diff options
Diffstat (limited to 'dts/upstream/src/arm64/renesas/draak.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/renesas/draak.dtsi | 748 |
1 files changed, 748 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/renesas/draak.dtsi b/dts/upstream/src/arm64/renesas/draak.dtsi new file mode 100644 index 00000000000..6f133f54ded --- /dev/null +++ b/dts/upstream/src/arm64/renesas/draak.dtsi @@ -0,0 +1,748 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Draak board + * + * Copyright (C) 2016-2018 Renesas Electronics Corp. + * Copyright (C) 2017 Glider bvba + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Renesas Draak board"; + compatible = "renesas,draak"; + + aliases { + serial0 = &scif2; + ethernet0 = &avb; + }; + + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; + + brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; + default-brightness-level = <10>; + + power-supply = <®_12p0v>; + enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + + composite-in { + compatible = "composite-video-connector"; + + port { + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW56-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW56-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW56-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW56-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x18000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_12p0v: regulator-12p0v { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + sound_card: sound { + compatible = "audio-graph-card"; + + dais = <&rsnd_port0 /* ak4613 */ + /* HDMI is not yet supported */ + >; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x19_clk: x19 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&audio_clk_b { + /* + * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB, + * and R-Car Sound uses AUDIO_CLKB. + * Note is that schematic indicates VI4_FIELD conection only + * not AUDIO_CLKB at SoC page. + * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60. + * SW60 should be 1-2. + */ + + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Draak board, however, TX clock internal delay mode + * isn't supported on R-Car D3(e). Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; + }; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x12_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + du_out_rgb: endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; + +&ehci0 { + dr_mode = "host"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <48000000>; +}; + +&hsusb { + dr_mode = "host"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 0>; /* audio_clkout */ + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_for_ak4613>; + }; + }; + }; + + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * HDMI is the default selection, leave CVBS + * not connected here. + */ + }; + }; + + }; + + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>, <0x3f>, <0x3c>, <0x38>; + reg-names = "main", "edid", "cec", "packet"; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-decoder@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * HDMI is the default selection, link it to + * VIN4 here. + */ + adv7612_out: endpoint { + remote-endpoint = <&vin4_in>; + }; + }; + }; + }; + + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */ + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + +&ohci0 { + dr_mode = "host"; + status = "okay"; +}; + +&pfc { + avb0_pins: avb { + groups = "avb0_link", "avb0_mdio", "avb0_mii"; + function = "avb0"; + }; + + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data_a"; + function = "can1"; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + keys_pins: keys { + pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15"; + bias-pull-up; + }; + + pwm0_pins: pwm0 { + groups = "pwm0_c"; + function = "pwm0"; + }; + + pwm1_pins: pwm1 { + groups = "pwm1_c"; + function = "pwm1"; + }; + + rpc_pins: rpc { + groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset", + "rpc_int"; + function = "rpc"; + }; + + scif2_pins: scif2 { + groups = "scif2_data"; + function = "scif2"; + }; + + sdhi2_pins: sd2 { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clk_a", "audio_clk_b", + "audio_clkout", "audio_clkout1"; + function = "audio_clk"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + vin4_pins: vin4 { + groups = "vin4_data24", "vin4_sync", "vin4_clk"; + function = "vin4"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm1 { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + status = "okay"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&cs2000>, <&audio_clk_b>, + <&cpg CPG_CORE R8A77995_CLK_ZA2>; + + ports { + rsnd_port0: port { + rsnd_for_ak4613: endpoint { + remote-endpoint = <&ak4613_endpoint>; + dai-format = "left_j"; + bitclock-master = <&rsnd_for_ak4613>; + frame-master = <&rsnd_for_ak4613>; + playback = <&ssi3>, <&src5>, <&dvc0>; + capture = <&ssi4>, <&src6>, <&dvc1>; + }; + }; + }; +}; + +&rpc { + pinctrl-0 = <&rpc_pins>; + pinctrl-names = "default"; + + /* Left disabled. To be enabled by firmware when unlocked. */ + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi2 { + /* used for on-board eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&ssi4 { + shared-pin; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + renesas,no-otg-pins; + status = "okay"; +}; + +&vin4 { + pinctrl-0 = <&vin4_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port { + vin4_in: endpoint { + pclk-sample = <0>; + hsync-active = <0>; + vsync-active = <0>; + remote-endpoint = <&adv7612_out>; + }; + }; + }; +}; |