aboutsummaryrefslogtreecommitdiff
path: root/dts/upstream/Bindings/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'dts/upstream/Bindings/net/wireless')
-rw-r--r--dts/upstream/Bindings/net/wireless/brcm,bcm4329-fmac.yaml155
-rw-r--r--dts/upstream/Bindings/net/wireless/esp,esp8089.yaml43
-rw-r--r--dts/upstream/Bindings/net/wireless/ieee80211.yaml44
-rw-r--r--dts/upstream/Bindings/net/wireless/marvell-8xxx.txt70
-rw-r--r--dts/upstream/Bindings/net/wireless/mediatek,mt76.yaml324
-rw-r--r--dts/upstream/Bindings/net/wireless/microchip,wilc1000.yaml95
-rw-r--r--dts/upstream/Bindings/net/wireless/qca,ath9k.yaml90
-rw-r--r--dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml369
-rw-r--r--dts/upstream/Bindings/net/wireless/qcom,ath11k-pci.yaml59
-rw-r--r--dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml472
-rw-r--r--dts/upstream/Bindings/net/wireless/silabs,wfx.yaml132
-rw-r--r--dts/upstream/Bindings/net/wireless/ti,wl1251.txt64
-rw-r--r--dts/upstream/Bindings/net/wireless/ti,wlcore.yaml142
13 files changed, 2059 insertions, 0 deletions
diff --git a/dts/upstream/Bindings/net/wireless/brcm,bcm4329-fmac.yaml b/dts/upstream/Bindings/net/wireless/brcm,bcm4329-fmac.yaml
new file mode 100644
index 00000000000..e564f20d8f4
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices
+
+maintainers:
+ - Arend van Spriel <arend@broadcom.com>
+
+description:
+ The Broadcom Single chip MAC part for the BCM4329 family and
+ later Cypress chips in the same family named CYW4373 and similar.
+ These chips also have a Bluetooth portion described in a separate
+ binding.
+
+allOf:
+ - $ref: ieee80211.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - brcm,bcm43143-fmac
+ - brcm,bcm4341b0-fmac
+ - brcm,bcm4341b4-fmac
+ - brcm,bcm4341b5-fmac
+ - brcm,bcm4329-fmac
+ - brcm,bcm4330-fmac
+ - brcm,bcm4334-fmac
+ - brcm,bcm43340-fmac
+ - brcm,bcm4335-fmac
+ - brcm,bcm43362-fmac
+ - brcm,bcm4339-fmac
+ - brcm,bcm43430a0-fmac
+ - brcm,bcm43430a1-fmac
+ - brcm,bcm43455-fmac
+ - brcm,bcm43456-fmac
+ - brcm,bcm4354-fmac
+ - brcm,bcm4356-fmac
+ - brcm,bcm4359-fmac
+ - brcm,bcm4366-fmac
+ - cypress,cyw4373-fmac
+ - cypress,cyw43012-fmac
+ - infineon,cyw43439-fmac
+ - const: brcm,bcm4329-fmac
+ - enum:
+ - brcm,bcm4329-fmac
+ - pci14e4,43dc # BCM4355
+ - pci14e4,4464 # BCM4364
+ - pci14e4,4488 # BCM4377
+ - pci14e4,4425 # BCM4378
+ - pci14e4,4433 # BCM4387
+
+ reg:
+ description: SDIO function number for the device (for most cases
+ this will be 1) or PCI device identifier.
+
+ interrupts:
+ maxItems: 1
+ description: Out-of-band (OOB) IRQ line for waking up the host
+ in response to WLAN activity. This corresponds to the HOST_WAKE
+ line into the chip.
+
+ interrupt-names:
+ description: Name for the OOB IRQ, this must be set to "host-wake".
+ const: host-wake
+
+ brcm,drive-strength:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Drive strength used for the SDIO pins on the device in mA.
+ minimum: 0
+ maximum: 32
+
+ reset-gpios:
+ maxItems: 1
+ description: A GPIO line connected to the WL_RST line, if present
+ this shall be flagged as active low.
+
+ brcm,ccode-map:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description: Multiple strings for translating ISO3166 country code to
+ brcmfmac firmware country code and revision.
+ items:
+ pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$'
+
+ brcm,ccode-map-trivial:
+ description: |
+ Use a trivial mapping of ISO3166 country codes to brcmfmac firmware
+ country code and revision: cc -> { cc, 0 }. In other words, assume that
+ the CLM blob firmware uses ISO3166 country codes as well, and that all
+ revisions are zero. This property is mutually exclusive with
+ brcm,ccode-map. If both properties are specified, then brcm,ccode-map
+ takes precedence.
+ type: boolean
+
+ brcm,cal-blob:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: A per-device calibration blob for the Wi-Fi radio. This
+ should be filled in by the bootloader from platform configuration
+ data, if necessary, and will be uploaded to the device if present.
+
+ brcm,board-type:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Overrides the board type, which is normally the compatible of
+ the root node. This can be used to decouple the overall system board or
+ device name from the board type for WiFi purposes, which is used to
+ construct firmware and NVRAM configuration filenames, allowing for
+ multiple devices that share the same module or characteristics for the
+ WiFi subsystem to share the same firmware/NVRAM files. On Apple platforms,
+ this should be the Apple module-instance codename prefixed by "apple,",
+ e.g. "apple,honshu".
+
+ apple,antenna-sku:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Antenna SKU used to identify a specific antenna configuration
+ on Apple platforms. This is use to build firmware filenames, to allow
+ platforms with different antenna configs to have different firmware and/or
+ NVRAM. This would normally be filled in by the bootloader from platform
+ configuration data.
