diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/msm8953-motorola-potter.dts')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/msm8953-motorola-potter.dts | 305 |
1 files changed, 305 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/msm8953-motorola-potter.dts b/dts/upstream/src/arm64/qcom/msm8953-motorola-potter.dts new file mode 100644 index 00000000000..711d84dad9d --- /dev/null +++ b/dts/upstream/src/arm64/qcom/msm8953-motorola-potter.dts @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Sireesh Kodali + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; + +/ { + model = "Motorola G5 Plus"; + compatible = "motorola,potter", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id = <0x46 0x83a0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (2220 * 1920 * 3)>; + + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84300000 { + reg = <0x0 0x84300000 0x0 0x2000000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + + reserved@aefd2000 { + reg = <0x0 0xaefd2000 0x0 0x2e000>; + no-map; + }; + + reserved@eefe4000 { + reg = <0x0 0xeefe4000 0x0 0x1c000>; + no-map; + }; + + ramoops@ef000000 { + compatible = "ramoops"; + reg = <0x0 0xef000000 0x0 0x80000>; + console-size = <0x40000>; + ftrace-size = <0>; + record-size = <0x3f800>; + pmsg-size = <0x800>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@20 { + reg = <0x20>; + compatible = "syna,rmi4-i2c"; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_reset>; + + vdd-supply = <&pm8953_l22>; + vio-supply = <&pm8953_l6>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <500>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <25000>; + qcom,num-strings = <3>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <1 2>, <96 4>, <111 1>, <126 1>; + + ts_reset: ts-reset-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; |