diff options
Diffstat (limited to 'dts/upstream/Bindings/iommu/arm,smmu.yaml')
-rw-r--r-- | dts/upstream/Bindings/iommu/arm,smmu.yaml | 594 |
1 files changed, 594 insertions, 0 deletions
diff --git a/dts/upstream/Bindings/iommu/arm,smmu.yaml b/dts/upstream/Bindings/iommu/arm,smmu.yaml new file mode 100644 index 00000000000..aa9e1c0895a --- /dev/null +++ b/dts/upstream/Bindings/iommu/arm,smmu.yaml @@ -0,0 +1,594 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/arm,smmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM System MMU Architecture Implementation + +maintainers: + - Will Deacon <will@kernel.org> + - Robin Murphy <Robin.Murphy@arm.com> + +description: |+ + ARM SoCs may contain an implementation of the ARM System Memory + Management Unit Architecture, which can be used to provide 1 or 2 stages + of address translation to bus masters external to the CPU. + + The SMMU may also raise interrupts in response to various fault + conditions. + +properties: + $nodename: + pattern: "^iommu@[0-9a-f]*" + compatible: + oneOf: + - description: Qcom SoCs implementing "arm,smmu-v2" + items: + - enum: + - qcom,msm8996-smmu-v2 + - qcom,msm8998-smmu-v2 + - qcom,sdm630-smmu-v2 + - qcom,sm6375-smmu-v2 + - const: qcom,smmu-v2 + + - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500" + items: + - enum: + - qcom,qcm2290-smmu-500 + - qcom,qdu1000-smmu-500 + - qcom,sa8775p-smmu-500 + - qcom,sc7180-smmu-500 + - qcom,sc7280-smmu-500 + - qcom,sc8180x-smmu-500 + - qcom,sc8280xp-smmu-500 + - qcom,sdm670-smmu-500 + - qcom,sdm845-smmu-500 + - qcom,sdx55-smmu-500 + - qcom,sdx65-smmu-500 + - qcom,sdx75-smmu-500 + - qcom,sm6115-smmu-500 + - qcom,sm6125-smmu-500 + - qcom,sm6350-smmu-500 + - qcom,sm6375-smmu-500 + - qcom,sm8150-smmu-500 + - qcom,sm8250-smmu-500 + - qcom,sm8350-smmu-500 + - qcom,sm8450-smmu-500 + - qcom,sm8550-smmu-500 + - const: qcom,smmu-500 + - const: arm,mmu-500 + + - description: Qcom SoCs implementing "arm,mmu-500" (legacy binding) + deprecated: true + items: + # Do not add additional SoC to this list. Instead use two previous lists. + - enum: + - qcom,qcm2290-smmu-500 + - qcom,sc7180-smmu-500 + - qcom,sc7280-smmu-500 + - qcom,sc8180x-smmu-500 + - qcom,sc8280xp-smmu-500 + - qcom,sdm845-smmu-500 + - qcom,sm6115-smmu-500 + - qcom,sm6350-smmu-500 + - qcom,sm6375-smmu-500 + - qcom,sm8150-smmu-500 + - qcom,sm8250-smmu-500 + - qcom,sm8350-smmu-500 + - qcom,sm8450-smmu-500 + - const: arm,mmu-500 + - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500" + items: + - enum: + - qcom,sa8775p-smmu-500 + - qcom,sc7280-smmu-500 + - qcom,sc8280xp-smmu-500 + - qcom,sm6115-smmu-500 + - qcom,sm6125-smmu-500 + - qcom,sm8150-smmu-500 + - qcom,sm8250-smmu-500 + - qcom,sm8350-smmu-500 + - const: qcom,adreno-smmu + - const: qcom,smmu-500 + - const: arm,mmu-500 + - description: Qcom Adreno GPUs implementing "arm,mmu-500" (legacy binding) + deprecated: true + items: + # Do not add additional SoC to this list. Instead use previous list. + - enum: + - qcom,sc7280-smmu-500 + - qcom,sm8150-smmu-500 + - qcom,sm8250-smmu-500 + - const: qcom,adreno-smmu + - const: arm,mmu-500 + - description: Qcom Adreno GPUs implementing "arm,smmu-v2" + items: + - enum: + - qcom,msm8996-smmu-v2 + - qcom,sc7180-smmu-v2 + - qcom,sdm630-smmu-v2 + - qcom,sdm845-smmu-v2 + - qcom,sm6350-smmu-v2 + - qcom,sm7150-smmu-v2 + - const: qcom,adreno-smmu + - const: qcom,smmu-v2 + - description: Qcom Adreno GPUs on Google Cheza platform + items: + - const: qcom,sdm845-smmu-v2 + - const: qcom,smmu-v2 + - description: Marvell SoCs implementing "arm,mmu-500" + items: + - const: marvell,ap806-smmu-500 + - const: arm,mmu-500 + - description: NVIDIA SoCs that require memory controller interaction + and may program multiple ARM MMU-500s identically with the memory + controller interleaving translations between multiple instances + for improved performance. + items: + - enum: + - nvidia,tegra186-smmu + - nvidia,tegra194-smmu + - nvidia,tegra234-smmu + - const: nvidia,smmu-500 + - items: + - const: arm,mmu-500 + - const: arm,smmu-v2 + - items: + - enum: + - arm,mmu-400 + - arm,mmu-401 + - const: arm,smmu-v1 + - enum: + - arm,smmu-v1 + - arm,smmu-v2 + - arm,mmu-400 + - arm,mmu-401 + - arm,mmu-500 + - cavium,smmu-v2 + + reg: + minItems: 1 + maxItems: 2 + + '#global-interrupts': + description: The number of global interrupts exposed by the device. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf counters + + '#iommu-cells': + enum: [ 1, 2 ] + description: | + See Documentation/devicetree/bindings/iommu/iommu.txt for details. With a + value of 1, each IOMMU specifier represents a distinct stream ID emitted + by that device into the relevant SMMU. + + SMMUs with stream matching support and complex masters may use a value of + 2, where the second cell of the IOMMU specifier represents an SMR mask to + combine with the ID in the first cell. Care must be taken to ensure the + set of matched IDs does not result in conflicts. + + interrupts: + minItems: 1 + maxItems: 388 # 260 plus 128 contexts + description: | + Interrupt list, with the first #global-interrupts entries corresponding to + the global interrupts and any following entries corresponding to context + interrupts, specified in order of their indexing by the SMMU. + + For SMMUv2 implementations, there must be exactly one interrupt per + context bank. In the case of a single, combined interrupt, it must be + listed multiple times. + + dma-coherent: + description: | + Present if page table walks made by the SMMU are cache coherent with the + CPU. + + NOTE: this only applies to the SMMU itself, not masters connected + upstream of the SMMU. + + calxeda,smmu-secure-config-access: + type: boolean + description: + Enable proper handling of buggy implementations that always use secure + access to SMMU configuration registers. In this case non-secure aliases of + secure registers have to be used during SMMU configuration. + + stream-match-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + For SMMUs supporting stream matching and using #iommu-cells = <1>, + specifies a mask of bits to ignore when matching stream IDs (e.g. this may + be programmed into the SMRn.MASK field of every stream match register + used). For cases where it is desirable to ignore some portion of every + Stream ID (e.g. for certain MMU-500 configurations given globally unique + input IDs). This property is not valid for SMMUs using stream indexing, or + using stream matching with #iommu-cells = <2>, and may be ignored if + present in such cases. + + clock-names: + minItems: 1 + maxItems: 7 + + clocks: + minItems: 1 + maxItems: 7 + + power-domains: + minItems: 1 + maxItems: 3 + + nvidia,memory-controller: + description: | + A phandle to the memory controller on NVIDIA Tegra186 and later SoCs. + The memory controller needs to be programmed with a mapping of memory + client IDs to ARM SMMU stream IDs. + + If this property is absent, the mapping programmed by early firmware + will be used and it is not guaranteed that IOMMU translations will be + enabled for any given device. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - '#global-interrupts' + - '#iommu-cells' + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra186-smmu + - nvidia,tegra194-smmu + - nvidia,tegra234-smmu + then: + properties: + reg: + minItems: 1 + maxItems: 2 + + # The reference to the memory controller is required to ensure that the + # memory client to stream ID mapping can be done synchronously with the + # IOMMU attachment. + required: + - nvidia,memory-controller + else: + properties: + reg: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-smmu-v2 + - qcom,sdm630-smmu-v2 + then: + anyOf: + - properties: + clock-names: + items: + - const: bus + clocks: + items: + - description: bus clock required for downstream bus access and for + the smmu ptw + - properties: + clock-names: + items: + - const: iface + - const: mem + - const: mem_iface + clocks: + items: + - description: interface clock required to access smmu's registers + through the TCU's programming interface. + - description: bus clock required for memory access + - description: bus clock required for GPU memory access + - properties: + clock-names: + items: + - const: iface-mm + - const: iface-smmu + - const: bus-smmu + clocks: + items: + - description: interface clock required to access mnoc's registers + through the TCU's programming interface. + - description: interface clock required to access smmu's registers + through the TCU's programming interface. + - description: bus clock required for the smmu ptw + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6375-smmu-v2 + then: + anyOf: + - properties: + clock-names: + items: + - const: bus + clocks: + items: + - description: bus clock required for downstream bus access and for + the smmu ptw + - properties: + clock-names: + items: + - const: iface + - const: mem + - const: mem_iface + clocks: + items: + - description: interface clock required to access smmu's registers + through the TCU's programming interface. + - description: bus clock required for memory access + - description: bus clock required for GPU memory access + - properties: + clock-names: + items: + - const: iface-mm + - const: iface-smmu + - const: bus-mm + - const: bus-smmu + clocks: + items: + - description: interface clock required to access mnoc's registers + through the TCU's programming interface. + - description: interface clock required to access smmu's registers + through the TCU's programming interface. + - description: bus clock required for downstream bus access + - description: bus clock required for the smmu ptw + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-smmu-v2 + - qcom,sc7180-smmu-v2 + - qcom,sdm845-smmu-v2 + then: + properties: + clock-names: + items: + - const: bus + - const: iface + + clocks: + items: + - description: bus clock required for downstream bus access and for + the smmu ptw + - description: interface clock required to access smmu's registers + through the TCU's programming interface. + + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-smmu-500 + - qcom,sc7280-smmu-500 + - qcom,sc8280xp-smmu-500 + then: + properties: + clock-names: + items: + - const: gcc_gpu_memnoc_gfx_clk + - const: gcc_gpu_snoc_dvm_gfx_clk + - const: gpu_cc_ahb_clk + - const: gpu_cc_hlos1_vote_gpu_smmu_clk + - const: gpu_cc_cx_gmu_clk + - const: gpu_cc_hub_cx_int_clk + - const: gpu_cc_hub_aon_clk + + clocks: + items: + - description: GPU memnoc_gfx clock + - description: GPU snoc_dvm_gfx clock + - description: GPU ahb clock + - description: GPU hlos1_vote_GPU smmu clock + - description: GPU cx_gmu clock + - description: GPU hub_cx_int clock + - description: GPU hub_aon clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6350-smmu-v2 + - qcom,sm7150-smmu-v2 + - qcom,sm8150-smmu-500 + - qcom,sm8250-smmu-500 + then: + properties: + clock-names: + items: + - const: ahb + - const: bus + - const: iface + + clocks: + items: + - description: bus clock required for AHB bus access + - description: bus clock required for downstream bus access and for + the smmu ptw + - description: interface clock required to access smmu's registers + through the TCU's programming interface. + + - if: + properties: + compatible: + items: + - enum: + - qcom,sm6115-smmu-500 + - qcom,sm6125-smmu-500 + - const: qcom,adreno-smmu + - const: qcom,smmu-500 + - const: arm,mmu-500 + then: + properties: + clock-names: + items: + - const: mem + - const: hlos + - const: iface + + clocks: + items: + - description: GPU memory bus clock + - description: Voter clock required for HLOS SMMU access + - description: Interface clock required for register access + + # Disallow clocks for all other platforms with specific compatibles + - if: + properties: + compatible: + contains: + enum: + - cavium,smmu-v2 + - marvell,ap806-smmu-500 + - nvidia,smmu-500 + - qcom,qcm2290-smmu-500 + - qcom,qdu1000-smmu-500 + - qcom,sc7180-smmu-500 + - qcom,sc8180x-smmu-500 + - qcom,sdm670-smmu-500 + - qcom,sdm845-smmu-500 + - qcom,sdx55-smmu-500 + - qcom,sdx65-smmu-500 + - qcom,sm6350-smmu-500 + - qcom,sm6375-smmu-500 + - qcom,sm8350-smmu-500 + - qcom,sm8450-smmu-500 + - qcom,sm8550-smmu-500 + then: + properties: + clock-names: false + clocks: false + + - if: + properties: + compatible: + contains: + const: qcom,sm6375-smmu-500 + then: + properties: + power-domains: + items: + - description: SNoC MMU TBU RT GDSC + - description: SNoC MMU TBU NRT GDSC + - description: SNoC TURING MMU TBU0 GDSC + + required: + - power-domains + else: + properties: + power-domains: + maxItems: 1 + +examples: + - |+ + /* SMMU with stream matching or stream indexing */ + smmu1: iommu@ba5e0000 { + compatible = "arm,smmu-v1"; + reg = <0xba5e0000 0x10000>; + #global-interrupts = <2>; + interrupts = <0 32 4>, + <0 33 4>, + <0 34 4>, /* This is the first context interrupt */ + <0 35 4>, + <0 36 4>, + <0 37 4>; + #iommu-cells = <1>; + }; + + /* device with two stream IDs, 0 and 7 */ + master1 { + iommus = <&smmu1 0>, + <&smmu1 7>; + }; + + + /* SMMU with stream matching */ + smmu2: iommu@ba5f0000 { + compatible = "arm,smmu-v1"; + reg = <0xba5f0000 0x10000>; + #global-interrupts = <2>; + interrupts = <0 38 4>, + <0 39 4>, + <0 40 4>, /* This is the first context interrupt */ + <0 41 4>, + <0 42 4>, + <0 43 4>; + #iommu-cells = <2>; + }; + + /* device with stream IDs 0 and 7 */ + master2 { + iommus = <&smmu2 0 0>, + <&smmu2 7 0>; + }; + + /* device with stream IDs 1, 17, 33 and 49 */ + master3 { + iommus = <&smmu2 1 0x30>; + }; + + + /* ARM MMU-500 with 10-bit stream ID input configuration */ + smmu3: iommu@ba600000 { + compatible = "arm,mmu-500", "arm,smmu-v2"; + reg = <0xba600000 0x10000>; + #global-interrupts = <2>; + interrupts = <0 44 4>, + <0 45 4>, + <0 46 4>, /* This is the first context interrupt */ + <0 47 4>, + <0 48 4>, + <0 49 4>; + #iommu-cells = <1>; + /* always ignore appended 5-bit TBU number */ + stream-match-mask = <0x7c00>; + }; + + bus { + /* bus whose child devices emit one unique 10-bit stream + ID each, but may master through multiple SMMU TBUs */ + iommu-map = <0 &smmu3 0 0x400>; + + + }; + + - |+ + /* Qcom's arm,smmu-v2 implementation */ + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + smmu4: iommu@d00000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0xd00000 0x10000>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + power-domains = <&mmcc 0>; + + clocks = <&mmcc 123>, + <&mmcc 124>; + clock-names = "bus", "iface"; + }; |