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ mmc@80118000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80118000 0x1000>;
+ clocks = <&clk 0>, <&clk 1>;
+ clock-names = "mclk", "apb_pclk";
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <&wl_bt_reg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+ reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+ };
+ };
diff --git a/dts/upstream/Bindings/net/wireless/esp,esp8089.yaml b/dts/upstream/Bindings/net/wireless/esp,esp8089.yaml
new file mode 100644
index 00000000000..0ea84d6fe73
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/esp,esp8089.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/esp,esp8089.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Espressif ESP8089
+
+maintainers:
+ - Hans de Goede <hdegoede@redhat.com>
+
+properties:
+ compatible:
+ const: esp,esp8089
+
+ reg:
+ maxItems: 1
+
+ esp,crystal-26M-en:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ Value for the crystal_26M_en firmware parameter
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ mmc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "esp,esp8089";
+ reg = <1>;
+ esp,crystal-26M-en = <2>;
+ };
+ };
+
+...
diff --git a/dts/upstream/Bindings/net/wireless/ieee80211.yaml b/dts/upstream/Bindings/net/wireless/ieee80211.yaml
new file mode 100644
index 00000000000..d89f7a3f88a
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/ieee80211.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common IEEE 802.11
+
+maintainers:
+ - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description: |
+ This provides documentation of common properties that are valid for
+ all wireless devices
+
+properties:
+ ieee80211-freq-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ minItems: 2
+ maxItems: 2
+ description:
+ List of supported frequency ranges in KHz. This can be used for devices
+ that in a given config support less channels than normally. It may happen
+ chipset supports a wide wireless band but it is limited to some part of
+ it due to used antennas or power amplifier. An example case for this
+ can be tri-band wireless router with two identical chipsets used for two
+ different 5 GHz subbands. Using them incorrectly could not work or
+ decrease performance noticeably
+
+additionalProperties: true
+
+examples:
+ - |
+ pcie0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <2402000 2482000>,
+ <5170000 5250000>;
+ };
+ };
diff --git a/dts/upstream/Bindings/net/wireless/marvell-8xxx.txt b/dts/upstream/Bindings/net/wireless/marvell-8xxx.txt
new file mode 100644
index 00000000000..cdc303caf5f
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/marvell-8xxx.txt
@@ -0,0 +1,70 @@
+Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices
+------
+
+This node provides properties for controlling the Marvell SDIO/PCIE wireless device.
+The node is expected to be specified as a child node to the SDIO/PCIE controller that
+connects the device to the system.
+
+Required properties:
+
+ - compatible : should be one of the following:
+ * "marvell,sd8787"
+ * "marvell,sd8897"
+ * "marvell,sd8978"
+ * "marvell,sd8997"
+ * "nxp,iw416"
+ * "pci11ab,2b42"
+ * "pci1b4b,2b42"
+
+Optional properties:
+
+ - marvell,caldata* : A series of properties with marvell,caldata prefix,
+ represent calibration data downloaded to the device during
+ initialization. This is an array of unsigned 8-bit values.
+ the properties should follow below property name and
+ corresponding array length:
+ "marvell,caldata-txpwrlimit-2g" (length = 566).
+ "marvell,caldata-txpwrlimit-5g-sub0" (length = 502).
+ "marvell,caldata-txpwrlimit-5g-sub1" (length = 688).
+ "marvell,caldata-txpwrlimit-5g-sub2" (length = 750).
+ "marvell,caldata-txpwrlimit-5g-sub3" (length = 502).
+ - marvell,wakeup-pin : a wakeup pin number of wifi chip which will be configured
+ to firmware. Firmware will wakeup the host using this pin
+ during suspend/resume.
+ - interrupts : interrupt pin number to the cpu. driver will request an irq based on
+ this interrupt number. during system suspend, the irq will be enabled
+ so that the wifi chip can wakeup host platform under certain condition.
+ during system resume, the irq will be disabled to make sure
+ unnecessary interrupt is not received.
+ - vmmc-supply: a phandle of a regulator, supplying VCC to the card
+ - mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*"
+ for documentation of MMC power sequence bindings.
+
+Example:
+
+Tx power limit calibration data is configured in below example.
+The calibration data is an array of unsigned values, the length
+can vary between hw versions.
+IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured
+so that firmware can wakeup host using this device side pin.
+
+&mmc3 {
+ vmmc-supply = <&wlan_en_reg>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mwifiex: wifi@1 {
+ compatible = "marvell,sd8897";
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+
+ marvell,caldata_00_txpwrlimit_2g_cfg_set = /bits/ 8 <
+ 0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01>;
+ marvell,wakeup-pin = <3>;
+ };
+};
diff --git a/dts/upstream/Bindings/net/wireless/mediatek,mt76.yaml b/dts/upstream/Bindings/net/wireless/mediatek,mt76.yaml
new file mode 100644
index 00000000000..eabceb84953
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/mediatek,mt76.yaml
@@ -0,0 +1,324 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt76 wireless devices
+
+maintainers:
+ - Felix Fietkau <nbd@nbd.name>
+ - Lorenzo Bianconi <lorenzo@kernel.org>
+ - Ryder Lee <ryder.lee@mediatek.com>
+
+description: |
+ This node provides properties for configuring the MediaTek mt76xx
+ wireless device. The node is expected to be specified as a child
+ node of the PCI controller to which the wireless chip is connected.
+ Alternatively, it can specify the wireless part of the MT7628/MT7688
+ or MT7622/MT7986 SoC.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt76
+ - mediatek,mt7628-wmac
+ - mediatek,mt7622-wmac
+ - mediatek,mt7981-wmac
+ - mediatek,mt7986-wmac
+
+ reg:
+ minItems: 1
+ maxItems: 3
+ description:
+ MT7986 should contain 3 regions consys, dcm, and sku, in this order.
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: major interrupt for rings
+ - description: additional interrupt for ring 19
+ - description: additional interrupt for ring 4
+ - description: additional interrupt for ring 5
+
+ power-domains:
+ maxItems: 1
+
+ memory-region:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+ description:
+ Specify the consys reset for mt7986.
+
+ reset-names:
+ const: consys
+
+ clocks:
+ maxItems: 2
+ description:
+ Specify the consys clocks for mt7986.
+
+ clock-names:
+ items:
+ - const: mcu
+ - const: ap2conn
+
+ mediatek,infracfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the infrastructure bus fabric syscon node.
+ This property is MT7622 specific
+
+ ieee80211-freq-limit: true
+
+ nvmem-cells:
+ items:
+ - description: NVMEM cell with EEPROM
+
+ nvmem-cell-names:
+ items:
+ - const: eeprom
+
+ mediatek,eeprom-data:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ EEPROM data embedded as array.
