aboutsummaryrefslogtreecommitdiff
path: root/dts/upstream/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/upstream/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts')
-rw-r--r--dts/upstream/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts306
1 files changed, 306 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/dts/upstream/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts
new file mode 100644
index 00000000000..c6f402c3ef3
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8350-sony-xperia-sagami.dtsi"
+
+/ {
+ model = "Sony Xperia 1 III";
+ compatible = "sony,pdx215-generic", "qcom,sm8350";
+};
+
+&i2c13 {
+ pmic@75 {
+ compatible = "dlg,slg51000";
+ reg = <0x75>;
+ dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_pwr_a_cs>;
+
+ regulators {
+ slg51000_a_ldo1: ldo1 {
+ regulator-name = "slg51000_a_ldo1";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_a_ldo2: ldo2 {
+ regulator-name = "slg51000_a_ldo2";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_a_ldo3: ldo3 {
+ regulator-name = "slg51000_a_ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_a_ldo4: ldo4 {
+ regulator-name = "slg51000_a_ldo4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_a_ldo5: ldo5 {
+ regulator-name = "slg51000_a_ldo5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_a_ldo6: ldo6 {
+ regulator-name = "slg51000_a_ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_a_ldo7: ldo7 {
+ regulator-name = "slg51000_a_ldo7";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+ };
+ };
+};
+
+&pm8350b_gpios {
+ gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+ "NC",
+ "NC",
+ "NC",
+ "SNAPSHOT_N",
+ "CAM_PWR_LD_EN",
+ "NC",
+ "FOCUS_N";
+
+ cam_pwr_a_cs: cam-pwr-a-cs-state {
+ pins = "gpio1";
+ function = "normal";
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <1>;
+ drive-push-pull;
+ output-high;
+ };
+};
+
+&pm8350c_gpios {
+ gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+ "FL_STROBE_TRIG_TELE",
+ "NC",
+ "WLC_TXPWR_EN",
+ "NC",
+ "RGBC_IR_PWR_EN",
+ "NC",
+ "NC",
+ "WIDEC_PWR_EN";
+};
+
+&tlmm {
+ gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+ "APPS_I2C_0_SCL",
+ "UWIDEC_PWR_EN",
+ "HAP_RST_N",
+ "WLC_I2C_SDA",
+ "WLC_I2C_SCL",
+ "PM8008_1_RESET_N",
+ "WLC_INT_N",
+ "OIS_TELE_I2C_SDA",
+ "OIS_TELE_I2C_SCL",
+ "PM8350_OPTION", /* GPIO_10 */
+ "NC",
+ "APPS_I2C_1_SDA",
+ "APPS_I2C_1_SCL",
+ "NC",
+ "NC",
+ "CAM1_RESET_N",
+ "LEO_CAM0_RESET_N",
+ "DEBUG_UART_TX",
+ "DEBUG_UART_RX",
+ "TS_I2C_SDA", /* GPIO_20 */
+ "TS_I2C_SCL",
+ "TS_RESET_N",
+ "TS_INT_N",
+ "DISP_RESET_N",
+ "SW_SERVICE",
+ "DISP_ERR_FG",
+ "TX_GTR_THRES_IN",
+ "NC",
+ "NC",
+ "NC", /* GPIO_30 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "SPK_AMP_INT_N",
+ "SPK_AMP_RESET_N",
+ "FP_INT_N",
+ "FP_RESET_N",
+ "NC", /* GPIO_40 */
+ "NC",
+ "DEBUG_GPIO0",
+ "FORCE_USB_BOOT",
+ "FP_SPI_MISO",
+ "FP_SPI_MOSI",
+ "FP_SPI_CLK",
+ "FP_SPI_CS_N",
