diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/pm6150.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/pm6150.dtsi | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/pm6150.dtsi b/dts/upstream/src/arm64/qcom/pm6150.dtsi new file mode 100644 index 00000000000..6de6ed562d9 --- /dev/null +++ b/dts/upstream/src/arm64/qcom/pm6150.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pm6150_thermal: pm6150-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm6150_temp>; + + trips { + pm6150_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm6150_crit: crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pm6150_lsid0: pmic@0 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6150_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pm6150_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + pm6150_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm6150_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm6150-vbus-reg", + "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pm6150_typec: typec@1500 { + compatible = "qcom,pm6150-typec", + "qcom,pm8150b-typec"; + reg = <0x1500>, <0x1700>; + interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + status = "disabled"; + }; + + pm6150_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@6 { + reg = <ADC5_DIE_TEMP>; + label = "die_temp"; + }; + }; + + pm6150_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pm6150_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + pm6150_gpios: gpio@c000 { + compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm6150_lsid1: pmic@1 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; |