diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/pci/Makefile | 3 | ||||
| -rw-r--r-- | drivers/pci/pci_sh4.c | 76 | ||||
| -rw-r--r-- | drivers/pci/pci_sh7751.c | 199 | ||||
| -rw-r--r-- | drivers/pci/pci_sh7780.c | 107 | ||||
| -rw-r--r-- | drivers/serial/serial_sh.c | 70 |
5 files changed, 423 insertions, 32 deletions
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index fe458394661..ad1b7ddb431 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -31,6 +31,9 @@ COBJS-y += pci_auto.o COBJS-y += pci_indirect.o COBJS-y += tsi108_pci.o COBJS-y += w83c553f.o +COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o +COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o +COBJS-$(CONFIG_SH7780_PCI) +=pci_sh7780.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/pci/pci_sh4.c b/drivers/pci/pci_sh4.c new file mode 100644 index 00000000000..1290c0a799e --- /dev/null +++ b/drivers/pci/pci_sh4.c @@ -0,0 +1,76 @@ +/* + * SH4 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * u-boot/cpu/sh4/pci-sh4.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <pci.h> + +int pci_sh4_init(struct pci_controller *hose) +{ + hose->first_busno = 0; + hose->region_count = 0; + hose->last_busno = 0xff; + + /* PCI memory space */ + pci_set_region(hose->regions + 0, + CONFIG_PCI_MEM_BUS, + CONFIG_PCI_MEM_PHYS, + CONFIG_PCI_MEM_SIZE, + PCI_REGION_MEM); + hose->region_count++; + + /* PCI IO space */ + pci_set_region(hose->regions + 1, + CONFIG_PCI_IO_BUS, + CONFIG_PCI_IO_PHYS, + CONFIG_PCI_IO_SIZE, + PCI_REGION_IO); + hose->region_count++; + + udelay(1000); + + pci_set_ops(hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + pci_sh4_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + pci_sh4_write_config_dword); + + pci_register_hose(hose); + + udelay(1000); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + hose->last_busno = pci_hose_scan(hose); + return 0; +} diff --git a/drivers/pci/pci_sh7751.c b/drivers/pci/pci_sh7751.c new file mode 100644 index 00000000000..a058e1d37fc --- /dev/null +++ b/drivers/pci/pci_sh7751.c @@ -0,0 +1,199 @@ +/* + * SH7751 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <pci.h> + +/* Register addresses and such */ +#define SH7751_BCR1 (vu_long *)0xFF800000 +#define SH7751_BCR2 (vu_short*)0xFF800004 +#define SH7751_WCR1 (vu_long *)0xFF800008 +#define SH7751_WCR2 (vu_long *)0xFF80000C +#define SH7751_WCR3 (vu_long *)0xFF800010 +#define SH7751_MCR (vu_long *)0xFF800014 +#define SH7751_BCR3 (vu_short*)0xFF800050 +#define SH7751_PCICONF0 (vu_long *)0xFE200000 +#define SH7751_PCICONF1 (vu_long *)0xFE200004 +#define SH7751_PCICONF2 (vu_long *)0xFE200008 +#define SH7751_PCICONF3 (vu_long *)0xFE20000C +#define SH7751_PCICONF4 (vu_long *)0xFE200010 +#define SH7751_PCICONF5 (vu_long *)0xFE200014 +#define SH7751_PCICONF6 (vu_long *)0xFE200018 +#define SH7751_PCICR (vu_long *)0xFE200100 +#define SH7751_PCILSR0 (vu_long *)0xFE200104 +#define SH7751_PCILSR1 (vu_long *)0xFE200108 +#define SH7751_PCILAR0 (vu_long *)0xFE20010C +#define SH7751_PCILAR1 (vu_long *)0xFE200110 +#define SH7751_PCIMBR (vu_long *)0xFE2001C4 +#define SH7751_PCIIOBR (vu_long *)0xFE2001C8 +#define SH7751_PCIPINT (vu_long *)0xFE2001CC +#define SH7751_PCIPINTM (vu_long *)0xFE2001D0 +#define