diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx224.dts')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx224.dts | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx224.dts b/dts/upstream/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx224.dts new file mode 100644 index 00000000000..dc4de2d3fe4 --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sm8450-sony-xperia-nagara-pdx224.dts @@ -0,0 +1,268 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include "sm8450-sony-xperia-nagara.dtsi" + +/ { + model = "Sony Xperia 5 IV"; + compatible = "sony,pdx224", "qcom,sm8450"; + + imx563_vdig_regulator: imx563-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "imx563_vdig_regulator"; + gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&uwidec_pwr_en>; + }; +}; + +&pm8350b_gpios { + gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */ + "NC", + "NC", + "NC", + "SNAPSHOT_N", + "NC", + "NC", + "FOCUS_N"; +}; + +&pm8350c_gpios { + gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */ + "FL_STROBE_TRIG_TELE", + "WLC_ID", + "WLC_TXPWR_EN", + "NC", + "NC", /* RGBCIR uses a PMIC vreg, so it's most likely NC. */ + "NC", + "NC", + "WIDEC_PWR_EN"; +}; + +&tlmm { + gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */ + "TELE_SPI_MOSI", /* SONY says NC, but it only makes sense this way.. */ + "TELE_SPI_CLK", + "TELE_SPI_CS_N", + "WLC_I2C_SDA", + "WLC_I2C_SCL", + "NC", + "PM8010_1_RESET_N", + "WLC_INT_N", + "NC", + "NC", /* GPIO_10 */ + "NC", + "DISP_ERR_FG", + "HALL_INT_N", + "ALS_PROX_INT_N", + "IMU1_INT", + "TS_I2C_SDA", + "TS_I2C_SCL", + "DISP_RESET_N", + "DISP_VDDR_EN", + "TS_RESET_N", /* GPIO_20 */ + "TS_INT_N", + "UWIDEC_PWR_EN", + "TELEC_PWR_EN", + "CAM1_RESET_N", + "LEO_CAM0_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", /* GPIO_30 */ + "FP_SPI_CS_N", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_CLK", + "NFC_ESE_SPI_CS", + "FP_INT_N", /* GPIO_40 */ + "NC", + "FP_RESET_N", + "WCD_RST_N", + "NC", + "NFC_DWL_REQ", + "NFC_IRQ", + "FORCE_USB_BOOT", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "SBU_SW_OE", /* GPIO_50 */ + "SBU_SW_SEL", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "GNSS_ELNA_EN0", + "NC", + "NC", /* GPIO_60 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "RGBC_IR_INT", + "NC", + "NC", + "NC", + "NC", /* GPIO_70 */ + "NC", + "HAP_I2C_SDA", + "HAP_I2C_SCL", + "HAP_RST_N", + "HAP_INT_N", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_80 */ + "HST_BT_EN", + "HST_SW_CTRL", + "NC", + "NC", + "NC", + "DISP_VSYNC", + "NC", + "NC", + "HW_ID_0", + "HW_ID_1", /* GPIO_90 */ + "USB_CC_DIR", + "TRAY_DET", + "SW_SERVICE", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "OIS_ENABLE_WIDE", + "DEBUG_GPIO0", + "NC", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "NC", + "NC", + "NC", /* SONY didn't rename this, but there's no ToF so it's likely NC */ + "CAM_SOF", + "NC", + "AFEXPTMG_TELE", + "CCI_I2C0_SDA", /* GPIO_110 */ + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "NC", + "CAM2_RESET_N", + "NC", + "EXT_VD0_XVS", + "CAM3_RESET_N", /* GPIO_120 */ + "NC", + "NC", + "NC", + "NC", + "RF_ID_EXTENSION_2", + "HAP_I2S_CLK", + "HAP_I2S_DOUT", + "HAP_TRG1", + "HAP_I2S_SYNC", + "UIM1_DATA", /* GPIO_130 */ + "UIM1_CLK", + "UIM1_RESET", + "TRAY_DET", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "SM_RFFE0_CLK", + "SM_RFFE0_DATA", + "SM_RFFE1_CLK", /* GPIO_140 */ + "SM_RFFE1_DATA", + "SM_MSS_GRFC4", + "HST_AS_EN", + "LAA_RX_EN", + "NC", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "RF_LCD_ID_EN", /* GPIO_150 */ + "RF_ID_EXTENSION", + "SM_MSS_GRFC12", + "NFC_COLD_RST", + "NC", + "NC", + "SDR1_QLINK0_REQ", + "SDR1_QLINK0_EN", + "SDR1_QLINK0_WMSS_RESET_N", + "NC", + "NC", /* GPIO_160 */ + "NC", + "SDR2_QLINK2_REQ", + "SDR2_QLINK2_EN", + "SDR2_QLINK2_WMSS_RESET_N", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", /* GPIO_170 */ + "SM_DMIC1_CLK", + "SM_DMIC1_DATA", + "SM_DMIC2_CLK", + "SM_DMIC2_DATA", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "NC", + "NC", + "WCD_SWR_TX_DATA2", + "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */ + "SPK_AMP_I2S_ASP_DOUT", + "SPK_AMP_INT_N", + "SPK_AMP_RESET_N", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", + "NC", + "NC", + "NC", + "NC", + "MAG_I2C_SDA", /* GPIO_190 */ + "MAG_I2C_SCL", + "IMU_SPI_MISO", + "IMU_SPI_MOSI", + "IMU_SPI_CLK", + "IMU_SPI_CS_N", + "SENSOR_I2C_SDA", + "SENSOR_I2C_SCL", + "OIS_TELE_I2C_SDA", + "OIS_TELE_I2C_SCL", + "NC", /* GPIO_200 */ + "OIS_ENABLE_TELE", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", + "HSTP_CLK_CFG_SEL", + "NC", + "APPS_I2C_0_SDA", + "APPS_I2C_0_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL"; + + uwidec_pwr_en: uwidec-pwr-en-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; +}; |