb urb; +}; + +extern struct dm_usb_ops isp1760_usb_ops; + +#endif diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c index 18d9bc805f8..fc7af7484e4 100644 --- a/drivers/usb/musb-new/musb_core.c +++ b/drivers/usb/musb-new/musb_core.c @@ -89,9 +89,9 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb/musb.h> +#include <linux/usb/usb_urb_compat.h> #include <asm/io.h> #include "linux-compat.h" -#include "usb-compat.h" #endif #include "musb_core.h" diff --git a/drivers/usb/musb-new/musb_host.c b/drivers/usb/musb-new/musb_host.c index acb2d40f3b5..e5905d90d66 100644 --- a/drivers/usb/musb-new/musb_host.c +++ b/drivers/usb/musb-new/musb_host.c @@ -26,8 +26,8 @@ #include <dm/device_compat.h> #include <usb.h> #include <linux/bug.h> +#include <linux/usb/usb_urb_compat.h> #include "linux-compat.h" -#include "usb-compat.h" #endif #include "musb_core.h" diff --git a/drivers/usb/musb-new/musb_host.h b/drivers/usb/musb-new/musb_host.h index afc8fa35a73..5a604bdb0cf 100644 --- a/drivers/usb/musb-new/musb_host.h +++ b/drivers/usb/musb-new/musb_host.h @@ -10,7 +10,7 @@ #ifndef _MUSB_HOST_H #define _MUSB_HOST_H #ifdef __UBOOT__ -#include "usb-compat.h" +#include <linux/usb/usb_urb_compat.h> #endif static inline struct usb_hcd *musb_to_hcd(struct musb *musb) diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c index 61ff68def2f..d186facc7e0 100644 --- a/drivers/usb/musb-new/musb_uboot.c +++ b/drivers/usb/musb-new/musb_uboot.c @@ -8,10 +8,10 @@ #include <linux/errno.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/usb/usb_urb_compat.h> #include <usb.h> #include "linux-compat.h" -#include "usb-compat.h" #include "musb_core.h" #include "musb_host.h" #include "musb_gadget.h" @@ -453,39 +453,3 @@ struct musb *musb_register(struct musb_hdrc_platform_data *plat, void *bdata, return *musbp; } - -#if CONFIG_IS_ENABLED(DM_USB) -struct usb_device *usb_dev_get_parent(struct usb_device *udev) -{ - struct udevice *parent = udev->dev->parent; - - /* - * When called from usb-uclass.c: usb_scan_device() udev->dev points - * to the parent udevice, not the actual udevice belonging to the - * udev as the device is not instantiated yet. - * - * If dev is an usb-bus, then we are called from usb_scan_device() for - * an usb-device plugged directly into the root port, return NULL. - */ - if (device_get_uclass_id(udev->dev) == UCLASS_USB) - return NULL; - - /* - * If these 2 are not the same we are being called from - * usb_scan_device() and udev itself is the parent. - */ - if (dev_get_parent_priv(udev->dev) != udev) - return udev; - - /* We are being called normally, use the parent pointer */ - if (device_get_uclass_id(parent) == UCLASS_USB_HUB) - return dev_get_parent_priv(parent); - - return NULL; -} -#else -struct usb_device *usb_dev_get_parent(struct usb_device *udev) -{ - return udev->parent; -} -#endif diff --git a/drivers/usb/musb-new/musb_uboot.h b/drivers/usb/musb-new/musb_uboot.h index 18282efccc9..6b162f03b19 100644 --- a/drivers/usb/musb-new/musb_uboot.h +++ b/drivers/usb/musb-new/musb_uboot.h @@ -8,8 +8,8 @@ #define __MUSB_UBOOT_H__ #include <usb.h> +#include <linux/usb/usb_urb_compat.h> #include "linux-compat.h" -#include "usb-compat.h" #include "musb_core.h" struct musb_host_data { diff --git a/drivers/usb/musb-new/usb-compat.h b/drivers/usb/musb-new/usb-compat.h deleted file mode 100644 index df68c9220a7..00000000000 --- a/drivers/usb/musb-new/usb-compat.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef __USB_COMPAT_H__ -#define __USB_COMPAT_H__ - -#include "usb.h" - -struct udevice; - -struct usb_hcd { - void *hcd_priv; -}; - -struct usb_host_endpoint { - struct usb_endpoint_descriptor desc; - struct list_head urb_list; - void *hcpriv; -}; - -/* - * urb->transfer_flags: - * - * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb(). - */ -#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ -#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ - -struct urb; - -typedef void (*usb_complete_t)(struct urb *); - -struct urb { - void *hcpriv; /* private data for host controller */ - struct list_head urb_list; /* list head for use by the urb's - * current owner */ - struct usb_device *dev; /* (in) pointer to associated device */ - struct usb_host_endpoint *ep; /* (internal) pointer to endpoint */ - unsigned int pipe; /* (in) pipe information */ - int status; /* (return) non-ISO status */ - unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/ - void *transfer_buffer; /* (in) associated data buffer */ - dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */ - u32 transfer_buffer_length; /* (in) data buffer length */ - u32 actual_length; /* (return) actual transfer length */ - unsigned char *setup_packet; /* (in) setup packet (control only) */ - int start_frame; /* (modify) start frame (ISO) */ - usb_complete_t complete; /* (in) completion routine */ -}; - -#define usb_hcd_link_urb_to_ep(hcd, urb) ({ \ - int ret = 0; \ - list_add_tail(&urb->urb_list, &urb->ep->urb_list); \ - ret; }) -#define usb_hcd_unlink_urb_from_ep(hcd, urb) list_del_init(&urb->urb_list) -#define usb_hcd_check_unlink_urb(hdc, urb, status) 0 - -static inline void usb_hcd_giveback_urb(struct usb_hcd *hcd, - struct urb *urb, - int status) -{ - urb->status = status; - if (urb->complete) - urb->complete(urb); -} - -static inline int usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, - struct urb *urb) -{ - /* TODO: add cache invalidation here */ - return 0; -} - -/** - * usb_dev_get_parent() - Get the parent of a USB device - * - * @udev: USB struct containing information about the device - * Return: associated device for which udev == dev_get_parent_priv(dev) - */ -struct usb_device *usb_dev_get_parent(struct usb_device *udev); - -#endif /* __USB_COMPAT_H__ */ |