SH7751_PCICLKR (vu_long *)0xFE2001D4 +#define SH7751_PCIBCR1 (vu_long *)0xFE2001E0 +#define SH7751_PCIBCR2 (vu_long *)0xFE2001E4 +#define SH7751_PCIWCR1 (vu_long *)0xFE2001E8 +#define SH7751_PCIWCR2 (vu_long *)0xFE2001EC +#define SH7751_PCIWCR3 (vu_long *)0xFE2001F0 +#define SH7751_PCIMCR (vu_long *)0xFE2001F4 +#define SH7751_PCIBCR3 (vu_long *)0xFE2001F8 + +#define BCR1_BREQEN 0x00080000 +#define PCI_SH7751_ID 0x35051054 +#define PCI_SH7751R_ID 0x350E1054 +#define SH7751_PCICONF1_WCC 0x00000080 +#define SH7751_PCICONF1_PER 0x00000040 +#define SH7751_PCICONF1_BUM 0x00000004 +#define SH7751_PCICONF1_MES 0x00000002 +#define SH7751_PCICONF1_CMDS 0x000000C6 +#define SH7751_PCI_HOST_BRIDGE 0x6 +#define SH7751_PCICR_PREFIX 0xa5000000 +#define SH7751_PCICR_PRST 0x00000002 +#define SH7751_PCICR_CFIN 0x00000001 +#define SH7751_PCIPINT_D3 0x00000002 +#define SH7751_PCIPINT_D0 0x00000001 +#define SH7751_PCICLKR_PREFIX 0xa5000000 + +#define SH7751_PCI_MEM_BASE 0xFD000000 +#define SH7751_PCI_MEM_SIZE 0x01000000 +#define SH7751_PCI_IO_BASE 0xFE240000 +#define SH7751_PCI_IO_SIZE 0x00040000 + +#define SH7751_CS3_BASE_ADDR 0x0C000000 +#define SH7751_P2CS3_BASE_ADDR 0xAC000000 + +#define SH7751_PCIPAR (vu_long *)0xFE2001C0 +#define SH7751_PCIPDR (vu_long *)0xFE200220 + +#define p4_in(addr) *(addr) +#define p4_out(data,addr) *(addr) = (data) + +/* Double word */ +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); + *value = p4_in(SH7751_PCIPDR); + + return 0; +} + +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); + p4_out(value, SH7751_PCIPDR); + + return 0; +} + +int pci_sh7751_init(struct pci_controller *hose) +{ + /* Double-check that we're a 7751 or 7751R chip */ + if (p4_in(SH7751_PCICONF0) != PCI_SH7751_ID + && p4_in(SH7751_PCICONF0) != PCI_SH7751R_ID) { + printf("PCI: Unknown PCI host bridge.\n"); + return 1; + } + printf("PCI: SH7751 PCI host bridge found.\n"); + + /* Double-check some BSC config settings */ + /* (Area 3 non-MPX 32-bit, PCI bus pins) */ + if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) { + printf("SH7751_BCR1 0x%08X\n", p4_in(SH7751_BCR1)); + return 2; + } + if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) { + printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2)); + return 3; + } + if (p4_in(SH7751_BCR2) & 0x01) { + printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2)); + return 4; + } + + /* Force BREQEN in BCR1 to allow PCIC access */ + p4_out((p4_in(SH7751_BCR1) | BCR1_BREQEN), SH7751_BCR1); + + /* Toggle PCI reset pin */ + p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_PRST), SH7751_PCICR); + udelay(32); + p4_out(SH7751_PCICR_PREFIX, SH7751_PCICR); + + /* Set cmd bits: WCC, PER, BUM, MES */ + /* (Addr/Data stepping, Parity enabled, Bus Master, Memory enabled) */ + p4_out(0xfb900047, SH7751_PCICONF1); /* K.Kino */ + + /* Define this host as the host bridge */ + p4_out((SH7751_PCI_HOST_BRIDGE << 24), SH7751_PCICONF2); + + /* Force PCI clock(s) on */ + p4_out(0, SH7751_PCICLKR); + p4_out(0x03, SH7751_PCICLKR); + + /* Clear powerdown IRQs, also mask them (unused) */ + p4_out((SH7751_PCIPINT_D0 | SH7751_PCIPINT_D3), SH7751_PCIPINT); + p4_out(0, SH7751_PCIPINTM); + + p4_out(0xab000001, SH7751_PCICONF4); + + /* Set up