1 files changed, 93 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/pm4125.dtsi b/dts/upstream/src/arm64/qcom/pm4125.dtsi
new file mode 100644
index 00000000000..cf8c822e80c
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/pm4125.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm2250", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+
+			pm4125_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				debounce = <15625>;
+				bias-pull-up;
+			};
+
+			pm4125_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm4125_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm4125-vbus-reg", "qcom,pm8150b-vbus-reg";
+			reg = <0x1100>;
+			status = "disabled";
+		};
+
+		pm4125_typec: typec@1500 {
+			compatible = "qcom,pm4125-typec", "qcom,pmi632-typec";
+			reg = <0x1500>;
+			interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect";
+			vdd-vbus-supply = <&pm4125_vbus>;
+
+			status = "disabled";
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm4125_gpios: gpio@c000 {
+			compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm4125_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm2250", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};