diff options
Diffstat (limited to 'dts/upstream/src/arm/rockchip/rk3188-bqedison2qc.dts')
| -rw-r--r-- | dts/upstream/src/arm/rockchip/rk3188-bqedison2qc.dts | 739 |
1 files changed, 739 insertions, 0 deletions
diff --git a/dts/upstream/src/arm/rockchip/rk3188-bqedison2qc.dts b/dts/upstream/src/arm/rockchip/rk3188-bqedison2qc.dts new file mode 100644 index 00000000000..9312be362a7 --- /dev/null +++ b/dts/upstream/src/arm/rockchip/rk3188-bqedison2qc.dts @@ -0,0 +1,739 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 MundoReader S.L. + * Author: Heiko Stuebner <heiko.stuebner@bq.com> + */ + +/dts-v1/; +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "rk3188.dtsi" + +/ { + model = "BQ Edison2 Quad-Core"; + compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188"; + + aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &emmc; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vsys>; + pwms = <&pwm1 0 25000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key &usb_int>; + + key-power { + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + linux,input-type = <1>; + debounce-interval = <100>; + wakeup-source; + }; + + wake_on_usb: key-wake-on-usb { + label = "Wake-on-USB"; + gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_hold>; + /* only drive the pin low until device is off */ + active-delay-ms = <3000>; + }; + + lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_in_vop0: endpoint { + remote-endpoint = <&vop0_out_lvds>; + }; + }; + + port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + + panel { + compatible = "innolux,ee101ia-01d", "panel-lvds"; + backlight = <&backlight>; + + /* pin LCD_CS, Nshtdn input of lvds-encoder */ + enable-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_cs>; + power-supply = <&vcc_lcd>; + + data-mapping = "vesa-24"; + height-mm = <163>; + width-mm = <261>; + + panel-timing { + clock-frequency = <72000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <160>; + hfront-porch = <16>; + hsync-len = <10>; + vback-porch = <23>; + vfront-porch = <12>; + vsync-len = <3>; + }; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on>; + reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>; + }; + + avdd_cif: cif-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd-cif"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_avdd_en>; + startup-delay-us = <100000>; + vin-supply = <&vcc28_cif>; + }; + + vcc_5v: vcc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&v5_drv>; + vin-supply = <&vsys>; + }; + + vcc_lcd: lcd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-lcd"; + gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_en>; + startup-delay-us = <50000>; + vin-supply = <&vcc_io>; + }; + + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_drv>; + startup-delay-us = <100000>; + vin-supply = <&vcc_5v>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vccq_emmc: emmc-vccq-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccq-emmc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc_io>; + }; + + /* supplied from the bq24196 */ + vsys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&cru { + assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru ACLK_CPU>, + <&cru HCLK_CPU>, <&cru PCLK_CPU>, + <&cru ACLK_PERI>, <&cru HCLK_PERI>, + <&cru PCLK_PERI>; + assigned-clock-rates = <594000000>, <504000000>, + <300000000>, + <150000000>, <75000000>, + <300000000>, <150000000>, + <75000000>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vccq_emmc>; + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + lis3de: accelerometer@29 { + compatible = "st,lis3de"; + reg = <0x29>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int>; + rotation-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + vdd-supply = <&vcc_io>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + tmp108@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tmp_alrt>; + #thermal-sensor-cells = <0>; + }; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + #clock-cells = <0>; + clock-output-names = "xin32k"; + }; + + bat: battery@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + power-supplies = <&bq24196>; + }; + + act8846: pmic@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + pinctrl-names = "default"; + pinctrl-0 = <&dvs0_ctl &pmic_int>; + + vp1-supply = <&vsys>; + vp2-supply = <&vsys>; + vp3-supply = <&vsys>; + vp4-supply = <&vsys>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vsys>; + inl3-supply = <&vsys>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_log: REG2 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_arm: REG3 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vcc_io: vcc_hdmi: REG4 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vdd_10: REG5 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vdd_12: REG6 { + regulator-name = "VDD_12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc18_cif: REG7 { + regulator-name = "VCC18_CIF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcca_33: REG8 { + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_tp: REG9 { + regulator-name = "VCC_TP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccio_wl: REG10 { + regulator-name = "VCCIO_WL"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc28_cif: REG12 { + regulator-name = "VCC28_CIF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + }; + + bq24196: charger@6b { + compatible = "ti,bq24196"; + reg = <0x6b>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD7 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&charger_int &chg_ctl &otg_en>; + ti,system-minimum-microvolt = <3200000>; + monitored-battery = <&bat>; + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + ft5606: touchscreen@3e { + compatible = "edt,edt-ft5506"; + reg = <0x3e>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int &tp_rst>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; + touchscreen-inverted-y; + /* hw ts resolution does not match display */ + touchscreen-size-y = <1024>; + touchscreen-size-x = <768>; + touchscreen-swapped-x-y; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + rt5616: codec@1b { + compatible = "realtek,rt5616"; + reg = <0x1b>; + clocks = <&cru SCLK_I2S0>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; + vqmmc-supply = <&vccio_wl>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio3>; + interrupts = <RK_PD2 IRQ_TYPE_NONE>; + interrupt-names = "host-wake"; + brcm,drive-strength = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + act8846 { + dvs0_ctl: dvs0-ctl { + rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + pmic_int: pmic-int { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + bq24196 { + charger_int: charger-int { + rockchip,pins = <0 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + /* pin hog to make it select usb profile */ + chg_ctl: chg-ctl { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>; + }; + + /* low: charging, high: complete, fault: blinking */ + chg_det: chg-det { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* charging enabled when pin low and register set */ + chg_en: chg-en { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; + }; + + /* bq29196 powergood (when low) signal */ + dc_det: dc-det { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* wire bq24196 otg pin to high, to enable 500mA charging */ + otg_en: otg-en { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + camera { + cif0_pdn: cif0-pdn { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + cif1_pdn: cif1-pdn { + rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + cif_avdd_en: cif-avdd-en { + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + display { + lcd_cs: lcd-cs { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lcd_en: lcd-en { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ft5606 { + tp_int: tp-int { + rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + tp_rst: tp-rst { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi { + hdmi_int: hdmi-int { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + hdmi_rst: hdmi-rst { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + pwr_hold: pwr-hold { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lis3de { + gsensor_int: gsensor-int { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + mmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + tmp108 { + tmp_alrt: tmp-alrt { + rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + v5_drv: v5-drv { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otg_drv: otg-drv { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_int: usb-int { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rk903 { + bt_host_wake: bt-host-wake { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_reg_on: bt-reg-on { + rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* pin hog to pull the reset high */ + bt_rst: bt-rst { + rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_output_high>; + }; + + bt_wake: bt-wake { + rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake: wifi-host-wake { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_reg_on: wifi-reg-on { + rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + device-wakeup-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake &bt_reg_on &bt_rst &bt_wake>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-0 = <&uart3_xfer &uart3_cts &uart3_rts>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vop0 { + status = "okay"; +}; + +&vop0_out { + vop0_out_lvds: endpoint { + remote-endpoint = <&lvds_in_vop0>; + }; +}; + +&vop1 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdc1_dclk &lcdc1_den &lcdc1_hsync + &lcdc1_vsync &lcdc1_rgb24>; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; |