diff options
Diffstat (limited to 'dts/upstream/src/arm64/rockchip/px30-engicam-common.dtsi')
-rw-r--r-- | dts/upstream/src/arm64/rockchip/px30-engicam-common.dtsi | 130 |
1 files changed, 130 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/rockchip/px30-engicam-common.dtsi b/dts/upstream/src/arm64/rockchip/px30-engicam-common.dtsi new file mode 100644 index 00000000000..5b4e2238516 --- /dev/null +++ b/dts/upstream/src/arm64/rockchip/px30-engicam-common.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/ { + aliases { + ethernet0 = &gmac; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; /* +5V */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&xin32k>; + clock-names = "ext_clock"; + post-power-on-delay-ms = <80>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + }; + + vcc3v3_btreg: vcc3v3-btreg { + compatible = "regulator-gpio"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&bt_enable_h>; + regulator-name = "btreg-gpio-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + states = <3300000 0x0>; + }; + + vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_rf_aux_mod"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + xin32k: xin32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_3v3>; /* +3V3_SOM */ + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&sdmmc { + cap-sd-highspeed; + card-detect-delay = <800>; + vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */ + vqmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2m1_xfer>; + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; |