+
+ mediatek,mtd-eeprom:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to MTD partition
+ - description: offset containing EEPROM data
+ description:
+ Phandle to a MTD partition + offset containing EEPROM data
+ deprecated: true
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Specify if the radio eeprom partition is written in big-endian
+
+ mediatek,eeprom-merge-otp:
+ type: boolean
+ description:
+ Merge EEPROM data with OTP data. Can be used on boards where the flash
+ calibration data is generic and specific calibration data should be
+ pulled from the OTP ROM
+
+ mediatek,disable-radar-background:
+ type: boolean
+ description:
+ Disable/enable radar/CAC detection running on a dedicated offchannel
+ chain available on some hw.
+ Background radar/CAC detection allows to avoid the CAC downtime
+ switching on a different channel during CAC detection on the selected
+ radar channel.
+
+ led:
+ type: object
+ $ref: /schemas/leds/common.yaml#
+ additionalProperties: false
+ properties:
+ led-active-low:
+ description:
+ LED is enabled with ground signal.
+ type: boolean
+
+ led-sources:
+ maxItems: 1
+
+ power-limits:
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^r[0-9]+":
+ type: object
+ additionalProperties: false
+ properties:
+ regdomain:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Regdomain refers to a legal regulatory region. Different
+ countries define different levels of allowable transmitter
+ power, time that a channel can be occupied, and different
+ available channels
+ enum:
+ - FCC
+ - ETSI
+ - JP
+
+ patternProperties:
+ "^txpower-[256]g$":
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^b[0-9]+$":
+ type: object
+ additionalProperties: false
+ properties:
+ channels:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ description:
+ Pairs of first and last channel number of the selected
+ band
+
+ rates-cck:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 4
+ maxItems: 4
+ description:
+ 4 half-dBm per-rate power limit values
+
+ rates-ofdm:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 8
+ maxItems: 8
+ description:
+ 8 half-dBm per-rate power limit values
+
+ rates-mcs:
+ $ref: /schemas/types.yaml#/definitions/uint8-matrix
+ description:
+ Sets of per-rate power limit values for 802.11n/802.11ac
+ rates for multiple channel bandwidth settings.
+ Each set starts with the number of channel bandwidth
+ settings for which the rate set applies, followed by
+ either 8 or 10 power limit values. The order of the
+ channel bandwidth settings is 20, 40, 80 and 160 MHz.
+ maxItems: 4
+ items:
+ minItems: 9
+ maxItems: 11
+
+ rates-ru:
+ $ref: /schemas/types.yaml#/definitions/uint8-matrix
+ description:
+ Sets of per-rate power limit values for 802.11ax rates
+ for multiple channel bandwidth or resource unit settings.
+ Each set starts with the number of channel bandwidth or
+ resource unit settings for which the rate set applies,
+ followed by 12 power limit values. The order of the
+ channel resource unit settings is RU26, RU52, RU106,
+ RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160.
+ items:
+ minItems: 13
+ maxItems: 13
+
+ txs-delta:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ Half-dBm power delta for different numbers of antennas
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: ieee80211.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt7981-wmac
+ - mediatek,mt7986-wmac
+ then:
+ properties:
+ interrupts:
+ minItems: 4
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pcie0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ big-endian;
+
+ led {
+ led-sources = <2>;
+ };
+
+ power-limits {
+ r0 {
+ regdomain = "FCC";
+ txpower-5g {
+ b0 {
+ channels = <36 48>;
+ rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
+ rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
+ /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
+ rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
+ /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
+ };
+ b1 {
+ channels = <100 181>;
+ rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
+ rates-mcs = /bits/ 8 <4 14 14 14 14 14 14 14 14 14 14>;
+ txs-delta = <12 9 6>;
+ rates-ru = /bits/ 8 <7 14 14 14 14 14 14 14 14 14 14 14 14>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ - |
+ wifi@10300000 {
+ compatible = "mediatek,mt7628-wmac";
+ reg = <0x10300000 0x100000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ nvmem-cells = <&eeprom>;
+ nvmem-cell-names = "eeprom";
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ wifi@18000000 {
+ compatible = "mediatek,mt7622-wmac";
+ reg = <0x10300000 0x100000>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+
+ mediatek,infracfg = <&infracfg>;
+
+ power-domains = <&scpsys 3>;
+ };
+
+ - |
+ wifi@18000000 {
+ compatible = "mediatek,mt7986-wmac";
+ resets = <&watchdog 23>;
+ reset-names = "consys";
+ reg = <0x18000000 0x1000000>,
+ <0x10003000 0x1000>,
+ <0x11d10000 0x1000>;
+ interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen 50>,
+ <&topckgen 62>;
+ clock-names = "mcu", "ap2conn";
+ memory-region = <&wmcpu_emi>;
+ };
diff --git a/dts/upstream/Bindings/net/wireless/microchip,wilc1000.yaml b/dts/upstream/Bindings/net/wireless/microchip,wilc1000.yaml
new file mode 100644
index 00000000000..2460ccc0823
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/microchip,wilc1000.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip WILC wireless
+
+maintainers:
+ - Adham Abozaeid <adham.abozaeid@microchip.com>
+ - Ajay Singh <ajay.kathat@microchip.com>
+
+description:
+ The wilc1000 chips can be connected via SPI or SDIO. This document
+ describes the binding to connect wilc devices.
+
+properties:
+ compatible:
+ const: microchip,wilc1000
+
+ reg: true
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description: phandle to the clock connected on rtc clock line.
+ maxItems: 1
+
+ clock-names:
+ const: rtc
+
+ enable-gpios:
+ maxItems: 1
+ description: Used by wilc1000-spi to determine the GPIO line
+ connected to the ENABLE line. If specified, reset-gpios
+ must be specified as well as otherwise the driver cannot
+ ensure the timing required between asserting ENABLE
+ and deasserting RESET. This should be declared as an
+ active-high signal.
+
+ reset-gpios:
+ maxItems: 1
+ description: Used by wilc1000-spi to determine the GPIO line
+ connected to the RESET line. This should be declared as an
+ active-low signal.