target memory mappings (for external DMA access) */ + /* Map both P0 and P2 range to Area 3 RAM for ease of use */ + p4_out((64 - 1) << 20, SH7751_PCILSR0); + p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCILAR0); + p4_out(0, SH7751_PCILSR1); + p4_out(0, SH7751_PCILAR1); + p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCICONF5); + p4_out(0xd0000000, SH7751_PCICONF6); + + /* Map memory window to same address on PCI bus */ + p4_out(SH7751_PCI_MEM_BASE, SH7751_PCIMBR); + + /* Map IO window to same address on PCI bus */ + p4_out(0x2000 & 0xfffc0000, SH7751_PCIIOBR); + + /* set BREQEN */ + p4_out(inl(SH7751_BCR1) | 0x00080000, SH7751_BCR1); + + /* Copy BSC registers into PCI BSC */ + p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1); + p4_out(inl(SH7751_BCR2), SH7751_PCIBCR2); + p4_out(inl(SH7751_BCR3), SH7751_PCIBCR3); + p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1); + p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2); + p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3); + p4_out(inl(SH7751_MCR), SH7751_PCIMCR); + + /* Finally, set central function init complete */ + p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN), SH7751_PCICR); + + pci_sh4_init(hose); + + return 0; +} diff --git a/drivers/pci/pci_sh7780.c b/drivers/pci/pci_sh7780.c new file mode 100644 index 00000000000..d63d67d2dcd --- /dev/null +++ b/drivers/pci/pci_sh7780.c @@ -0,0 +1,107 @@ +/* + * SH7780 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <pci.h> + +#define SH7780_VENDOR_ID 0x1912 +#define SH7780_DEVICE_ID 0x0002 +#define SH7780_PCICR_PREFIX 0xA5000000 +#define SH7780_PCICR_PFCS 0x00000800 +#define SH7780_PCICR_FTO 0x00000400 +#define SH7780_PCICR_PFE 0x00000200 +#define SH7780_PCICR_TBS 0x00000100 +#define SH7780_PCICR_ARBM 0x00000040 +#define SH7780_PCICR_IOCS 0x00000004 +#define SH7780_PCICR_PRST 0x00000002 +#define SH7780_PCICR_CFIN 0x00000001 + +#define p4_in(addr) *((vu_long *)addr) +#define p4_out(data,addr) *(vu_long *)(addr) = (data) +#define p4_inw(addr) *((vu_short *)addr) +#define p4_outw(data,addr) *(vu_short *)(addr) = (data) + +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 *value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR); + *value = p4_in(SH7780_PCIPDR); + + return 0; +} + +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR); + p4_out(value, SH7780_PCIPDR); + return 0; +} + +int pci_sh7780_init(struct pci_controller *hose) +{ + p4_out(0x01, SH7780_PCIECR); + + if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID + && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID){ + printf("PCI: Unknown PCI host bridge.\n"); + return; + } + printf("PCI: SH7780 PCI host bridge found.\n"); + + /* Toggle PCI reset pin */ + p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_PRST), SH7780_PCICR); + udelay(100000); + p4_out(SH7780_PCICR_PREFIX, SH7780_PCICR); + p4_outw(0x0047, SH7780_PCICMD); + + p4_out(0x07F00001, SH7780_PCILSR0); + p4_out(0x08000000, SH7780_PCILAR0); + p4_out(0x00000000, SH7780_PCILSR1); + p4_out(0, SH7780_PCILAR1); + p4_out(0x08000000, SH7780_PCIMBAR0); + p4_out(0x00000000, SH7780_PCIMBAR1); + + p4_out(0xFD000000, SH7780_PCIMBR0); + p4_out(0x00FC0000, SH7780_PCIMBMR0); + + /* if use Operand Cache then