aboutsummaryrefslogtreecommitdiff
path: root/dts/upstream/src/arm64/qcom/msm8992-xiaomi-libra.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/upstream/src/arm64/qcom/msm8992-xiaomi-libra.dts')
-rw-r--r--dts/upstream/src/arm64/qcom/msm8992-xiaomi-libra.dts430
1 files changed, 430 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/msm8992-xiaomi-libra.dts b/dts/upstream/src/arm64/qcom/msm8992-xiaomi-libra.dts
new file mode 100644
index 00000000000..133f9c2540b
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/msm8992-xiaomi-libra.dts
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &res_hyp_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+ model = "Xiaomi Mi 4C";
+ compatible = "xiaomi,libra", "qcom,msm8992";
+ chassis-type = "handset";
+
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <251 0>, <252 0>;
+ qcom,pmic-id = <65545 65546 0 0>;
+ qcom,board-id = <12 0>;
+
+ /* This enables graphical output via bootloader-enabled display */
+ chosen {
+ bootargs = "earlycon=tty0 console=tty0 maxcpus=1";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer0: framebuffer@3400000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x3400000 0 (1080 * 1920 * 3)>;
+ width = <1080>;
+ height = <1920>;
+ stride = <(1080 * 3)>;
+ format = "r8g8b8";
+ /*
+ * That's a lot of clocks, but it's necessary due
+ * to unused clk cleanup & no panel driver yet..
+ */
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>;
+ power-domains = <&mmcc MDSS_GDSC>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ button {
+ label = "Volume Up";
+ gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ memory_hole: hole@6400000 {
+ reg = <0 0x06400000 0 0x600000>;
+ no-map;
+ };
+
+ memory_hole2: hole2@6c00000 {
+ reg = <0 0x06c00000 0 0x2400000>;
+ no-map;
+ };
+
+ mpss_mem: mpss@9000000 {
+ reg = <0 0x09000000 0 0x5a00000>;
+ no-map;
+ };
+
+ tzapp: tzapp@ea00000 {
+ reg = <0 0x0ea00000 0 0x1900000>;
+ no-map;
+ };
+
+ mdm_rfsa_mem: mdm-rfsa@ca0b0000 {
+ reg = <0 0xca0b0000 0 0x10000>;
+ no-map;
+ };
+
+ rmtfs_mem: rmtfs@ca100000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xca100000 0 0x180000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+
+ qseecom_mem: qseecom@cb400000 {
+ reg = <0 0xcb400000 0 0x1c00000>;
+ no-mem;
+ };
+
+ adsp_rfsa_mem: adsp-rfsa@cd000000 {
+ reg = <0 0xcd000000 0 0x10000>;
+ no-map;
+ };
+
+ sensor_rfsa_mem: sensor-rfsa@cd010000 {
+ reg = <0 0xcd010000 0 0x10000>;
+ no-map;
+ };
+
+ ramoops@dfc00000 {
+ compatible = "ramoops";
+ reg = <0 0xdfc00000 0 0x40000>;
+ console-size = <0x10000>;
+ record-size = <0x10000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x20000>;
+ };
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ /* Atmel or Synaptics touchscreen */
+};
+
+&blsp1_i2c5 {
+ status = "okay";
+
+ /* ST lsm6db0 gyro/accelerometer */
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ /*
+ * NXP NCI NFC,
+ * TI USB320 Type-C controller,
+ * Pericom 30216a USB (de)mux switch
+ */
+};
+
+&blsp2_i2c1 {
+ status = "okay";
+
+ /* cm36686 proximity and ambient light sensor */
+};
+
+&blsp2_i2c5 {
+ status = "okay";
+
+ /* Silabs si4705 FM transmitter */
+};
+
+&blsp2_uart2 {
+ status = "okay";
+};
+
+&pm8994_spmi_regulators {
+ VDD_APC0: s8 {
+ regulator-min-microvolt = <680000>;
+ regulator-max-microvolt = <1180000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */
+ VDD_APC1: s11 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ vdd_l1-supply = <&pm8994_s7>;
+ vdd_l2_26_28-supply = <&pm8994_s3>;
+ vdd_l3_11-supply = <&pm8994_s3>;
+ vdd_l4_27_31-supply = <&pm8994_s3>;
+ vdd_l5_7-supply = <&pm8994_s3>;
+ vdd_l6_12_32-supply = <&pm8994_s5>;
+ vdd_l8_16_30-supply = <&vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vph_pwr>;
+ vdd_l14_15-supply = <&pm8994_s5>;
+ vdd_l17_29-supply = <&vph_pwr>;
+ vdd_l20_21-supply = <&vph_pwr>;
+ vdd_l25-supply = <&pm8994_s5>;
+ vdd_lvs1_2-supply = <&pm8994_s4>;
+
+ /* S1, S2, S6 and S12 are managed by RPMPD */
+
+ pm8994_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8994_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ regulator-system-load = <325000>;
+ };
+
+ pm8994_s5: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ pm8994_s7: s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */
+
+ pm8994_l1: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l2: l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+
+ pm8994_l3: l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8994_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ /* L5 is inaccessible from RPM */
+
+ pm8994_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ /* L7 is inaccessible from RPM */
+
+ pm8994_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l11: l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8994_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8994_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l17: l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ pm8994_l19: l19 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8994_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-system-load = <570000>;
+ };
+
+ pm8994_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ };
+
+ pm8994_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8994_l23: l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8994_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ pm8994_l25: l25 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l26: l26 {
+ regulator-min-microvolt = <987500>;
+ regulator-max-microvolt = <987500>;
+
+ };
+
+ pm8994_l27: l27 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8994_l28: l28 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l29: l29 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8994_l30: l30 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l31: l31 {
+ regulator-min-microvolt = <1262500>;
+ regulator-max-microvolt = <1262500>;
+ };
+
+ pm8994_l32: l32 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_lvs1: lvs1 {};
+ pm8994_lvs2: lvs2 {};
+ };
+
+ pmi8994_regulators: regulators-1 {
+ compatible = "qcom,rpm-pmi8994-regulators";
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ pmi8994_s1: s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ /* S2 & S3 - VDD_GFX */
+
+ pmi8994_bby: boost-bypass {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
+};
+
+&sdhc1 {
+ status = "okay";
+
+ mmc-hs400-1_8v;
+ vmmc-supply = <&pm8994_l20>;
+ vqmmc-supply = <&pm8994_s4>;
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 06:20:40 +0000