diff options
Diffstat (limited to 'dts/upstream/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml')
| -rw-r--r-- | dts/upstream/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml | 416 |
1 files changed, 416 insertions, 0 deletions
diff --git a/dts/upstream/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/dts/upstream/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml new file mode 100644 index 00000000000..7140c312d89 --- /dev/null +++ b/dts/upstream/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml @@ -0,0 +1,416 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,tegra20-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra Power Management Controller (PMC) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra20-pmc + - nvidia,tegra30-pmc + - nvidia,tegra114-pmc + - nvidia,tegra124-pmc + - nvidia,tegra210-pmc + + reg: + maxItems: 1 + + clock-names: + items: + # Tegra clock of the same name + - const: pclk + # 32 KHz clock input + - const: clk32k_in + + clocks: + maxItems: 2 + + '#clock-cells': + const: 1 + description: | + Tegra PMC has clk_out_1, clk_out_2, and clk_out_3. PMC also has blink + control which allows 32Khz clock output to Tegra blink pad. + + Consumer of PMC clock should specify the desired clock by having the + clock ID in its "clocks" phandle cell with PMC clock provider. See + include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC clock IDs. + + '#interrupt-cells': + const: 2 + description: Specifies number of cells needed to encode an interrupt + source. + + interrupt-controller: true + + nvidia,invert-interrupt: + $ref: /schemas/types.yaml#/definitions/flag + description: Inverts the PMU interrupt signal. The PMU is an external Power + Management Unit, whose interrupt output signal is fed into the PMC. This + signal is optionally inverted, and then fed into the ARM GIC. The PMC is + not involved in the detection or handling of this interrupt signal, + merely its inversion. + + nvidia,core-power-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: core power request active-high + + nvidia,sys-clock-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: system clock request active-high + + nvidia,combined-power-req: + $ref: /schemas/types.yaml#/definitions/flag + description: combined power request for CPU and core + + nvidia,cpu-pwr-good-en: + $ref: /schemas/types.yaml#/definitions/flag + description: CPU power good signal from external PMIC to PMC is enabled + + nvidia,suspend-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the suspend mode that the platform should use + oneOf: + - description: LP0, CPU + Core voltage off and DRAM in self-refresh + const: 0 + - description: LP1, CPU voltage off and DRAM in self-refresh + const: 1 + - description: LP2, CPU voltage off + const: 2 + + nvidia,cpu-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power good time in microseconds + + nvidia,cpu-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power off time in microseconds + + nvidia,core-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: core power good time in microseconds + items: + - description: oscillator stable time + - description: power stable time + + nvidia,core-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: core power off time in microseconds + + nvidia,lp0-vec: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Starting address and length of LP0 vector. The LP0 vector contains the + warm boot code that is executed by AVP when resuming from the LP0 state. + The AVP (Audio-Video Processor) is an ARM7 processor and always being + the first boot processor when chip is power on or resume from deep sleep + mode. When the system is resumed from the deep sleep mode, the warm boot + code will restore some PLLs, clocks and then brings up CPU0 for resuming + the system. + items: + - description: starting address of LP0 vector + - description: length of LP0 vector + + core-supply: + description: phandle to voltage regulator connected to the SoC core power + rail + + core-domain: + type: object + description: The vast majority of hardware blocks of Tegra SoC belong to a + core power domain, which has a dedicated voltage rail that powers the + blocks. + additionalProperties: false + properties: + operating-points-v2: + description: Should contain level, voltages and opp-supported-hw + property. The supported-hw is a bitfield indicating SoC speedo or + process ID mask. + + "#power-domain-cells": + const: 0 + + required: + - operating-points-v2 + - "#power-domain-cells" + + i2c-thermtrip: + type: object + description: On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode + exists, hardware-triggered thermal reset will be enabled. + additionalProperties: false + properties: + nvidia,i2c-controller-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: ID of I2C controller to send poweroff command to PMU. + Valid values are described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" + of the Tegra K1 Technical Reference Manual. + + nvidia,bus-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: bus address of the PMU on the I2C bus + + nvidia,reg-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: PMU I2C register address to issue poweroff command + + nvidia,reg-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: power-off command to write to PMU + + nvidia,pinmux-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Pinmux used by the hardware when issuing power-off command. + Defaults to 0. Valid values are described in section 12.5.2 "Pinmux + Support" of the Tegra4 Technical Reference Manual. + + required: + - nvidia,i2c-controller-id + - nvidia,bus-addr + - nvidia,reg-addr + - nvidia,reg-data + + powergates: + type: object + additionalProperties: false + description: | + This node contains a hierarchy of power domain nodes, which should match + the powergates on the Tegra SoC. Each powergate node represents a power- + domain on the Tegra SoC