diff options
Diffstat (limited to 'dts/upstream/src/arm64/amlogic/meson-libretech-cottonwood.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/amlogic/meson-libretech-cottonwood.dtsi | 614 |
1 files changed, 614 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/amlogic/meson-libretech-cottonwood.dtsi b/dts/upstream/src/arm64/amlogic/meson-libretech-cottonwood.dtsi new file mode 100644 index 00000000000..082b72703cd --- /dev/null +++ b/dts/upstream/src/arm64/amlogic/meson-libretech-cottonwood.dtsi @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#include <dt-bindings/clock/g12a-clkc.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + spi0 = &spifc; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dioo2133: audio-amplifier-0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio GPIOX_0 GPIO_ACTIVE_HIGH>; + VCC-supply = <&vcc_5v>; + sound-name-prefix = "10U2"; + }; + + /* TOFIX: handle CVBS_DET on SARADC channel 0 */ + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + led-blue { + compatible = "pwm-leds"; + + led { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_ACTIVITY; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + pwms = <&pwm_ab 1 1250 0>; + active-low; + }; + }; + + led-green { + compatible = "pwm-leds"; + + led { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "default-on"; + max-brightness = <255>; + pwms = <&pwm_cd 1 1250 0>; + active-low; + }; + }; + + led-orange { + compatible = "gpio-leds"; + + led { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_STANDBY; + gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "5V_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + flash_1v8: regulator-flash-1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vcc_3v3>; + }; + + vcc_card: regulator-vcc-card { + compatible = "regulator-fixed"; + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOX_2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + enable-active-high; + gpio-open-drain; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vddao_3v3>; + + /* FIXME: controlled by TEST_N */ + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&dc_in>; + gpio = <&gpio GPIOH_8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + enable-active-high; + gpio-open-drain; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&dc_in>; + }; + + vddcpu_b: regulator-vddcpu-b { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1011000>; + regulator-boot-on; + regulator-always-on; + pwm-supply = <&dc_in>; + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + }; + + vddio_ao18: regulator-vddio-ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vddao_3v3>; + }; + + vddio_c: regulator-vddio-c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; + vin-supply = <&vddao_3v3>; + gpios = <&gpio GPIOX_4 GPIO_ACTIVE_HIGH>; + states = <3300000 0>, + <1800000 1>; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + audio-widgets = "Line", "Lineout"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>, + <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, + <&dioo2133>; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* + * Audio setup: The 40 pins header provides access to 2 TDMs, + * SPDIF In/Out and PDM inputs. + * - TDM A: 2 lanes + * D0: 40/X9 + * D1: 38/X8 + * BCLK: 12/X11 + * FS: 35/X10 + * - TDM B: 4 lanes + * D0: 37/A3 + * D1: 16/A4 + * D2: 18/A5 or 7/AO6 + * D3: 22/A6 or 21/H5 + * BCLK: 29/A1 or 8/AO8 + * FS: 31/A2 or 11/AO7 + * - 2 Master Clocks: + * MCLK0: 15/A0 or 10/AO9 + * MCLK1: 33/X15 + * - SPDIF: + * OUT: 32/A11 + * IN: 21/H5 + * - PDM Input: + * DO: 13/A8 + * D1: 26/A9 + * D2: 22/A6 + * D3: 18/A5 + * DCLK: 36/A7 + * + * TDM C is not usable on the 40 pins connector so it is + * setup for the HDMI 4 lanes i2s. + * + * No pinctrl is enabled by default to preserve the + * genericity of the 40 pins header. Many configurations are + * possible based on the desired use case. Please adjust TDM + * masks, clock setups and pinctrl accordingly. + */ + + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "dsp_a"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_A>; + }; + }; + + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-rx-mask-1 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_B>; + }; + }; + + dai-link-8 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_C>; + }; + }; + + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + + dai-link-10 { + sound-dai = <&toacodec TOACODEC_OUT>; + + codec { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + status = "okay"; + AVDD-supply = <&vddio_ao18>; +}; + +&arb { + status = "okay"; +}; + +&cecb_AO { + status = "okay"; + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&dwc3 { + #address-cells = <1>; + #size-cells = <0>; + + hub: hub@1 { + compatible = "usb5e3,626"; + reg = <1>; + reset-gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&vcc_5v>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>, <ð_phy_irq_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&periphs_pinctrl { + spi_cs_disable_pins: spi-cs-disable { + mux { + groups = "BOOT_14"; + function = "gpio_periphs"; + bias-disable; + output-high; + }; + }; + + eth_phy_irq_pins: eth-phy-irq { + mux { + groups = "GPIOZ_14"; + function = "gpio_periphs"; + bias-pull-up; + output-disable; + }; + }; +}; + +&pwm_AO_cd { + status = "okay"; + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_b_x7_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_d_x3_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <200000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vcc_card>; + vqmmc-supply = <&vddio_c>; +}; + +/* + * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS + * and eMMC Data 4 to 7 pins. + * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, + * and change bus-width to 4 then spifc can be enabled. + */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>, + <&spi_cs_disable_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&spifc { + status = "disabled"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio BOOT_14 GPIO_ACTIVE_LOW>; + + w25lq128d: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <80000000>; + }; +}; + +&tdmif_a { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toacodec { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb2_phy1 { + phy-supply = <&dc_in>; +}; + +&usb3_pcie_phy { + phy-supply = <&vcc_5v>; +}; + +&usb { + status = "okay"; +}; |