diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/sc7180-trogdor-homestar.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/sc7180-trogdor-homestar.dtsi | 353 |
1 files changed, 353 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-homestar.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor-homestar.dtsi new file mode 100644 index 00000000000..2ba3bbf3b9a --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-homestar.dtsi @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ + +#include "sc7180-trogdor-rt5682i-sku.dtsi" + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + max98360a_1: amplifier-1 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_2: amplifier-2 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_3: amplifier-3 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + pp3300_touch: pp3300-touch-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_touch"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_touch>; + + vin-supply = <&pp3300_a>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <965>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <55000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <73000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + /* + * The atna33xc20 really likes to be power cycled to keep it from + * getting in a bad state. This is the reason that the touchscreen + * rail and eDP rails are separate from each other on homestar (but + * not other trogdor devices) Make sure it starts "off" at bootup. + */ + /delete-property/ regulator-boot-on; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@14 { + compatible = "goodix,gt7375p"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + panel = <&panel>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_touch>; + }; +}; + +/* Panel controls backlight over aux channel */ + +&backlight { + status = "disabled"; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&panel { + compatible = "samsung,atna33xc20"; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + /delete-property/ backlight; +}; + +&pm6150_adc { + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + label = "skin_therm"; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&secondary_mi2s { + qcom,playback-sd-lines = <0 1>; +}; + +&sound_multimedia1_codec { + sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_HOMESTAR"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pins = "gpio67"; +}; + +&sec_mi2s_active { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; +}; + +&ts_reset_l { + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "AMP_EN2", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "SEL_LCM", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "AMP_DIN_2", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "VDD_RESET_1.8V", + "ID0", + "", + "ID1", + "AVDD_LCD_EN", + "MIPI_1.8V_EN", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "PP1800_MIPI_SW_EN", + "EN_PP3300_TOUCH", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + en_pp3300_touch: en-pp3300-touch-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; |