diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/sm8450.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/sm8450.dtsi | 97 |
1 files changed, 73 insertions, 24 deletions
diff --git a/dts/upstream/src/arm64/qcom/sm8450.dtsi b/dts/upstream/src/arm64/qcom/sm8450.dtsi index 01e4dfc4bab..024d2653cc3 100644 --- a/dts/upstream/src/arm64/qcom/sm8450.dtsi +++ b/dts/upstream/src/arm64/qcom/sm8450.dtsi @@ -1028,6 +1028,12 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart20_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1420,6 +1426,12 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; }; @@ -1765,15 +1777,25 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; - /* - * MSIs for BDF (1:0.0) only works with Device ID 0x5980. - * Hence, the IDs are swapped. - */ - msi-map = <0x0 &gic_its 0x5981 0x1>, - <0x100 &gic_its 0x5980 0x1>; + msi-map = <0x0 &gic_its 0x5980 0x1>, + <0x100 &gic_its 0x5981 0x1>; msi-map-mask = <0xff00>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1874,15 +1896,25 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - /* - * MSIs for BDF (1:0.0) only works with Device ID 0x5a00. - * Hence, the IDs are swapped. - */ - msi-map = <0x0 &gic_its 0x5a01 0x1>, - <0x100 &gic_its 0x5a00 0x1>; + msi-map = <0x0 &gic_its 0x5a00 0x1>, + <0x100 &gic_its 0x5a01 0x1>; msi-map-mask = <0xff00>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2038,6 +2070,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; status = "disabled"; @@ -3934,7 +3967,7 @@ }; }; - dmic02_default: dmic02-default-state { + dmic23_default: dmic23-default-state { clk-pins { pins = "gpio8"; function = "dmic2_clk"; @@ -4485,13 +4518,15 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -4890,6 +4925,13 @@ polling-delay = <0>; thermal-sensors = <&tsens0 14>; + cooling-maps { + map0 { + trip = <&gpu_top_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -4909,7 +4951,7 @@ type = "passive"; }; - gpu0_tj_cfg: tj-cfg { + gpu_top_alert0: trip-point0 { temperature = <95000>; hysteresis = <5000>; type = "passive"; @@ -4922,6 +4964,13 @@ polling-delay = <0>; thermal-sensors = <&tsens0 15>; + cooling-maps { + map0 { + trip = <&gpu_bottom_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { thermal-engine-config { temperature = <125000>; @@ -4941,7 +4990,7 @@ type = "passive"; }; - gpu1_tj_cfg: tj-cfg { + gpu_bottom_alert0: trip-point0 { temperature = <95000>; hysteresis = <5000>; type = "passive"; |