1 files changed, 184 insertions, 0 deletions
diff --git a/dts/upstream/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml b/dts/upstream/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
new file mode 100644
index 00000000000..f1f4e4f8335
--- /dev/null
+++ b/dts/upstream/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (USB, MSM8998)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for USB-C on
+  several Qualcomm chipsets.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8998-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
+      - qcom,sdm660-qmp-usb3-phy
+      - qcom,sm6115-qmp-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    maxItems: 4
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: phy_phy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  orientation-switch:
+    description:
+      Flag the PHY as possible handler of USB Type-C orientation switching
+    type: boolean
+
+  qcom,tcsr-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the VLS CLAMP register
+    description: Clamp register present in the TCSR
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the PHY
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the USB controller
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+  - qcom,tcsr-reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-usb3-phy
+              - qcom,sdm660-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: cfg_ahb
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+              - qcom,sm6115-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+            - const: pipe
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    phy@c010000 {
+      compatible = "qcom,msm8998-qmp-usb3-phy";
+      reg = <0x0c010000 0x1000>;
+
+      clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+               <&gcc GCC_USB3_CLKREF_CLK>,
+               <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+               <&gcc GCC_USB3_PHY_PIPE_CLK>;
+      clock-names = "aux",
+                    "ref",
+                    "cfg_ahb",
+                    "pipe";
+      clock-output-names = "usb3_phy_pipe_clk_src";
+      #clock-cells = <0>;
+      #phy-cells = <0>;
+
+      resets = <&gcc GCC_USB3_PHY_BCR>,
+               <&gcc GCC_USB3PHY_PHY_BCR>;
+      reset-names = "phy",
+                    "phy_phy";
+
+      vdda-phy-supply = <&vreg_l1a_0p875>;
+      vdda-pll-supply = <&vreg_l2a_1p2>;
+
+      orientation-switch;
+
+      qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          endpoint {
+            remote-endpoint = <&pmic_typec_mux_in>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          endpoint {
+            remote-endpoint = <&usb_dwc3_ss>;
+          };
+        };
+      };
+    };