diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi | 869 |
1 files changed, 869 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi b/dts/upstream/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi new file mode 100644 index 00000000000..ae0ca48b89a --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi @@ -0,0 +1,869 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/delete-node/ &cdsp_mem; +/delete-node/ &gpu_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &mpss_mem; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &venus_mem; + +/ { + qcom,msm-id = <339 0x20000>; /* SM8150 v2 */ + qcom,board-id = <8 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9c000000 0 0x2300000>; + /* Griffin BL initializes in 2.5k mode, not 4k */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet (& no dispcc either).. + */ + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = <KEY_CAMERA>; + gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + cam0_vdig_vreg: cam0-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera0_vdig_vreg"; + gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam1_vdig_vreg: cam1-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera1_vdig_vreg"; + gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&sub_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam2_vdig_vreg: cam2-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera2_vdig_vreg"; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&chat_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam3_vdig_vreg: cam3-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera3_vdig_vreg"; + gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&supwc_pwr_en>; + pinctrl-names = "default"; + }; + + cam_vmdr_vreg: cam-vmdr-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera_vmdr_vreg"; + gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_vmdr_en>; + pinctrl-names = "default"; + }; + + rgbcir_vreg: rgbcir-regulator { + compatible = "regulator-fixed"; + regulator-name = "rgbcir_vreg"; + gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rgbc_ir_pwr_en>; + pinctrl-names = "default"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + mpss_mem: memory@8dc00000 { + reg = <0x0 0x8dc00000 0x0 0x9600000>; + no-map; + }; + + venus_mem: memory@97200000 { + reg = <0x0 0x97200000 0x0 0x500000>; + no-map; + }; + + slpi_mem: memory@97700000 { + reg = <0x0 0x97700000 0x0 0x1400000>; + no-map; + }; + + ipa_fw_mem: memory@98b00000 { + reg = <0x0 0x98b00000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@98b10000 { + reg = <0x0 0x98b10000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@98b15000 { + reg = <0x0 0x98b15000 0x0 0x2000>; + no-map; + }; + + spss_mem: memory@98c00000 { + reg = <0x0 0x98c00000 0x0 0x100000>; + no-map; + }; + + cdsp_mem: memory@98d00000 { + reg = <0x0 0x98d00000 0x0 0x1400000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2400000>; + no-map; + }; + + cdsp_sec_mem: memory@a4c00000 { + reg = <0x0 0xa4c00000 0x0 0x3c00000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp_mem { + reg = <0x0 0x8be00000 0x0 0x1e00000>; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s2a_0p6: smps2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_1p9: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L13 is unused. */ + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p8: ldo18 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + + vreg_s1c_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PM8009 is not present on these boards, even if downstream sources suggest so. */ +}; + +&i2c4 { + status = "okay"; + + /* Qcom SMB1355 @ c */ + /* Qcom SMB1390 @ 10 */ + /* Qcom FSA4480 USB-C audio switch @ 43 */ + + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <47 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c7 { + status = "okay"; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c10 { + status = "okay"; + + /* Samsung touchscreen @ 48 */ +}; + +&pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "", + "NC", + "NC", + "", + "NC", + "SUPWC_PWR_EN", + "", + "NC", + "NC"; /* GPIO_10 */ + + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + supwc_pwr_en: supwc-pwr-en-state { + pins = "gpio7"; + function = "normal"; + qcom,drive-strength = <1>; + power-source = <1>; + drive-push-pull; + output-low; + }; +}; + +&pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "TS_VDDH_EN", + "LCD_ID", + "", + "NC", /* GPIO_10 */ + "NC", + "RF_ID"; + + snapshot_n: snapshot-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio2"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pm8150l_gpios { + gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */ + "NC", + "MAIN_CAM_PWR_VMDR_EN", + "NC", + "", + "NC", + "NC", + "FP_LDO_EN", + "NC", + "NC", /* GPIO_10 */ + "NC", + "NC"; + + main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state { + pins = "gpio3"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <0>; + drive-push-pull; + output-low; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-sdio; + no-mmc; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <126 4>; + gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */ + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", + "NFC_ESE_SPI_CS_N", + "NC", + "NC", + "DISP_RESET_N", + "DEBUG_GPIO0", + "MDP_VSYNC_P", + "TS_I2C_SDA", + "TS_I2C_SCL", /* GPIO_10 */ + "CAM_SOF", + "CAM2_RST_N", + "CAM_MCLK0", + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "NC", + "MAIN_CAM_PWR_EN", + "CAM3_RST_N", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "NC", + "CAM0_RST_N", + "RGBC_IR_PWR_EN", + "CAM1_RST_N", /* GPIO_30 */ + "CCI_I2C_SDA2", + "CCI_I2C_SCL2", + "CCI_I2C_SDA3", + "CCI_I2C_SCL3", + "NC", + "DEBUG_GPIO1", + "RGBC_IR_INT", + "USB_CC_DIR", + "NC", + "NC", /* GPIO_40 */ + "NFC_EN", + "NFC_ESE_PWR_REQ", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "NFC_IRQ", + "NFC_DWL_REQ", + "UIM2_DETECT_EN", + "WLAN_SW_CTRL", /* GPIO_50 */ + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "NC", + "TS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "HW_ID_0", + "NC", /* GPIO_60 */ + "QLINK_REQUEST", + "QLINK_ENABLE", + "WMSS_RESET_N", + "SDM_GRFC_8", + "WDOG_DISABLE", + "NC", + "NC", + "PA_INDICATOR_OR", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", /* GPIO_70 */ + "SDM_RFFE0_DATA", + "SDM_RFFE0_CLK", + "SDM_RFFE1_DATA", + "SDM_RFFE1_CLK", + "SDM_RFFE2_DATA", + "SDM_RFFE2_CLK", + "SDM_RFFE3_DATA", + "SDM_RFFE3_CLK", + "SUB_CAM_PWR_EN", + "FP_RESET_N", /* GPIO_80 */ + "NC", + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DVDT_WRT_DET_AND", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "UDON_SWITCH_SEL", + "SD_CARD_DET_N", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "USB_AUDIO_EN1", /* GPIO_100 */ + "DISP_ERR_FG", + "NC", + "NC", + "NC", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_DET", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NFC_CLK_REQ", + "SW_SERVICE", + "NC", + "RF_ID_EXTENSION", + "ALS_PROX_INT_N", + "FP_INT", + "DVDT_WRT_DET_OR", + "BAROMETER_INT", /* GPIO_120 */ + "ACC_COVER_OPEN", + "TS_INT_N", + "CODEC_INT1_N", + "CODEC_INT2_N", + "TX_GTR_THRES_IN", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "NC", /* GPIO_130 */ + "DVDT_ENABLE", + "ACCEL_INT", + "NC", + "MAG_INT_N", + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "HW_ID_1", + "NC", /* GPIO_140 */ + "NC", + "NC", + "CODEC_RST_N", + "CDC_SPI_MISO", + "CDC_SPI_MOSI", + "CDC_SPI_SCLK", + "CDC_SPI_CS_N", + "NC", + "LPASS_SLIMBUS_CLK", + "LPASS_SLIMBUS_DATA0", /* GPIO_150 */ + "LPASS_SLIMBUS_DATA1", + "USB_AUDIO_EN2", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "COMPASS_I2C_SDA", + "COMPASS_I2C_SCL", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", /* GPIO_160 */ + "SSC_SENSOR_I2C_SDA", + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "SSC_UART_1_TX", + "SSC_UART_1_RX", + "WL_CMD_CLK_CHAIN0", + "WL_CMD_DATA_CHAIN0", /* GPIO_170 */ + "WL_CMD_CLK_CHAIN1", + "WL_CMD_DATA_CHAIN1", + "WL_BT_COEX_CLK", + "WL_BT_COEX_DATA"; + + main_cam_pwr_en: main-cam-pwr-en-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + chat_cam_pwr_en: chat-cam-pwr-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + rgbc_ir_pwr_en: rgbc-ir-pwr-en-state { + pins = "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + sub_cam_pwr_en: sub-cam-pwr-en-state { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart2 { + status = "okay"; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l18a_0p8>; +}; |