+
+required:
+ - compatible
+ - interrupts
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wifi@0 {
+ compatible = "microchip,wilc1000";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ interrupt-parent = <&pioC>;
+ interrupts = <27 0>;
+ clocks = <&pck1>;
+ clock-names = "rtc";
+ enable-gpios = <&pioA 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ - |
+ mmc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+ non-removable;
+ vmmc-supply = <&vcc_mmc1_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ bus-width = <4>;
+ wifi@0 {
+ compatible = "microchip,wilc1000";
+ reg = <0>;
+ interrupt-parent = <&pioC>;
+ interrupts = <27 0>;
+ clocks = <&pck1>;
+ clock-names = "rtc";
+ };
+ };
diff --git a/dts/upstream/Bindings/net/wireless/qca,ath9k.yaml b/dts/upstream/Bindings/net/wireless/qca,ath9k.yaml
new file mode 100644
index 00000000000..0e5412cff2b
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/qca,ath9k.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qca,ath9k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros ath9k wireless devices
+
+maintainers:
+ - Toke Høiland-Jørgensen <toke@toke.dk>
+
+description: |
+ This node provides properties for configuring the ath9k wireless device.
+ The node is expected to be specified as a child node of the PCI controller
+ to which the wireless chip is connected.
+
+allOf:
+ - $ref: ieee80211.yaml#
+
+properties:
+ compatible:
+ enum:
+ - pci168c,0023 # AR5416
+ - pci168c,0024 # AR5418
+ - pci168c,0027 # AR9160
+ - pci168c,0029 # AR9220 and AR9223
+ - pci168c,002a # AR9280 and AR9283
+ - pci168c,002b # AR9285
+ - pci168c,002c # AR2427 - 802.11n bonded out
+ - pci168c,002d # AR9227
+ - pci168c,002e # AR9287
+ - pci168c,0030 # AR9380, AR9381 and AR9382
+ - pci168c,0032 # AR9485
+ - pci168c,0033 # AR9580 and AR9590
+ - pci168c,0034 # AR9462
+ - pci168c,0036 # AR9565
+ - pci168c,0037 # AR1111 and AR9485
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ieee80211-freq-limit: true
+
+ qca,no-eeprom:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates that there is no physical EEPROM connected
+
+ nvmem-cells:
+ items:
+ - description: Reference to an nvmem node for the MAC address
+ - description: Reference to an nvmem node for calibration data
+
+ nvmem-cell-names:
+ items:
+ - const: mac-address
+ - const: calibration
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pcie0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ wifi@0,0 {
+ compatible = "pci168c,002d";
+ reg = <0 0 0 0 0>;
+ interrupts = <3>;
+ qca,no-eeprom;
+ };
+ };
+ - |
+ pci0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ wifi@0,11 {
+ compatible = "pci168c,0029";
+ reg = <0x8800 0 0 0 0>;
+ nvmem-cells = <&macaddr_art_c>, <&cal_art_1000>;
+ nvmem-cell-names = "mac-address", "calibration";
+ };
+ };
diff --git a/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml b/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml
new file mode 100644
index 00000000000..5c4498b762c
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml
@@ -0,0 +1,369 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath10k wireless devices
+
+maintainers:
+ - Kalle Valo <kvalo@kernel.org>
+ - Jeff Johnson <jjohnson@kernel.org>
+
+description:
+ Qualcomm Technologies, Inc. IEEE 802.11ac devices.
+
+properties:
+ compatible:
+ enum:
+ - qcom,ath10k # SDIO-based devices
+ - qcom,ipq4019-wifi
+ - qcom,wcn3990-wifi # SNoC-based devices
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: membase
+
+ interrupts:
+ minItems: 12
+ maxItems: 17
+
+ interrupt-names:
+ minItems: 12
+ maxItems: 17
+
+ memory-region:
+ maxItems: 1
+ description:
+ Reference to the MSA memory region used by the Wi-Fi firmware
+ running on the Q6 core.
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ minItems: 1
+ maxItems: 3
+
+ resets:
+ maxItems: 6
+
+ reset-names:
+ items:
+ - const: wifi_cpu_init
+ - const: wifi_radio_srif
+ - const: wifi_radio_warm
+ - const: wifi_radio_cold
+ - const: wifi_core_warm
+ - const: wifi_core_cold
+
+ ext-fem-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Name of external front end module used.
+ enum:
+ - microsemi-lx5586
+ - sky85703-11
+ - sky85803
+
+ firmware-name:
+ maxItems: 1
+ description:
+ If present, a board or platform specific string used to lookup firmware
+ files for the device.
+
+ wifi-firmware:
+ type: object
+ additionalProperties: false
+ description: |
+ The ath10k Wi-Fi node can contain one optional firmware subnode.
+ Firmware subnode is needed when the platform does not have Trustzone.
+ properties:
+ iommus:
+ maxItems: 1
+ required:
+ - iommus
+
+ ieee80211-freq-limit: true
+
+ qcom,ath10k-calibration-data:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Calibration data + board-specific data as a byte array. The length
+ can vary between hardware versions.
+
+ qcom,ath10k-calibration-variant:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Unique variant identifier of the calibration data in board-2.bin
+ for designs with colliding bus and device specific ids
+
+ qcom,ath10k-pre-calibration-data:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Pre-calibration data as a byte array. The length can vary between
+ hardware versions.
+
+ qcom,coexist-support:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [0, 1]
+ description:
+ Indicate coex support by the hardware.
+
+ qcom,coexist-gpio-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ COEX GPIO number provided to the Wi-Fi firmware.
+
+ qcom,msa-fixed-perm:
+ type: boolean
+ description:
+ Whether to skip executing an SCM call that reassigns the memory
+ region ownership.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: State bits used by the AP to signal the WLAN Q6.
+ items:
+ - description: Signal bits used to enable/disable low power mode
+ on WCN in the case of WoW (Wake on Wireless).
+
+ qcom,smem-state-names:
+ description: The names of the state bits used for SMP2P output.
+ items:
+ - const: wlan-smp2p-out
+
+ qcom,snoc-host-cap-8bit-quirk:
+ type: boolean
+ description:
+ Quirk specifying that the firmware expects the 8bit version
+ of the host capability QMI request
+
+ qcom,xo-cal-data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ XO cal offset to be configured in XO trim register.
