diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/sa8775p-pmics.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/sa8775p-pmics.dtsi | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/sa8775p-pmics.dtsi b/dts/upstream/src/arm64/qcom/sa8775p-pmics.dtsi new file mode 100644 index 00000000000..eaa43f022a6 --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sa8775p-pmics.dtsi @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmm8654au_0_thermal: pm8775-0-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_0_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_1_thermal: pm8775-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_1_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_2_thermal: pm8775-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_2_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_3_thermal: pm8775-3-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_3_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +}; + +&spmi_bus { + pmm8654au_0: pmic@0 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_0_pon: pon@1200 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1200>, <0x800>; + reg-names = "hlos", "pbs"; + + pmm8654au_0_pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + debounce = <15625>; + }; + + pmm8654au_0_pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts-extended = <&spmi_bus 0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + status = "disabled"; + }; + }; + + pmm8654au_0_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_0_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmm8654au_0_sdam_0: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; + }; + + pmm8654au_1: pmic@2 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_1_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_1_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_2: pmic@4 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_2_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_2_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_3: pmic@6 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_3_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_3_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_3_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; |