diff options
Diffstat (limited to 'dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi | 29 |
1 files changed, 18 insertions, 11 deletions
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi index 6f081158714..98544741ce1 100644 --- a/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi +++ b/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/phy/phy-imx8-pcie.h> #include <dt-bindings/pwm/pwm.h> #include "imx8mm.dtsi" +#include "imx8mm-overdrive.dtsi" / { chosen { @@ -110,6 +111,22 @@ startup-delay-us = <200000>; }; + /* + * By default we enable CTRL_SLEEP_MOCI#, this is required to have + * peripherals on the carrier board powered. + * If more granularity or power saving is required this can be disabled + * in the carrier board device tree files. + */ + reg_force_sleep_moci: regulator-force-sleep-moci { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + regulator-name = "CTRL_SLEEP_MOCI#"; + }; + reg_usb_otg1_vbus: regulator-usb-otg1 { compatible = "regulator-fixed"; enable-active-high; @@ -333,16 +350,6 @@ "SODIMM_212", "SODIMM_151", "SODIMM_153"; - - ctrl-sleep-moci-hog { - gpio-hog; - /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ - gpios = <1 GPIO_ACTIVE_HIGH>; - line-name = "CTRL_SLEEP_MOCI#"; - output-high; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; - }; }; /* On-module I2C */ @@ -929,7 +936,7 @@ /* Verdin GPIO_9_DSI (pulled-up as active-low) */ pinctrl_gpio_9_dsi: gpio9dsigrp { fsl,pins = - <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x146>; /* SODIMM 17 */ + <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x1c6>; /* SODIMM 17 */ }; /* Verdin GPIO_10_DSI (pulled-up as active-low) */ |