+
+ vdd-0.8-cx-mx-supply:
+ description: Main logic power rail
+
+ vdd-1.8-xo-supply:
+ description: Crystal oscillator supply
+
+ vdd-1.3-rfa-supply:
+ description: RFA supply
+
+ vdd-3.3-ch0-supply:
+ description: Primary Wi-Fi antenna supply
+
+ vdd-3.3-ch1-supply:
+ description: Secondary Wi-Fi antenna supply
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+allOf:
+ - $ref: ieee80211.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq4019-wifi
+ then:
+ properties:
+ interrupts:
+ minItems: 17
+ maxItems: 17
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+ - const: msi8
+ - const: msi9
+ - const: msi10
+ - const: msi11
+ - const: msi12
+ - const: msi13
+ - const: msi14
+ - const: msi15
+ - const: legacy
+
+ clocks:
+ items:
+ - description: Wi-Fi command clock
+ - description: Wi-Fi reference clock
+ - description: Wi-Fi RTC clock
+
+ clock-names:
+ items:
+ - const: wifi_wcss_cmd
+ - const: wifi_wcss_ref
+ - const: wifi_wcss_rtc
+
+ required:
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,wcn3990-wifi
+
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ items:
+ - description: XO reference clock
+ - description: Qualcomm Debug Subsystem clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: cxo_ref_clk_pin
+ - const: qdss
+
+ interrupts:
+ items:
+ - description: CE0
+ - description: CE1
+ - description: CE2
+ - description: CE3
+ - description: CE4
+ - description: CE5
+ - description: CE6
+ - description: CE7
+ - description: CE8
+ - description: CE9
+ - description: CE10
+ - description: CE11
+
+ interrupt-names: false
+
+ required:
+ - interrupts
+
+examples:
+ # SNoC
+ - |
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ wifi@18800000 {
+ compatible = "qcom,wcn3990-wifi";
+ reg = <0x18800000 0x800000>;
+ reg-names = "membase";
+ memory-region = <&wlan_msa_mem>;
+ clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+ clock-names = "cxo_ref_clk_pin";
+ interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&anoc2_smmu 0x1900>,
+ <&anoc2_smmu 0x1901>;
+ qcom,snoc-host-cap-8bit-quirk;
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+ vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+ wifi-firmware {
+ iommus = <&apps_smmu 0x1c02 0x1>;
+ };
+ };
+
+ # AHB
+ - |
+ #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+
+ wifi@a000000 {
+ compatible = "qcom,ipq4019-wifi";
+ reg = <0xa000000 0x200000>;
+ resets = <&gcc WIFI0_CPU_INIT_RESET>,
+ <&gcc WIFI0_RADIO_SRIF_RESET>,
+ <&gcc WIFI0_RADIO_WARM_RESET>,
+ <&gcc WIFI0_RADIO_COLD_RESET>,
+ <&gcc WIFI0_CORE_WARM_RESET>,
+ <&gcc WIFI0_CORE_COLD_RESET>;
+ reset-names = "wifi_cpu_init",
+ "wifi_radio_srif",
+ "wifi_radio_warm",
+ "wifi_radio_cold",
+ "wifi_core_warm",
+ "wifi_core_cold";
+ clocks = <&gcc GCC_WCSS2G_CLK>,
+ <&gcc GCC_WCSS2G_REF_CLK>,
+ <&gcc GCC_WCSS2G_RTC_CLK>;
+ clock-names = "wifi_wcss_cmd",
+ "wifi_wcss_ref",
+ "wifi_wcss_rtc";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "msi8",
+ "msi9",
+ "msi10",
+ "msi11",
+ "msi12",
+ "msi13",
+ "msi14",
+ "msi15",
+ "legacy";
+ ieee80211-freq-limit = <5470000 5875000>;
+ };
diff --git a/dts/upstream/Bindings/net/wireless/qcom,ath11k-pci.yaml b/dts/upstream/Bindings/net/wireless/qcom,ath11k-pci.yaml
new file mode 100644
index 00000000000..41d023797d7
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Linaro Limited
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath11k wireless devices (PCIe)
+
+maintainers:
+ - Kalle Valo <kvalo@kernel.org>
+ - Jeff Johnson <jjohnson@kernel.org>
+
+description: |
+ Qualcomm Technologies IEEE 802.11ax PCIe devices
+
+properties:
+ compatible:
+ enum:
+ - pci17cb,1103 # WCN6855
+
+ reg:
+ maxItems: 1
+
+ qcom,ath11k-calibration-variant:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ string to uniquely identify variant of the calibration data for designs
+ with colliding bus and device ids
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pcie {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ bus-range = <0x01 0xff>;
+
+ wifi@0 {
+ compatible = "pci17cb,1103";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ qcom,ath11k-calibration-variant = "LE_X13S";
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml b/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml
new file mode 100644
index 00000000000..a2d55bf4c7a
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml
@@ -0,0 +1,472 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath11k wireless devices
+
+maintainers:
+ - Kalle Valo <kvalo@kernel.org>
+ - Jeff Johnson <jjohnson@kernel.org>
+
+description: |
+ These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
+ devices, for example like AHB based IPQ8074.
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq8074-wifi
+ - qcom,ipq6018-wifi
+ - qcom,wcn6750-wifi
+ - qcom,ipq5018-wifi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 32
+ maxItems: 52
+
+ interrupt-names:
+ maxItems: 52
+
+ qcom,rproc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ DT entry of q6v5-wcss remoteproc driver.
+ Phandle to a node that can contain the following properties
+ * compatible
+ * reg
+ * reg-names
+
+ qcom,ath11k-calibration-variant:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ string to uniquely identify variant of the calibration data in the
+ board-2.bin for designs with colliding bus and device specific ids
+
+ memory-region:
+ minItems: 1
+ maxItems: 2
+ description:
+ phandle to a node describing reserved memory (System RAM memory)
+ used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ ieee80211-freq-limit: true
+
+ wifi-firmware:
+ type: object
+ description: |
+ WCN6750 wifi node can contain one optional firmware subnode.
+ Firmware subnode is needed when the platform does not have Trustzone.
+ required:
+ - iommus
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: State bits used by the AP to signal the WLAN Q6.
