diff options
Diffstat (limited to 'dts/upstream/Bindings/input/atmel,captouch.txt')
-rw-r--r-- | dts/upstream/Bindings/input/atmel,captouch.txt | 36 |
1 files changed, 0 insertions, 36 deletions
diff --git a/dts/upstream/Bindings/input/atmel,captouch.txt b/dts/upstream/Bindings/input/atmel,captouch.txt deleted file mode 100644 index fe9ee5c53bc..00000000000 --- a/dts/upstream/Bindings/input/atmel,captouch.txt +++ /dev/null @@ -1,36 +0,0 @@ -Device tree bindings for Atmel capacitive touch device, typically -an Atmel touch sensor connected to AtmegaXX MCU running firmware -based on Qtouch library. - -The node for this device must be a child of a I2C controller node, as the -device communicates via I2C. - -Required properties: - - compatible: Must be "atmel,captouch". - reg: The I2C slave address of the device. - interrupts: Property describing the interrupt line the device - is connected to. The device only has one interrupt - source. - linux,keycodes: Specifies an array of numeric keycode values to - be used for reporting button presses. The array can - contain up to 8 entries. - -Optional properties: - - autorepeat: Enables the Linux input system's autorepeat - feature on the input device. - -Example: - - atmel-captouch@51 { - compatible = "atmel,captouch"; - reg = <0x51>; - interrupt-parent = <&tlmm>; - interrupts = <67 IRQ_TYPE_EDGE_FALLING>; - linux,keycodes = <BTN_0>, <BTN_1>, - <BTN_2>, <BTN_3>, - <BTN_4>, <BTN_5>, - <BTN_6>, <BTN_7>; - autorepeat; - }; |