diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/pmi632.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/pmi632.dtsi | 204 |
1 files changed, 204 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/pmi632.dtsi b/dts/upstream/src/arm64/qcom/pmi632.dtsi new file mode 100644 index 00000000000..94d53b1cf6c --- /dev/null +++ b/dts/upstream/src/arm64/qcom/pmi632.dtsi @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz> + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmi632-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmi632_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@2 { + compatible = "qcom,pmi632", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi632_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pmi632_typec: typec@1500 { + compatible = "qcom,pmi632-typec"; + reg = <0x1500>; + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect"; + vdd-vbus-supply = <&pmi632_vbus>; + + status = "disabled"; + }; + + pmi632_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmi632_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + channel@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + channel@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + channel@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + channel@7 { + reg = <ADC5_USB_IN_I>; + qcom,pre-scaling = <1 1>; + label = "usb_in_i_uv"; + }; + + channel@8 { + reg = <ADC5_USB_IN_V_16>; + qcom,pre-scaling = <1 16>; + label = "usb_in_v_div_16"; + }; + + channel@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + + channel@4b { + reg = <ADC5_BAT_ID_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + label = "bat_id"; + }; + + channel@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + + channel@84 { + reg = <ADC5_VBAT_SNS>; + qcom,pre-scaling = <1 3>; + label = "vbat_sns"; + }; + }; + + pmi632_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pmi632_pbs_client3: pbs@7400 { + compatible = "qcom,pmi632-pbs", "qcom,pbs"; + reg = <0x7400>; + }; + + pmi632_sdam_7: nvram@b600 { + compatible = "qcom,spmi-sdam"; + reg = <0xb600>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb600 0x100>; + }; + + pmi632_gpios: gpio@c000 { + compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmi632_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@3 { + compatible = "qcom,pmi632", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi632_lpg: pwm { + compatible = "qcom,pmi632-lpg"; + + nvmem = <&pmi632_sdam_7>; + nvmem-names = "lpg_chan_sdam"; + qcom,pbs = <&pmi632_pbs_client3>; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; +}; |