+ items:
+ - description: Signal bits used to enable/disable low power mode
+ on WCN6750 in the case of WoW (Wake on Wireless).
+
+ qcom,smem-state-names:
+ description: The names of the state bits used for SMP2P output.
+ items:
+ - const: wlan-smp2p-out
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - qcom,rproc
+
+additionalProperties: false
+
+allOf:
+ - $ref: ieee80211.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq8074-wifi
+ - qcom,ipq6018-wifi
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: misc-pulse1 interrupt events
+ - description: misc-latch interrupt events
+ - description: sw exception interrupt events
+ - description: watchdog interrupt events
+ - description: interrupt event for ring CE0
+ - description: interrupt event for ring CE1
+ - description: interrupt event for ring CE2
+ - description: interrupt event for ring CE3
+ - description: interrupt event for ring CE4
+ - description: interrupt event for ring CE5
+ - description: interrupt event for ring CE6
+ - description: interrupt event for ring CE7
+ - description: interrupt event for ring CE8
+ - description: interrupt event for ring CE9
+ - description: interrupt event for ring CE10
+ - description: interrupt event for ring CE11
+ - description: interrupt event for ring host2wbm-desc-feed
+ - description: interrupt event for ring host2reo-re-injection
+ - description: interrupt event for ring host2reo-command
+ - description: interrupt event for ring host2rxdma-monitor-ring3
+ - description: interrupt event for ring host2rxdma-monitor-ring2
+ - description: interrupt event for ring host2rxdma-monitor-ring1
+ - description: interrupt event for ring reo2ost-exception
+ - description: interrupt event for ring wbm2host-rx-release
+ - description: interrupt event for ring reo2host-status
+ - description: interrupt event for ring reo2host-destination-ring4
+ - description: interrupt event for ring reo2host-destination-ring3
+ - description: interrupt event for ring reo2host-destination-ring2
+ - description: interrupt event for ring reo2host-destination-ring1
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+ - description: interrupt event for ring ppdu-end-interrupts-mac3
+ - description: interrupt event for ring ppdu-end-interrupts-mac2
+ - description: interrupt event for ring ppdu-end-interrupts-mac1
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+ - description: interrupt event for ring rxdma2host-destination-ring-mac3
+ - description: interrupt event for ring rxdma2host-destination-ring-mac2
+ - description: interrupt event for ring rxdma2host-destination-ring-mac1
+ - description: interrupt event for ring host2tcl-input-ring4
+ - description: interrupt event for ring host2tcl-input-ring3
+ - description: interrupt event for ring host2tcl-input-ring2
+ - description: interrupt event for ring host2tcl-input-ring1
+ - description: interrupt event for ring wbm2host-tx-completions-ring3
+ - description: interrupt event for ring wbm2host-tx-completions-ring2
+ - description: interrupt event for ring wbm2host-tx-completions-ring1
+ - description: interrupt event for ring tcl2host-status-ring
+ interrupt-names:
+ items:
+ - const: misc-pulse1
+ - const: misc-latch
+ - const: sw-exception
+ - const: watchdog
+ - const: ce0
+ - const: ce1
+ - const: ce2
+ - const: ce3
+ - const: ce4
+ - const: ce5
+ - const: ce6
+ - const: ce7
+ - const: ce8
+ - const: ce9
+ - const: ce10
+ - const: ce11
+ - const: host2wbm-desc-feed
+ - const: host2reo-re-injection
+ - const: host2reo-command
+ - const: host2rxdma-monitor-ring3
+ - const: host2rxdma-monitor-ring2
+ - const: host2rxdma-monitor-ring1
+ - const: reo2ost-exception
+ - const: wbm2host-rx-release
+ - const: reo2host-status
+ - const: reo2host-destination-ring4
+ - const: reo2host-destination-ring3
+ - const: reo2host-destination-ring2
+ - const: reo2host-destination-ring1
+ - const: rxdma2host-monitor-destination-mac3
+ - const: rxdma2host-monitor-destination-mac2
+ - const: rxdma2host-monitor-destination-mac1
+ - const: ppdu-end-interrupts-mac3
+ - const: ppdu-end-interrupts-mac2
+ - const: ppdu-end-interrupts-mac1
+ - const: rxdma2host-monitor-status-ring-mac3
+ - const: rxdma2host-monitor-status-ring-mac2
+ - const: rxdma2host-monitor-status-ring-mac1
+ - const: host2rxdma-host-buf-ring-mac3
+ - const: host2rxdma-host-buf-ring-mac2
+ - const: host2rxdma-host-buf-ring-mac1
+ - const: rxdma2host-destination-ring-mac3
+ - const: rxdma2host-destination-ring-mac2
+ - const: rxdma2host-destination-ring-mac1
+ - const: host2tcl-input-ring4
+ - const: host2tcl-input-ring3
+ - const: host2tcl-input-ring2
+ - const: host2tcl-input-ring1
+ - const: wbm2host-tx-completions-ring3
+ - const: wbm2host-tx-completions-ring2
+ - const: wbm2host-tx-completions-ring1
+ - const: tcl2host-status-ring
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq8074-wifi
+ - qcom,ipq6018-wifi
+ then:
+ required:
+ - interrupt-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,wcn6750-wifi
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: interrupt event for ring CE1
+ - description: interrupt event for ring CE2
+ - description: interrupt event for ring CE3
+ - description: interrupt event for ring CE4
+ - description: interrupt event for ring CE5
