aboutsummaryrefslogtreecommitdiff
path: root/dts/upstream/Bindings/mtd/partitions/brcm,trx.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/upstream/Bindings/mtd/partitions/brcm,trx.txt')
-rw-r--r--dts/upstream/Bindings/mtd/partitions/brcm,trx.txt42
1 files changed, 42 insertions, 0 deletions
diff --git a/dts/upstream/Bindings/mtd/partitions/brcm,trx.txt b/dts/upstream/Bindings/mtd/partitions/brcm,trx.txt
new file mode 100644
index 00000000000..c2175d3c82e
--- /dev/null
+++ b/dts/upstream/Bindings/mtd/partitions/brcm,trx.txt
@@ -0,0 +1,42 @@
+Broadcom TRX Container Partition
+================================
+
+TRX is Broadcom's official firmware format for the BCM947xx boards. It's used by
+most of the vendors building devices based on Broadcom's BCM47xx SoCs and is
+supported by the CFE bootloader.
+
+Design of the TRX format is very minimalistic. Its header contains
+identification fields, CRC32 checksum and the locations of embedded partitions.
+Its purpose is to store a few partitions in a format that can be distributed as
+a standalone file and written in a flash memory.
+
+Container can hold up to 4 partitions. The first partition has to contain a
+device executable binary (e.g. a kernel) as it's what the CFE bootloader starts
+executing. Other partitions can be used for operating system purposes. This is
+useful for systems that keep kernel and rootfs separated.
+
+TRX doesn't enforce any strict partition boundaries or size limits. All
+partitions have to be less than the 4GiB max size limit.
+
+There are two existing/known TRX variants:
+1) v1 which contains 3 partitions
+2) v2 which contains 4 partitions
+
+There aren't separated compatible bindings for them as version can be trivialy
+detected by a software parsing TRX header.
+
+Required properties:
+- compatible : (required) must be "brcm,trx"
+
+Optional properties:
+
+- brcm,trx-magic: TRX magic, if it is different from the default magic
+ 0x30524448 as a u32.
+
+Example:
+
+flash@0 {
+ partitions {
+ compatible = "brcm,trx";
+ };
+};