diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/pm8916.dtsi')
-rw-r--r-- | dts/upstream/src/arm64/qcom/pm8916.dtsi | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/pm8916.dtsi b/dts/upstream/src/arm64/qcom/pm8916.dtsi new file mode 100644 index 00000000000..4b2e8fb47d2 --- /dev/null +++ b/dts/upstream/src/arm64/qcom/pm8916.dtsi @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + pm8916_0: pmic@0 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + pm8916_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + + watchdog { + compatible = "qcom,pm8916-wdt"; + interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; + timeout-sec = <60>; + }; + }; + + pm8916_charger: charger@1000 { + compatible = "qcom,pm8916-lbc"; + reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>; + reg-names = "chgr", "bat_if", "usb", "misc"; + + interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "vbat_det", + "fast_chg", + "chg_fail", + "chg_done", + "bat_pres", + "temp_ok", + "coarse_det", + "usb_vbus", + "chg_gone", + "overtemp"; + + status = "disabled"; + }; + + pm8916_usbin: usb-detect@1300 { + compatible = "qcom,pm8941-misc"; + reg = <0x1300>; + interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_vbus"; + status = "disabled"; + }; + + pm8916_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8916_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8916_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@0 { + reg = <VADC_USBIN>; + qcom,pre-scaling = <1 10>; + }; + channel@7 { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 3>; + }; + channel@8 { + reg = <VADC_DIE_TEMP>; + }; + channel@9 { + reg = <VADC_REF_625MV>; + }; + channel@a { + reg = <VADC_REF_1250MV>; + }; + channel@e { + reg = <VADC_GND_REF>; + }; + channel@f { + reg = <VADC_VDD_VADC>; + }; + }; + + pm8916_bms: battery@4000 { + compatible = "qcom,pm8916-bms-vm"; + reg = <0x4000>; + interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cv_leave", + "cv_enter", + "ocv_good", + "ocv_thr", + "fifo", + "state_chg"; + + status = "disabled"; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8916_mpps: mpps@a000 { + compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8916_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8916_gpios: gpio@c000 { + compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8916_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8916_1: pmic@1 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8916_pwm: pwm { + compatible = "qcom,pm8916-pwm"; + + #pwm-cells = <2>; + + status = "disabled"; + }; + + pm8916_vib: vibrator@c000 { + compatible = "qcom,pm8916-vib"; + reg = <0xc000>; + status = "disabled"; + }; + + pm8916_codec: audio-codec@f000 { + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000>; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + #sound-dai-cells = <1>; + status = "disabled"; + }; + }; +}; |