diff options
Diffstat (limited to 'dts/upstream/src/arm64/amlogic/meson-s4.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/amlogic/meson-s4.dtsi | 517 |
1 files changed, 517 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/amlogic/meson-s4.dtsi b/dts/upstream/src/arm64/amlogic/meson-s4.dtsi new file mode 100644 index 00000000000..10896f9df68 --- /dev/null +++ b/dts/upstream/src/arm64/amlogic/meson-s4.dtsi @@ -0,0 +1,517 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-s4-gpio.h> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> +#include <dt-bindings/power/meson-s4-power.h> + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + firmware { + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,meson-s4-pwrc"; + #power-domain-cells = <1>; + }; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@fff01000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xfff01000 0 0x1000>, + <0x0 0xfff02000 0 0x2000>, + <0x0 0xfff04000 0 0x2000>, + <0x0 0xfff06000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb4: bus@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x480000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + + clkc_periphs: clock-controller@0 { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&clkc_pll CLKID_GP0_PLL>, + <&clkc_pll CLKID_MPLL0>, + <&clkc_pll CLKID_MPLL1>, + <&clkc_pll CLKID_MPLL2>, + <&clkc_pll CLKID_MPLL3>, + <&clkc_pll CLKID_HDMI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", + "fclk_div4", "fclk_div5", "fclk_div7", + "hifi_pll", "gp0_pll", "mpll0", "mpll1", + "mpll2", "mpll3", "hdmi_pll", "xtal"; + #clock-cells = <1>; + }; + + clkc_pll: clock-controller@8000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + + watchdog@2100 { + compatible = "amlogic,s4-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,meson-s4-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4000 { + reg = <0x0 0x4000 0x0 0x004c>, + <0x0 0x40c0 0x0 0x0220>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 82>; + }; + + remote_pins: remote-pin { + mux { + groups = "remote_in"; + function = "remote_in"; + bias-disable; + }; + }; + + i2c0_pins1: i2c0-pins1 { + mux { + groups = "i2c0_sda", + "i2c0_scl"; + function = "i2c0"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins1: i2c1-pins1 { + mux { + groups = "i2c1_sda_c", + "i2c1_scl_c"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins2: i2c1-pins2 { + mux { + groups = "i2c1_sda_d", + "i2c1_scl_d"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins3: i2c1-pins3 { + mux { + groups = "i2c1_sda_h", + "i2c1_scl_h"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins4: i2c1-pins4 { + mux { + groups = "i2c1_sda_x", + "i2c1_scl_x"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins1: i2c2-pins1 { + mux { + groups = "i2c2_sda_d", + "i2c2_scl_d"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins2: i2c2-pins2 { + mux { + groups = "i2c2_sda_h8", + "i2c2_scl_h9"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins3: i2c2-pins3 { + mux { + groups = "i2c2_sda_h0", + "i2c2_scl_h1"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins1: i2c3-pins1 { + mux { + groups = "i2c3_sda_x", + "i2c3_scl_x"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins2: i2c3-pins2 { + mux { + groups = "i2c3_sda_z", + "i2c3_scl_z"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins1: i2c4-pins1 { + mux { + groups = "i2c4_sda_c", + "i2c4_scl_c"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins2: i2c4-pins2 { + mux { + groups = "i2c4_sda_d", + "i2c4_scl_d"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins3: i2c4-pins3 { + mux { + groups = "i2c4_sda_z", + "i2c4_scl_z"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + nand_pins: nand-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + }; + }; + + spicc0_pins_x: spicc0-pins_x { + mux { + groups = "spi_a_mosi_x", + "spi_a_miso_x", + "spi_a_clk_x"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_h: spicc0-pins-h { + mux { + groups = "spi_a_mosi_h", + "spi_a_miso_h", + "spi_a_clk_h"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_z: spicc0-pins-z { + mux { + groups = "spi_a_mosi_z", + "spi_a_miso_z", + "spi_a_clk_z"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,meson-s4-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + + eth_phy: mdio-multiplexer@28000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x28000 0x0 0xa4>; + + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_ETHPHY>, + <&xtal>, + <&clkc_pll CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet-phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; + + spicc0: spi@50000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x50000 0x0 0x44>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SPICC0>, + <&clkc_periphs CLKID_SPICC0_EN>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@66000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x66000 0x0 0x20>; + interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_A>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@68000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x68000 0x0 0x20>; + interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_B>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@6a000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6a000 0x0 0x20>; + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@6c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6c000 0x0 0x20>; + interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_D>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@6e000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6e000 0x0 0x20>; + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_E>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + nand: nand-controller@8c800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>; + reg-names = "nfc", "emmc"; + interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_SD_EMMC_C>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + status = "disabled"; + }; + + uart_b: serial@7a000 { + compatible = "amlogic,meson-s4-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x7a000 0x0 0x18>; + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + reset: reset-controller@2000 { + compatible = "amlogic,meson-s4-reset"; + reg = <0x0 0x2000 0x0 0x98>; + #reset-cells = <1>; + }; + + ir: ir@84040 { + compatible = "amlogic,meson-s4-ir"; + reg = <0x0 0x84040 0x0 0x30>; + interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + hwrng: rng@440788 { + compatible = "amlogic,meson-s4-rng"; + reg = <0x0 0x440788 0x0 0x0c>; + }; + }; + + ethmac: ethernet@fdc00000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xfdc00000 0x0 0x10000>, + <0x0 0xfe024000 0x0 0x8>; + + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + power-domains = <&pwrc PWRC_S4_ETH_ID>; + clocks = <&clkc_periphs CLKID_ETH>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; + }; +}; |