+ - description: interrupt event for ring CE6
+ - description: interrupt event for ring CE7
+ - description: interrupt event for ring CE8
+ - description: interrupt event for ring CE9
+ - description: interrupt event for ring CE10
+ - description: interrupt event for ring DP1
+ - description: interrupt event for ring DP2
+ - description: interrupt event for ring DP3
+ - description: interrupt event for ring DP4
+ - description: interrupt event for ring DP5
+ - description: interrupt event for ring DP6
+ - description: interrupt event for ring DP7
+ - description: interrupt event for ring DP8
+ - description: interrupt event for ring DP9
+ - description: interrupt event for ring DP10
+ - description: interrupt event for ring DP11
+ - description: interrupt event for ring DP12
+ - description: interrupt event for ring DP13
+ - description: interrupt event for ring DP14
+ - description: interrupt event for ring DP15
+ - description: interrupt event for ring DP16
+ - description: interrupt event for ring DP17
+ - description: interrupt event for ring DP18
+ - description: interrupt event for ring DP19
+ - description: interrupt event for ring DP20
+ - description: interrupt event for ring DP21
+ - description: interrupt event for ring DP22
+
+examples:
+ - |
+
+ q6v5_wcss: remoteproc@cd00000 {
+ compatible = "qcom,ipq8074-wcss-pil";
+ reg = <0xcd00000 0x4040>,
+ <0x4ab000 0x20>;
+ reg-names = "qdsp6",
+ "rmb";
+ };
+
+ wifi0: wifi@c000000 {
+ compatible = "qcom,ipq8074-wifi";
+ reg = <0xc000000 0x2000000>;
+ interrupts = <0 320 1>,
+ <0 319 1>,
+ <0 318 1>,
+ <0 317 1>,
+ <0 316 1>,
+ <0 315 1>,
+ <0 314 1>,
+ <0 311 1>,
+ <0 310 1>,
+ <0 411 1>,
+ <0 410 1>,
+ <0 40 1>,
+ <0 39 1>,
+ <0 302 1>,
+ <0 301 1>,
+ <0 37 1>,
+ <0 36 1>,
+ <0 296 1>,
+ <0 295 1>,
+ <0 294 1>,
+ <0 293 1>,
+ <0 292 1>,
+ <0 291 1>,
+ <0 290 1>,
+ <0 289 1>,
+ <0 288 1>,
+ <0 239 1>,
+ <0 236 1>,
+ <0 235 1>,
+ <0 234 1>,
+ <0 233 1>,
+ <0 232 1>,
+ <0 231 1>,
+ <0 230 1>,
+ <0 229 1>,
+ <0 228 1>,
+ <0 224 1>,
+ <0 223 1>,
+ <0 203 1>,
+ <0 183 1>,
+ <0 180 1>,
+ <0 179 1>,
+ <0 178 1>,
+ <0 177 1>,
+ <0 176 1>,
+ <0 163 1>,
+ <0 162 1>,
+ <0 160 1>,
+ <0 159 1>,
+ <0 158 1>,
+ <0 157 1>,
+ <0 156 1>;
+ interrupt-names = "misc-pulse1",
+ "misc-latch",
+ "sw-exception",
+ "watchdog",
+ "ce0",
+ "ce1",
+ "ce2",
+ "ce3",
+ "ce4",
+ "ce5",
+ "ce6",
+ "ce7",
+ "ce8",
+ "ce9",
+ "ce10",
+ "ce11",
+ "host2wbm-desc-feed",
+ "host2reo-re-injection",
+ "host2reo-command",
+ "host2rxdma-monitor-ring3",
+ "host2rxdma-monitor-ring2",
+ "host2rxdma-monitor-ring1",
+ "reo2ost-exception",
+ "wbm2host-rx-release",
+ "reo2host-status",
+ "reo2host-destination-ring4",
+ "reo2host-destination-ring3",
+ "reo2host-destination-ring2",
+ "reo2host-destination-ring1",
+ "rxdma2host-monitor-destination-mac3",
+ "rxdma2host-monitor-destination-mac2",
+ "rxdma2host-monitor-destination-mac1",
+ "ppdu-end-interrupts-mac3",
+ "ppdu-end-interrupts-mac2",
+ "ppdu-end-interrupts-mac1",
+ "rxdma2host-monitor-status-ring-mac3",
+ "rxdma2host-monitor-status-ring-mac2",
+ "rxdma2host-monitor-status-ring-mac1",
+ "host2rxdma-host-buf-ring-mac3",
+ "host2rxdma-host-buf-ring-mac2",
+ "host2rxdma-host-buf-ring-mac1",
+ "rxdma2host-destination-ring-mac3",
+ "rxdma2host-destination-ring-mac2",
+ "rxdma2host-destination-ring-mac1",
+ "host2tcl-input-ring4",
+ "host2tcl-input-ring3",
+ "host2tcl-input-ring2",
+ "host2tcl-input-ring1",
+ "wbm2host-tx-completions-ring3",
+ "wbm2host-tx-completions-ring2",
+ "wbm2host-tx-completions-ring1",
+ "tcl2host-status-ring";
+ qcom,rproc = <&q6v5_wcss>;
+ };
+
+ - |
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ qcn9074_0: wifi@51100000 {
+ no-map;
+ reg = <0x0 0x51100000 0x0 0x03500000>;
+ };
+ };
+
+ pci {
+ pcie0 {
+ #size-cells = <2>;
+ #address-cells = <3>;
+
+ wifi_0: wifi@0 {
+ reg = <0 0 0 0 0>;
+ memory-region = <&qcn9074_0>;
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ wlan_ce_mem: memory@4cd000 {
+ no-map;
+ reg = <0x0 0x004cd000 0x0 0x1000>;
+ };
+
+ wlan_fw_mem: memory@80c00000 {
+ no-map;
+ reg = <0x0 0x80c00000 0x0 0xc00000>;
+ };
+ };
+
+ wifi: wifi@17a10040 {
+ compatible = "qcom,wcn6750-wifi";
+ reg = <0x17a10040 0x0>;
+ iommus = <&apps_smmu 0x1c00 0x1>;
+ interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
+ qcom,rproc = <&remoteproc_wpss>;
+ memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
+ qcom,smem-states = <&wlan_smp2p_out 0>;
+ qcom,smem-state-names = "wlan-smp2p-out";
+ wifi-firmware {
+ iommus = <&apps_smmu 0x1c02 0x1>;
+ };
+ };
diff --git a/dts/upstream/Bindings/net/wireless/silabs,wfx.yaml b/dts/upstream/Bindings/net/wireless/silabs,wfx.yaml
new file mode 100644
index 00000000000..84e5659e50e
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/silabs,wfx.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020, Silicon Laboratories, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs WFxxx
+
+maintainers:
+ - Jérôme Pouiller <jerome.pouiller@silabs.com>
+
+description: >
+ Support for the Wifi chip WFxxx from Silicon Labs. Currently, the only device
+ from the WFxxx series is the WF200 described here:
+ https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf
+
+ The WF200 can be connected via SPI or via SDIO.
