diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/sc7180-trogdor-kingoftown.dts')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/sc7180-trogdor-kingoftown.dts | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-kingoftown.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-kingoftown.dts new file mode 100644 index 00000000000..d6db7d83adc --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-kingoftown.dts @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Kingoftown board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Kingoftown"; + compatible = "google,kingoftown", "qcom,sc7180"; +}; + +&ap_tp_i2c { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&panel { + compatible = "edp-panel"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_KINGOFTOWN"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pins = "gpio67"; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "TP_INT_L", /* 0 */ + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", /* 10 */ + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "", + "", /* 20 */ + "", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "", + "", /* 30 */ + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", /* 40 */ + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", /* 50 */ + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", /* 60 */ + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "", + "", /* 70 */ + "", + "", + "", + "EN_FP_RAILS", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", /* 80 */ + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "", + "", + "", + "", + "AP_SKU_ID1", /* 90 */ + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", /* 100 */ + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", /* 110 */ + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; |