diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi | 692 |
1 files changed, 692 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi b/dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi new file mode 100644 index 00000000000..a4b722e0fc1 --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi @@ -0,0 +1,692 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2020, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +#include "pm660.dtsi" +#include "pm660l.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/leds/common.h> + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <318 0>; + qcom,board-id = <8 1>; + qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>; + + /* This part enables graphical output via bootloader-enabled display */ + chosen { + bootargs = "earlycon=tty0 console=tty0"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + status = "okay"; + }; + }; + + board_vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + regulator-always-on; + regulator-boot-on; + }; + + cam_vdig_imx300_219_vreg: cam-vdig-imx300-219-regulator { + compatible = "regulator-fixed"; + regulator-name = "cam_vdig_imx300_219_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_vdig_default>; + }; + + cam_vana_front_vreg: cam-vana-front-regulator { + compatible = "regulator-fixed"; + regulator-name = "cam_vana_front_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&imx219_vana_default>; + }; + + cam_vana_rear_vreg: cam-vana-rear-regulator { + compatible = "regulator-fixed"; + regulator-name = "cam_vana_rear_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>; + regulator-always-on; + pinctrl-names = "default"; + pinctrl-0 = <&imx300_vana_default>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + key-camera-focus { + label = "Camera Focus"; + gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&tlmm 113 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + key-vol-down { + label = "Volume Down"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + status = "okay"; + }; + + debug@ffb00000 { + reg = <0x00 0xffb00000 0x00 0x100000>; + no-map; + }; + + cont_splash_mem: splash@9d400000 { + reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; + no-map; + }; + }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; +}; + +&adsp_pil { + firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt"; +}; + +&blsp_i2c1 { + status = "okay"; + + touchscreen: synaptics-rmi4-i2c@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 45 0x2008>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_lcd_id_active>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <220>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + /* SMB1351 charger */ +}; + +/* I2C3, 4, 5, 7 and 8 are disabled on this board. */ + +&blsp_i2c6 { + status = "okay"; + + /* NXP NFC */ +}; + +&blsp1_uart2 { + status = "okay"; + + /* MSM serial console */ +}; + +&blsp2_uart1 { + status = "okay"; + + /* HCI Bluetooth */ +}; + +&pm660l_lpg { + qcom,power-source = <1>; + + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + +&pm660l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <17500>; + qcom,num-strings = <2>; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEUP>; +}; + +&qhee_code { + reg = <0x00 0x85800000 0x00 0x3700000>; +}; + +&qusb2phy0 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm660l-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; + vdd_l2-supply = <&vreg_bob>; + vdd_l3_l5_l7_l8-supply = <&vreg_bob>; + vdd_l4_l6-supply = <&vreg_bob>; + vdd_bob-supply = <&vph_pwr>; + + vreg_s1b_1p125: s1 { + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_s2b_1p05: s2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + /* + * At least on Nile's configuration, S3B/S4B (VDD_CX) and + * S5B (VDD_MX) are managed only through RPM Power Domains. + * Trying to set a voltage on the main supply will create + * havoc and freeze the SoC. + * In any case, reference voltages for these regulators are: + * S3B/S4B: 0.870V + * S5B: 0.915V + */ + + /* LDOs */ + vreg_l1b_0p925: l1 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <928000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l2b_2p95: l2 { + /* + * This regulator supports 1.648 - 3.104V on this board + * but we set a max voltage of anything less than 2.7V + * to satisfy a condition in sdhci.c that will disable + * 3.3V SDHCI signaling, which happens to be not really + * supported on the Xperia Nile/Ganges platform. + */ + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2696000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l3b_3p0: l3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + + vreg_l4b_2p95: l4 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* + * Downstream specifies a range of 1721-3600mV, + * but the only assigned consumers are SDHCI2 VMMC + * and Coresight QPDI that both request pinned 2.95V. + * Tighten the range to 1.8-3.328 (closest to 3.3) to + * make the mmc driver happy. + */ + vreg_l5b_2p95: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l6b_3p3: l6 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3312000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l7b_3p125: l7 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3128000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l8b_3p3: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + /* L9B (870mV) is currently unused */ + /* L10B (915mV) is currently unused */ + + vreg_bob: bob { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3624000>; + regulator-enable-ramp-delay = <500>; + regulator-ramp-delay = <0>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm660-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; + vdd_l2_l3-supply = <&vreg_s2b_1p05>; + vdd_l5-supply = <&vreg_s2b_1p05>; + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; + + /* + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed + * by the Core Power Reduction hardened (CPRh) and the + * Operating State Manager (OSM) HW automatically. + */ + + vreg_s4a_2p04: s4 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + vreg_s5a_1p35: s5 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_s6a_0p87: s6 { + regulator-min-microvolt = <504000>; + regulator-max-microvolt = <992000>; + regulator-enable-ramp-delay = <150>; + regulator-ramp-delay = <0>; + }; + + /* LDOs */ + vreg_l1a_1p225: l1 { + regulator-min-microvolt = <1226000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l2a_1p0: l2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1008000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1008000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l5a_0p848: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l6a_1p3: l6 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1368000>; + regulator-allow-set-load; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l7a_1p2: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1804000>; + regulator-max-microvolt = <1896000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l11a_1p8: l11 { + regulator-min-microvolt = <1784000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + /* This gives power to the LPDDR4: never turn it off! */ + vreg_l13a_1p8: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-boot-on; + regulator-always-on; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1904000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + /* L16A (2.70V) is unused */ + + vreg_l17a_1p8: l17 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l18a_1v8: l18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <10>; + regulator-min-microamp = <200>; + regulator-max-microamp = <50000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + }; +}; + +&sdc2_state_on { + sd-cd-pins { + pins = "gpio54"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd-pins { + pins = "gpio54"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; +}; + +&sdhc_1 { + status = "okay"; + supports-cqe; + + /* SoMC Nile platform's eMMC doesn't support HS200 mode */ + mmc-ddr-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l5b_2p95>; + vqmmc-supply = <&vreg_l2b_2p95>; +}; + +&tlmm { + gpio-reserved-ranges = <8 4>; + + ts_int_active: ts-int-active-state { + pins = "gpio45"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_lcd_id_active: ts-lcd-id-active-state { + pins = "gpio56"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio64", "gpio113"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + imx300_vana_default: imx300-vana-default-state { + pins = "gpio50"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + imx219_vana_default: imx219-vana-default-state { + pins = "gpio51"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cam_vdig_default: cam-vdig-default-state { + pins = "gpio52"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; +}; + +&usb3 { + qcom,select-utmi-as-pipe-clk; + + status = "okay"; +}; + +&usb3_dwc3 { + maximum-speed = "high-speed"; + phys = <&qusb2phy0>; + phy-names = "usb2-phy"; + + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; |