+
+ For SDIO:
+
+ Declaring the WFxxx chip in device tree is mandatory (usually, the VID/PID is
+ sufficient for the SDIO devices).
+
+ It is recommended to declare a mmc-pwrseq on SDIO host above WFx. Without
+ it, you may encounter issues during reboot. The mmc-pwrseq should be
+ compatible with mmc-pwrseq-simple. Please consult
+ Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more
+ information.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - prt,prtt1c-wfm200 # Protonic PRTT1C Board
+ - silabs,brd4001a # WGM160P Evaluation Board
+ - silabs,brd8022a # WF200 Evaluation Board
+ - silabs,brd8023a # WFM200 Evaluation Board
+ - const: silabs,wf200 # Chip alone without antenna
+
+ reg:
+ description:
+ When used on SDIO bus, <reg> must be set to 1. When used on SPI bus, it is
+ the chip select address of the device as defined in the SPI devices
+ bindings.
+ maxItems: 1
+
+ interrupts:
+ description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is
+ used, this property is required. When SDIO is used, the "in-band"
+ interrupt provided by the SDIO bus is used unless an interrupt is defined
+ in the Device Tree.
+ maxItems: 1
+
+ reset-gpios:
+ description: (SPI only) Phandle of gpio that will be used to reset chip
+ during probe. Without this property, you may encounter issues with warm
+ boot.
+
+ For SDIO, the reset gpio should declared using a mmc-pwrseq.
+ maxItems: 1
+
+ wakeup-gpios:
+ description: Phandle of gpio that will be used to wake-up chip. Without this
+ property, driver will disable most of power saving features.
+ maxItems: 1
+
+ silabs,antenna-config-file:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Use an alternative file for antenna configuration (aka
+ "Platform Data Set" in Silabs jargon). Default depends of "compatible"
+ string. For "silabs,wf200", the default is 'wf200.pds'.
+
+ local-mac-address: true
+
+ mac-address: true
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@0 {
+ compatible = "silabs,brd8022a", "silabs,wf200";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wfx_irq &wfx_gpios>;
+ reg = <0>;
+ interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>;
+ wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <42000000>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ wfx_pwrseq: wfx_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wfx_reset>;
+ reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ mmc {
+ mmc-pwrseq = <&wfx_pwrseq>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "silabs,brd8022a", "silabs,wf200";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wfx_wakeup>;
+ reg = <1>;
+ wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+...
diff --git a/dts/upstream/Bindings/net/wireless/ti,wl1251.txt b/dts/upstream/Bindings/net/wireless/ti,wl1251.txt
new file mode 100644
index 00000000000..88fd28d15ea
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/ti,wl1251.txt
@@ -0,0 +1,64 @@
+* Texas Instruments wl1251 wireless lan controller
+
+The wl1251 chip can be connected via SPI or via SDIO. This
+document describes the binding for the SPI connected chip.
+
+Required properties:
+- compatible : Should be "ti,wl1251"
+- reg : Chip select address of device
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz
+- interrupts : Should contain interrupt line
+- vio-supply : phandle to regulator providing VIO
+
+Optional properties:
+- ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
+ provides configuration data (calibration, MAC, ...)
+- ti,power-gpio : GPIO connected to chip's PMEN pin if operated in
+ SPI mode
+- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
+ for optional SPI connection related properties,
+
+Examples:
+
+&spi1 {
+ wl1251@0 {
+ compatible = "ti,wl1251";
+
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+ spi-cpol;
+ spi-cpha;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+ vio-supply = <&vio>;
+ ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+ };
+};
+
+&mmc3 {
+ vmmc-supply = <&wlan_en>;
+
+ bus-width = <4>;
+ non-removable;
+ ti,non-removable;
+ cap-power-off-card;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlan: wifi@1 {
+ compatible = "ti,wl1251";
+
+ reg = <1>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */
+
+ ti,wl1251-has-eeprom;
+ };
+};
diff --git a/dts/upstream/Bindings/net/wireless/ti,wlcore.yaml b/dts/upstream/Bindings/net/wireless/ti,wlcore.yaml
new file mode 100644
index 00000000000..75c9489f319
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/ti,wlcore.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/ti,wlcore.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Wilink 6/7/8 (wl12xx/wl18xx) Wireless LAN Controller
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+description:
+ The wl12xx/wl18xx chips can be connected via SPI or via SDIO.
+ Note that the *-clock-frequency properties assume internal clocks. In case
+ of external clocks, new bindings (for parsing the clock nodes) have to be
+ added.
+
+properties:
+ compatible:
+ enum:
+ - ti,wl1271
+ - ti,wl1273
+ - ti,wl1281
+ - ti,wl1283
+ - ti,wl1285
+ - ti,wl1801
+ - ti,wl1805
+ - ti,wl1807
+ - ti,wl1831
+ - ti,wl1835
+ - ti,wl1837
+
+ reg:
+ maxItems: 1
+ description:
+ This is required when connected via SPI, and optional when connected via
+ SDIO.
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: irq
+ - const: wakeup
+
+ vwlan-supply:
+ description:
+ Points to the node of the regulator that powers/enable the wl12xx/wl18xx
+ chip. This is required when connected via SPI.
+
+
+ ref-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Reference clock frequency.
+
+ tcxo-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: TCXO clock frequency.
+
+ clock-xtal:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Indicates that the clock is generated from XTAL.
+
+required:
+ - compatible
+ - interrupts
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,wl1271
+ - ti,wl1273
+ - ti,wl1281
+ - ti,wl1283
+ then:
+ required:
+ - ref-clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ // For wl12xx family:
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlcore1: wlcore@1 {
+ compatible = "ti,wl1271";
+ reg = <1>;
+ spi-max-frequency = <48000000>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ vwlan-supply = <&vwlan_fixed>;
+ clock-xtal;
+ ref-clock-frequency = <38400000>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ // For wl18xx family:
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlcore2: wlcore@0 {
+ compatible = "ti,wl1835";
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+ interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+ vwlan-supply = <&vwlan_fixed>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ // SDIO example:
+ mmc3 {
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlcore3: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 04:32:33 +0000