diff options
Diffstat (limited to 'dts/upstream/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml')
| -rw-r--r-- | dts/upstream/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml | 399 |
1 files changed, 399 insertions, 0 deletions
diff --git a/dts/upstream/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml new file mode 100644 index 00000000000..d74cae9d4d6 --- /dev/null +++ b/dts/upstream/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml @@ -0,0 +1,399 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7622 Pin Controller + +maintainers: + - Sean Wang <sean.wang@kernel.org> + +description: + The MediaTek's MT7622 Pin controller is used to control SoC pins. + +properties: + compatible: + enum: + - mediatek,mt7622-pinctrl + - mediatek,mt7629-pinctrl + + reg: + maxItems: 1 + + reg-names: + items: + - const: eint + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + + gpio-ranges: + maxItems: 1 + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +if: + required: + - interrupt-controller +then: + required: + - reg-names + - interrupts + - "#interrupt-cells" + +patternProperties: + '-pins(-[a-z]+)?$': + type: object + additionalProperties: false + patternProperties: + '^mux(-|$)': + type: object + additionalProperties: false + description: + pinmux configuration nodes. + $ref: /schemas/pinctrl/pinmux-node.yaml + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [antsel, emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, + sd, spi, tdm, uart, watchdog, wifi] + + groups: + description: + An array of strings. Each string contains the name of a group. + + drive-strength: + enum: [4, 8, 12, 16] + + required: + - groups + - function + + allOf: + - if: + properties: + function: + const: antsel + then: + properties: + groups: + items: + enum: [antsel0, antsel1, antsel2, antsel3, antsel4, antsel5, + antsel6, antsel7, antsel8, antsel9, antsel10, + antsel11, antsel12, antsel13, antsel14, antsel15, + antsel16, antsel17, antsel18, antsel19, antsel20, + antsel21, antsel22, antsel23, antsel24, antsel25, + antsel26, antsel27, antsel28, antsel29] + - if: + properties: + function: + const: emmc + then: + properties: + groups: + items: + enum: [emmc, emmc_rst] + - if: + properties: + function: + const: eth + then: + properties: + groups: + items: + enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw, + rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio] + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c0, i2c_0, i2c_1, i2c1_0, i2c1_1, i2c1_2, i2c2_0, + i2c2_1, i2c2_2] + - if: + properties: + function: + const: i2s + then: + properties: + groups: + items: + enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data, + i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws, + i2s1_out_data, i2s2_out_data, i2s3_out_data, + i2s4_out_data] + - if: + properties: + function: + const: ir + then: + properties: + groups: + enum: [ir_0_tx, ir_1_tx, ir_2_tx, ir_0_rx, ir_1_rx, ir_2_rx] + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [ephy_leds, ephy0_led, ephy1_led, ephy2_led, ephy3_led, + ephy4_led, wled, wf2g_led, wf5g_led] + - if: + properties: + function: + const: flash + then: + properties: + groups: + enum: [par_nand, snfi, spi_nor] + - if: + properties: + function: + const: pcie + then: + properties: + groups: + items: + enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken, + pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq, + pcie0_pad_perst, pcie1_pad_perst, pcie_pereset, + pcie_wake, pcie_clkreq] + - if: + properties: + function: + const: pmic + then: + properties: + groups: + enum: [pmic_bus] + - if: + properties: + function: + const: pwm + then: + properties: + groups: + items: + enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1, + pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0, + pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1, + pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3, + pwm_ch7_0, pwm_0, pwm_1] + - if: + properties: + function: + const: sd + then: + properties: + groups: + enum: [sd_0, sd_1] + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spic0_0, spic0_1, spic1_0, spic1_1, spic2_0_wp_hold, + spic2_0, spi_0, spi_1, spi_wp, spi_hold] + - if: + properties: + function: + const: tdm + then: + properties: + groups: + enum: [tdm_0_out_mclk_bclk_ws, tdm_0_in_mclk_bclk_ws, + tdm_0_out_data, tdm_0_in_data, tdm_1_out_mclk_bclk_ws, + tdm_1_in_mclk_bclk_ws, tdm_1_out_data, tdm_1_in_data] + - if: + properties: + function: + const: uart + then: + properties: + groups: + enum: [uart0_0_tx_rx, uart1_0_tx_rx, uart1_0_rts_cts, + uart1_1_tx_rx, uart1_1_rts_cts, uart2_0_tx_rx, + uart2_0_rts_cts, uart2_1_tx_rx, uart2_1_rts_cts, + uart2_2_tx_rx, uart2_2_rts_cts, uart2_3_tx_rx, + uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts, + uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts, + uart4_2_tx_rx, uart4_2_rts_cts, uart0_txd_rxd, + uart1_0_txd_rxd, uart1_0_cts_rts, uart1_1_txd_rxd, + uart1_1_cts_rts, uart2_0_txd_rxd, uart2_0_cts_rts, + uart2_1_txd_rxd, uart2_1_cts_rts] + - if: + properties: + function: + const: watchdog + then: + properties: + groups: + enum: [watchdog] + - if: + properties: + function: + const: wifi + then: + properties: + groups: + enum: [wf0_2g, wf0_5g] + + '^conf(-|$)': + type: object + additionalProperties: false + description: + pinconf configuration nodes. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + groups: + description: + An array of strings. Each string contains the name of a group. + Valid values are the same as the pinmux node. + + pins: + description: + An array of strings. Each string contains the name of a pin. + items: + enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0, + RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS, + I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT, + I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1, + G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2, + G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6, + NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0, + MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1, + MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2, + MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3, + MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL, + PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS, + GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N, + PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2, + AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4, + PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA, + WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4, + WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG, + EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS, + EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N, + WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD, + UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD, + UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N, + PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, + GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK, + TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3, + WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6] + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + input-disable: true + + output-enable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [4, 8, 12, 16] + + slew-rate: + enum: [0, 1] + + mediatek,tdsel: + description: + An integer describing the steps for output level shifter duty + cycle when asserted (high pulse width adjustment). Valid arguments + are from 0 to 15. + $ref: /schemas/types.yaml#/definitions/uint32 + + mediatek,rdsel: + description: + An integer describing the steps for input level shifter duty cycle + when asserted (high pulse width adjustment). Valid arguments are + from 0 to 63. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - pins + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@10211000 { + compatible = "mediatek,mt7622-pinctrl"; + reg = <0 0x10211000 0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + + pinctrl_eth_default: eth-pins { + mux-mdio { + groups = "mdc_mdio"; + function = "eth"; + drive-strength = <12>; + }; + + mux-gmac2 { + groups = "rgmii_via_gmac2"; + function = "eth"; + drive-strength = <12>; + }; + + mux-esw { + groups = "esw"; + function = "eth"; + drive-strength = <8>; + }; + + conf-mdio { + pins = "MDC"; + bias-pull-up; + }; + }; + }; + }; |