enable PCICSCR Soonp bits. */ + p4_out(0x08000000, SH7780_PCICSAR0); + p4_out(0x0000001B, SH7780_PCICSCR0); /* Snoop bit :On */ + + p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | SH7780_PCICR_ARBM + | SH7780_PCICR_FTO | SH7780_PCICR_PFCS | SH7780_PCICR_PFE), + SH7780_PCICR); + + pci_sh4_init(hose); + return 0; +} diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 70fd23ff0af..522f96d5db6 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -37,39 +37,46 @@ #define SCFCR (vu_short *)(SCIF_BASE + 0x18) #define SCFDR (vu_short *)(SCIF_BASE + 0x1C) #ifdef CONFIG_CPU_SH7720 /* SH7720 specific */ -#define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */ -#define SCFTDR (vu_char *)(SCIF_BASE + 0x20) -#define SCFRDR (vu_char *)(SCIF_BASE + 0x24) +# define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */ +# define SCFTDR (vu_char *)(SCIF_BASE + 0x20) +# define SCFRDR (vu_char *)(SCIF_BASE + 0x24) #else -#define SCFTDR (vu_char *)(SCIF_BASE + 0xC) -#define SCFSR (vu_short *)(SCIF_BASE + 0x10) -#define SCFRDR (vu_char *)(SCIF_BASE + 0x14) +# define SCFTDR (vu_char *)(SCIF_BASE + 0xC) +# define SCFSR (vu_short *)(SCIF_BASE + 0x10) +# define SCFRDR (vu_char *)(SCIF_BASE + 0x14) #endif -#if defined(CONFIG_SH4A) -#define SCRFDR (vu_short *)(SCIF_BASE + 0x20) -#define SCSPTR (vu_short *)(SCIF_BASE + 0x24) -#define SCLSR (vu_short *)(SCIF_BASE + 0x28) -#define SCRER (vu_short *)(SCIF_BASE + 0x2C) -#define LSR_ORER 1 -#elif defined (CONFIG_SH4) -#define SCSPTR (vu_short *)(SCIF_BASE + 0x20) -#define SCLSR (vu_short *)(SCIF_BASE + 0x24) -#define LSR_ORER 1 -#elif defined (CONFIG_SH3) -#ifdef CONFIG_CPU_SH7720 /* SH7720 specific */ -#define SCLSR (vu_short *)(SCIF_BASE + 0x24) -#define LSR_ORER 0x0200 -#else -#define SCLSR SCFSR /* SCSSR */ -#define LSR_ORER 1 -#endif +#if defined(CONFIG_CPU_SH7780) || \ + defined(CONFIG_CPU_SH7785) +# define SCRFDR (vu_short *)(SCIF_BASE + 0x20) +# define SCSPTR (vu_short *)(SCIF_BASE + 0x24) +# define SCLSR (vu_short *)(SCIF_BASE + 0x28) +# define SCRER (vu_short *)(SCIF_BASE + 0x2C) +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0xFF +#elif defined(CONFIG_CPU_SH7750) || \ + defined(CONFIG_CPU_SH7751) || \ + defined(CONFIG_CPU_SH7722) +# define SCSPTR (vu_short *)(SCIF_BASE + 0x20) +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0x1F +#elif defined(CONFIG_CPU_SH7720) +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define LSR_ORER 0x0200 +# define FIFOLEVEL_MASK 0x1F +#elif defined(CONFIG_CPU_SH7710) + defined(CONFIG_CPU_SH7712) +# define SCLSR SCFSR /* SCSSR */ +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0x1F #endif +/* SCBRR register value setting */ #if defined(CONFIG_CPU_SH7720) -#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #else /* Generic SuperH */ -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif #define SCR_RE (1 << 4) @@ -105,14 +112,13 @@ int serial_init (void) return 0; } -static int serial_tx_fifo_level (void) -{ - return (*SCFDR >> 8) & 0x1F; -} - static int serial_rx_fifo_level (void) { - return (*SCFDR >> 0) & 0x1F; +#if defined(CONFIG_SH4A) + return (*SCRFDR >> 0) & FIFOLEVEL_MASK; +#else + return (*SCFDR >> 0) & FIFOLEVEL_MASK; +#endif } void serial_raw_putc (const char c) |