+ "SPK_AMP_I2C_SDA",
+ "SPK_AMP_I2C_SCL",
+ "NC", /* GPIO_50 */
+ "HAP_INT_N",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "SBU_SW_OE",
+ "SBU_SW_SEL",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_CLK",
+ "NFC_ESE_SPI_CS",
+ "NFC_I2C_SDA", /* GPIO_60 */
+ "NFC_I2C_SCL",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "HST_WLAN_EN",
+ "HST_BT_EN",
+ "HW_ID_0",
+ "HW_ID_1",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX", /* GPIO_70 */
+ "HST_BT_UART_RX",
+ "HAP_I2C_SDA",
+ "HAP_I2C_SCL",
+ "RF_LCD_ID_EN",
+ "RF_ID_EXTENSION",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HALL_INT_N", /* GPIO_80 */
+ "USB_CC_DIR",
+ "DISP_VSYNC",
+ "NC",
+ "NC",
+ "CAM_SOF_TELE",
+ "NFC_DWL_REQ",
+ "NFC_IRQ",
+ "WCD_RST_N",
+ "ALS_PROX_INT_N",
+ "NC", /* GPIO_90 */
+ "NC",
+ "TRAY_DET",
+ "UDON_SWITCH_SEL",
+ "PCIE0_RESET_N",
+ "PCIE0_CLK_REQ_N",
+ "PCIE0_WAKE_N",
+ "CAM_SOF",
+ "RF_ID_EXTENSION_2",
+ "RGBC_IR_INT",
+ "CAM_MCLK0", /* GPIO_100 */
+ "CAM_MCLK1",
+ "CAM_MCLK2",
+ "CAM_MCLK3",
+ "CAM_MCLK4",
+ "NC",
+ "CAM2_RESET_N",
+ "CCI_I2C0_SDA",
+ "CCI_I2C0_SCL",
+ "CCI_I2C1_SDA",
+ "CCI_I2C1_SCL", /* GPIO_110 */
+ "CCI_I2C2_SDA",
+ "CCI_I2C2_SCL",
+ "CCI_I2C3_SDA",
+ "CCI_I2C3_SCL",
+ "NC",
+ "PM8008_1_IRQ",
+ "CAM3_RESET_N",
+ "IMU1_INT",
+ "EXT_VD0_XVS",
+ "NC", /* GPIO_120 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HAP_I2S_CLK",
+ "HAP_I2S_DOUT",
+ "HAP_TRG1",
+ "HAP_I2S_SYNC",
+ "HST_BT_WLAN_SLIMBUS_CLK",
+ "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+ "NC",
+ "UIM2_DETECT_EN",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RESET",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RESET",
+ "TRAY_DET", /* GPIO_140 */
+ "SM_RFFE0_CLK",
+ "SM_RFFE0_DATA",
+ "SM_RFFE1_CLK",
+ "SM_RFFE1_DATA",
+ "SM_MSS_GRFC4",
+ "SM_MSS_GRFC5",
+ "SM_MSS_GRFC6",
+ "SM_MSS_GRFC7",
+ "SM_RFFE4_CLK",
+ "SM_RFFE4_DATA", /* GPIO_150 */
+ "WLAN_COEX_UART1_RX",
+ "WLAN_COEX_UART1_TX",
+ "HST_SW_CTRL",
+ "DISP_VDDR_EN",
+ "NC",
+ "NC",
+ "PA_INDICATOR_OR",
+ "TOF_RST_N",
+ "QLINK0_REQ",
+ "QLINK0_EN", /* GPIO_160 */
+ "QLINK0_WMSS_RESET_N",
+ "QLINK1_REQ",
+ "QLINK1_EN",
+ "QLINK1_WMSS_RESET_N",
+ "PM8008_2_IRQ",
+ "TELEC_PWR_EN",
+ "PM8008_2_RESET_N",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1", /* GPIO_170 */
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0",
+ "WCD_SWR_RX_DATA1",
+ "SM_DMIC1_CLK",
+ "SM_DMIC1_DATA",
+ "SM_DMIC2_CLK",
+ "SM_DMIC2_DATA",
+ "SPK_AMP_I2S_CLK",
+ "SPK_AMP_I2S_WS",
+ "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+ "SPK_AMP_I2S_ASP_DOUT",
+ "WCD_SWR_TX_DATA2",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "IMU_SPI_MISO",
+ "IMU_SPI_MOSI",
+ "IMU_SPI_CLK",
+ "IMU_SPI_CS_N", /* GPIO_190 */
+ "MAG_I2C_SDA",
+ "MAG_I2C_SCL",
+ "SENSOR_I2C_SDA",
+ "SENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HST_BLE_UART_TX",
+ "HST_BLE_UART_RX", /* GPIO_200 */
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
+};