diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/sdm660-xiaomi-lavender.dts')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/sdm660-xiaomi-lavender.dts | 428 |
1 files changed, 428 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/sdm660-xiaomi-lavender.dts b/dts/upstream/src/arm64/qcom/sdm660-xiaomi-lavender.dts new file mode 100644 index 00000000000..7167f75bced --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sdm660-xiaomi-lavender.dts @@ -0,0 +1,428 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com> + * Copyright (c) 2021, Dang Huynh <danct12@riseup.net> + */ + +/dts-v1/; + +#include "sdm660.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + model = "Xiaomi Redmi Note 7"; + compatible = "xiaomi,lavender", "qcom,sdm660"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x9d400000 0 (1080 * 2340 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-volup { + label = "Volume Up"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@a0000000 { + compatible = "ramoops"; + reg = <0x0 0xa0000000 0x0 0x400000>; + console-size = <0x20000>; + record-size = <0x20000>; + ftrace-size = <0x0>; + pmsg-size = <0x20000>; + }; + + framebuffer_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x23ff000>; + no-map; + }; + }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qusb2phy0 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm660l-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; + vdd_l2-supply = <&vreg_bob>; + vdd_l3_l5_l7_l8-supply = <&vreg_bob>; + vdd_l4_l6-supply = <&vreg_bob>; + vdd_bob-supply = <&vph_pwr>; + + vreg_s1b_1p125: s1 { + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-enable-ramp-delay = <200>; + }; + + vreg_s2b_1p05: s2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <200>; + }; + + /* LDOs */ + vreg_l1b_0p925: l1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <925000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + /* SDHCI 3.3V signal doesn't seem to be supported. */ + vreg_l2b_2p95: l2 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2696000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l3b_3p3: l3 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l4b_2p95: l4 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* + * Downstream specifies a range of 1721-3600mV, + * but the only assigned consumers are SDHCI2 VMMC + * and Coresight QPDI that both request pinned 2.95V. + * Tighten the range to 1.8-3.328 (closest to 3.3) to + * make the mmc driver happy. + */ + vreg_l5b_2p95: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l7b_3p125: l7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3125000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8b_3p3: l8 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <500>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm660-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; + vdd_l2_l3-supply = <&vreg_s2b_1p05>; + vdd_l5-supply = <&vreg_s2b_1p05>; + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; + + /* + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed + * by the Core Power Reduction hardened (CPRh) and the + * Operating State Manager (OSM) HW automatically. + */ + + vreg_s4a_2p04: s4 { + regulator-min-microvolt = <1805000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + vreg_s5a_1p35: s5 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <200>; + }; + + vreg_s6a_0p87: s6 { + regulator-min-microvolt = <504000>; + regulator-max-microvolt = <992000>; + regulator-enable-ramp-delay = <150>; + }; + + /* LDOs */ + vreg_l1a_1p225: l1 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l2a_1p0: l2 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1010000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1010000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l5a_0p848: l5 { + regulator-min-microvolt = <525000>; + regulator-max-microvolt = <950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l6a_1p3: l6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1370000>; + regulator-allow-set-load; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l7a_1p2: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l11a_1p8: l11 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + }; + + /* This gives power to the LPDDR4: never turn it off! */ + vreg_l13a_1p8: l13 { + regulator-min-microvolt = <1780000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <250>; + regulator-boot-on; + regulator-always-on; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <250>; + regulator-always-on; + }; + + vreg_l17a_1p8: l17 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + }; +}; + +&pm660l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; +}; + +&sdc2_state_on { + sd-cd-pins { + pins = "gpio54"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd-pins { + pins = "gpio54"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; +}; + +&sdhc_1 { + status = "okay"; + supports-cqe; + + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l5b_2p95>; + vqmmc-supply = <&vreg_l2b_2p95>; +}; + +&tlmm { + gpio-reserved-ranges = <8 4>; +}; + +&usb3 { + qcom,select-utmi-as-pipe-clk; + + status = "okay"; +}; + +&usb3_dwc3 { + maximum-speed = "high-speed"; + phys = <&qusb2phy0>; + phy-names = "usb2-phy"; + + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; |