that can be power-gated by the Tegra PMC. + + Hardware blocks belonging to a power domain should contain "power-domains" + property that is a phandle pointing to corresponding powergate node. + + The name of the powergate node should be one of the below. Note that not + every powergate is applicable to all Tegra devices and the following list + shows which powergates are applicable to which devices. + + Please refer to Tegra TRM for mode details on the powergate nodes to use + for each power-gate block inside Tegra. + + Name Description Devices Applicable + -------------------------------------------------------------- + 3d 3D Graphics Tegra20/114/124/210 + 3d0 3D Graphics 0 Tegra30 + 3d1 3D Graphics 1 Tegra30 + aud Audio Tegra210 + dfd Debug Tegra210 + dis Display A Tegra114/124/210 + disb Display B Tegra114/124/210 + heg 2D Graphics Tegra30/114/124/210 + iram Internal RAM Tegra124/210 + mpe MPEG Encode All + nvdec NVIDIA Video Decode Engine Tegra210 + nvjpg NVIDIA JPEG Engine Tegra210 + pcie PCIE Tegra20/30/124/210 + sata SATA Tegra30/124/210 + sor Display interfaces Tegra124/210 + ve2 Video Encode Engine 2 Tegra210 + venc Video Encode Engine All + vdec Video Decode Engine Tegra20/30/114/124 + vic Video Imaging Compositor Tegra124/210 + xusba USB Partition A Tegra114/124/210 + xusbb USB Partition B Tegra114/124/210 + xusbc USB Partition C Tegra114/124/210 + + patternProperties: + "^[a-z0-9]+$": + type: object + additionalProperties: false + properties: + clocks: + minItems: 1 + maxItems: 10 + + resets: + minItems: 1 + maxItems: 8 + + power-domains: + maxItems: 1 + + '#power-domain-cells': + const: 0 + description: Must be 0. + + required: + - clocks + - resets + - '#power-domain-cells' + + pinmux: + type: object + additionalProperties: + type: object + description: | + This is a pad configuration node. On Tegra SoCs a pad is a set of pins + which are configured as a group. The pin grouping is a fixed attribute + of the hardware. The PMC can be used to set pad power state and + signaling voltage. A pad can be either in active or power down mode. + The support for power state and signaling voltage configuration varies + depending on the pad in question. 3.3V and 1.8V signaling voltages are + supported on pins where software controllable signaling voltage + switching is available. + + The pad configuration state nodes are placed under the pmc node and + they are referred to by the pinctrl client properties. For more + information see: + + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + + The pad name should be used as the value of the pins property in pin + configuration nodes. + + The following pads are present on Tegra124 and Tegra132: + + audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, + hsic, hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, + pex-cntrl, sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, + usb_bias + + The following pads are present on Tegra210: + + audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg, + debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, + hdmi, hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, + sdmmc1, sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias + additionalProperties: false + properties: + pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: Must contain name of the pad(s) to be configured. + + low-power-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into power down mode. + + low-power-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into active mode. + + power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. The + values are defined in: + + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h + + Power state can be configured on all Tegra124 and Tegra132 pads. + None of the Tegra124 or Tegra132 pads support signaling voltage + switching. All of the listed Tegra210 pads except pex-cntrl support + power state configuration. Signaling voltage switching is supported + on the following Tegra210 pads: + + audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1, sdmmc3, + spi, spi-hv, uart + + required: + - pins + +required: + - compatible + - reg + - clock-names + - clocks + - '#clock-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra124-pmc + then: + properties: + pinmux: + additionalProperties: + type: object + properties: + pins: + items: + enum: [ audio, bb, cam, comp, csia, csb, cse, dsi, dsib, + dsic, dsid, hdmi, hsic, hv, lvds, mipi-bias, nand, + pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1, + sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, + usb_bias ] + + - if: + properties: + compatible: + contains: + const: nvidia,tegra210-pmc + then: + properties: + pinmux: + additionalProperties: + type: object + properties: + pins: + items: + enum: [ audio, audio-hv, cam, csia, csib, csic, csid, csie, + csif, dbg, debug-nonao, dmic, dp, dsi, dsib, dsic, + dsid, emmc, emmc2, gpio, hdmi, hsic, lvds, mipi-bias, + pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, + usb-bias ] + +additionalProperties: false + +dependencies: + nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] + nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"] + nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"] + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> + #include <dt-bindings/soc/tegra-pmc.h> + + pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x7000e400 0x400>; + core-supply = <®ulator>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; + + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + pd_core: core-domain { + operating-points-v2 = <&core_opp_table>; + #power-domain-cells = <0>; + }; + + powergates { + pd_audio: aud { + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + resets = <&tegra_car 198>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_xusbss: xusba { + clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; + resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + }; + }; |