diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/sc8280xp-pmics.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/sc8280xp-pmics.dtsi | 248 |
1 files changed, 248 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/sc8280xp-pmics.dtsi b/dts/upstream/src/arm64/qcom/sc8280xp-pmics.dtsi new file mode 100644 index 00000000000..945de77911d --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sc8280xp-pmics.dtsi @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8280_1_thermal: pm8280-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8280_1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pm8280_2_thermal: pm8280-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8280_2_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmk8280: pmic@0 { + compatible = "qcom,pmk8350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8280_pon: pon@1300 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; + + pmk8280_pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + status = "disabled"; + }; + + pmk8280_pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8280_vadc: adc@3100 { + compatible = "qcom,spmi-adc7"; + reg = <0x3100>; + interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_die_temp"; + }; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "pmk8350_xo_therm"; + }; + + channel@103 { + reg = <PM8350_ADC7_DIE_TEMP(1)>; + qcom,pre-scaling = <1 1>; + label = "pmc8280_1_die_temp"; + }; + + channel@303 { + reg = <PM8350_ADC7_DIE_TEMP(3)>; + qcom,pre-scaling = <1 1>; + label = "pmc8280_2_die_temp"; + }; + + channel@403 { + reg = <PMR735A_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pmr735a_die_temp"; + }; + }; + + pmk8280_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm5-gen2"; + reg = <0x3400>; + interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + pmk8280_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts-extended = <&spmi_bus 0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + wakeup-source; + status = "disabled"; + }; + + pmk8280_sdam_6: nvram@8500 { + compatible = "qcom,spmi-sdam"; + reg = <0x8500>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8500 0x100>; + status = "disabled"; + }; + }; + + pmc8280_1: pmic@1 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8280_1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmc8280_1_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280_1_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8280c: pmic@2 { + compatible = "qcom,pm8350c", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280c_gpios: gpio@8800 { + compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280c_gpios 0 0 9>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmc8280c_lpg: pwm { + compatible = "qcom,pm8350c-pwm"; + + #address-cells = <1>; + #size-cells = <0>; + + #pwm-cells = <2>; + + status = "disabled"; + }; + }; + + pmc8280_2: pmic@3 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8280_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmc8280_2_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280_2_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmr735a: pmic@4 { + compatible = "qcom,pmr735a", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735a_gpios: gpio@8800 { + compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735a_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; |