diff options
Diffstat (limited to 'include/configs/ads5121.h')
| -rw-r--r-- | include/configs/ads5121.h | 242 |
1 files changed, 121 insertions, 121 deletions
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index d6f7e02bc86..bb3525f1751 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -59,31 +59,31 @@ /* CONFIG_PCI is defined at config time */ #ifdef CONFIG_ADS5121_REV2 -#define CFG_MPC512X_CLKIN 66000000 /* in Hz */ +#define CONFIG_SYS_MPC512X_CLKIN 66000000 /* in Hz */ #else -#define CFG_MPC512X_CLKIN 33333333 /* in Hz */ +#define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ #define CONFIG_PCI #endif #define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R -#define CFG_IMMR 0x80000000 -#define CFG_DIU_ADDR (CFG_IMMR+0x2100) +#define CONFIG_SYS_IMMR 0x80000000 +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100) -#define CFG_MEMTEST_START 0x00200000 /* memtest region */ -#define CFG_MEMTEST_END 0x00400000 +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 /* * DDR Setup - manually set all parameters as there's no SPD etc. */ #ifdef CONFIG_ADS5121_REV2 -#define CFG_DDR_SIZE 256 /* MB */ +#define CONFIG_SYS_DDR_SIZE 256 /* MB */ #else -#define CFG_DDR_SIZE 512 /* MB */ +#define CONFIG_SYS_DDR_SIZE 512 /* MB */ #endif -#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE /* DDR Controller Configuration * @@ -130,102 +130,102 @@ * [04:00] DRAM tRPA */ #ifdef CONFIG_ADS5121_REV2 -#define CFG_MDDRC_SYS_CFG 0xF8604A00 -#define CFG_MDDRC_SYS_CFG_RUN 0xE8604A00 -#define CFG_MDDRC_TIME_CFG1 0x54EC1168 -#define CFG_MDDRC_TIME_CFG2 0x35210864 +#define CONFIG_SYS_MDDRC_SYS_CFG 0xF8604A00 +#define CONFIG_SYS_MDDRC_SYS_CFG_RUN 0xE8604A00 +#define CONFIG_SYS_MDDRC_TIME_CFG1 0x54EC1168 +#define CONFIG_SYS_MDDRC_TIME_CFG2 0x35210864 #else -#define CFG_MDDRC_SYS_CFG 0xFA804A00 -#define CFG_MDDRC_SYS_CFG_RUN 0xEA804A00 -#define CFG_MDDRC_TIME_CFG1 0x68EC1168 -#define CFG_MDDRC_TIME_CFG2 0x34310864 +#define CONFIG_SYS_MDDRC_SYS_CFG 0xFA804A00 +#define CONFIG_SYS_MDDRC_SYS_CFG_RUN 0xEA804A00 +#define CONFIG_SYS_MDDRC_TIME_CFG1 0x68EC1168 +#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34310864 #endif -#define CFG_MDDRC_SYS_CFG_EN 0xF0000000 -#define CFG_MDDRC_TIME_CFG0 0x00003D2E -#define CFG_MDDRC_TIME_CFG0_RUN 0x06183D2E - -#define CFG_MICRON_NOP 0x01380000 -#define CFG_MICRON_PCHG_ALL 0x01100400 -#define CFG_MICRON_EM2 0x01020000 -#define CFG_MICRON_EM3 0x01030000 -#define CFG_MICRON_EN_DLL 0x01010000 -#define CFG_MICRON_RFSH 0x01080000 -#define CFG_MICRON_INIT_DEV_OP 0x01000432 -#define CFG_MICRON_OCD_DEFAULT 0x01010780 +#define CONFIG_SYS_MDDRC_SYS_CFG_EN 0xF0000000 +#define CONFIG_SYS_MDDRC_TIME_CFG0 0x00003D2E +#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x06183D2E + +#define CONFIG_SYS_MICRON_NOP 0x01380000 +#define CONFIG_SYS_MICRON_PCHG_ALL 0x01100400 +#define CONFIG_SYS_MICRON_EM2 0x01020000 +#define CONFIG_SYS_MICRON_EM3 0x01030000 +#define CONFIG_SYS_MICRON_EN_DLL 0x01010000 +#define CONFIG_SYS_MICRON_RFSH 0x01080000 +#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 +#define CONFIG_SYS_MICRON_OCD_DEFAULT 0x01010780 /* DDR Priority Manager Configuration */ -#define CFG_MDDRCGRP_PM_CFG1 0x00077777 -#define CFG_MDDRCGRP_PM_CFG2 0x00000000 -#define CFG_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CFG_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CFG_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CFG_MDDRCGRP_LUT1_MU 0x66666666 -#define CFG_MDDRCGRP_LUT1_ML 0x55555555 -#define CFG_MDDRCGRP_LUT2_MU 0x44444444 -#define CFG_MDDRCGRP_LUT2_ML 0x44444444 -#define CFG_MDDRCGRP_LUT3_MU 0x55555555 -#define CFG_MDDRCGRP_LUT3_ML 0x55555558 -#define CFG_MDDRCGRP_LUT4_MU 0x11111111 -#define CFG_MDDRCGRP_LUT4_ML 0x11111122 -#define CFG_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CFG_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CFG_MDDRCGRP_LUT1_AU 0x66666666 -#define CFG_MDDRCGRP_LUT1_AL 0x66666666 -#define CFG_MDDRCGRP_LUT2_AU 0x11111111 -#define CFG_MDDRCGRP_LUT2_AL 0x11111111 -#define CFG_MDDRCGRP_LUT3_AU 0x11111111 -#define CFG_MDDRCGRP_LUT3_AL 0x11111111 -#define CFG_MDDRCGRP_LUT4_AU 0x11111111 -#define CFG_MDDRCGRP_LUT4_AL 0x11111111 +#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 +#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 +#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 +#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC +#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA +#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 +#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 +#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 +#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 +#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 +#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 +#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 +#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa +#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa +#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 +#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 +#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 /* * NOR FLASH on the Local Bus */ #undef CONFIG_BKUP_FLASH -#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ #ifdef CONFIG_BKUP_FLASH -#define CFG_FLASH_BASE 0xFF800000 /* start of FLASH */ -#define CFG_FLASH_SIZE 0x00800000 /* max flash size in bytes */ +#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* max flash size in bytes */ #else -#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH */ -#define CFG_FLASH_SIZE 0x04000000 /* max flash size in bytes */ +#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* max flash size in bytes */ #endif -#define CFG_FLASH_USE_BUFFER_WRITE -#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ -#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} -#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ -#undef CFG_FLASH_CHECKSUM +#undef CONFIG_SYS_FLASH_CHECKSUM /* * CPLD registers area is really only 32 bytes in size, but the smallest possible LP * window is 64KB */ -#define CFG_CPLD_BASE 0x82000000 -#define CFG_CPLD_SIZE 0x00010000 /* 64 KB */ +#define CONFIG_SYS_CPLD_BASE 0x82000000 +#define CONFIG_SYS_CPLD_SIZE 0x00010000 /* 64 KB */ -#define CFG_SRAM_BASE 0x30000000 -#define CFG_SRAM_SIZE 0x00020000 /* 128 KB */ +#define CONFIG_SYS_SRAM_BASE 0x30000000 +#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ -#define CFG_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ -#define CFG_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ -#define CFG_CS_ALETIMING 0x00000005 /* Use alternative CS timing for CS0 and CS2 */ +#define CONFIG_SYS_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ +#define CONFIG_SYS_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ +#define CONFIG_SYS_CS_ALETIMING 0x00000005 /* Use alternative CS timing for CS0 and CS2 */ /* Use SRAM for initial stack */ -#define CFG_INIT_RAM_ADDR CFG_SRAM_BASE /* Initial RAM address */ -#define CFG_INIT_RAM_END CFG_SRAM_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CFG_MONITOR_BASE TEXT_BASE /* Start of monitor */ -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ #ifdef CONFIG_FSL_DIU_FB -#define CFG_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ +#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ #else -#define CFG_MALLOC_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) #endif /* @@ -242,7 +242,7 @@ #error CONFIG_PSC_CONSOLE must be 3 #endif #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CFG_BAUDRATE_TABLE \ +#define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} #define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE @@ -252,9 +252,9 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ /* Use the HUSH parser */ -#define CFG_HUSH_PARSER -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif /* @@ -265,15 +265,15 @@ /* * General PCI */ -#define CFG_PCI_MEM_BASE 0xA0000000 -#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE -#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */ -#define CFG_PCI_MMIO_BASE (CFG_PCI_MEM_BASE + CFG_PCI_MEM_SIZE) -#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE -#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */ -#define CFG_PCI_IO_BASE 0x00000000 -#define CFG_PCI_IO_PHYS 0x84000000 -#define CFG_PCI_IO_SIZE 0x01000000 /* 16M */ +#define CONFIG_SYS_PCI_MEM_BASE 0xA0000000 +#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE +#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI_MMIO_BASE (CONFIG_SYS_PCI_MEM_BASE + CONFIG_SYS_PCI_MEM_SIZE) +#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE +#define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI_IO_PHYS 0x84000000 +#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16M */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -287,19 +287,19 @@ #undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */ #define CONFIG_I2C_MULTI_BUS #define CONFIG_I2C_CMD_TREE -#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F #if 0 -#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ +#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #endif /* * EEPROM configuration */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */ -#define CFG_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */ -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */ -#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */ /* * Ethernet configuration @@ -315,14 +315,14 @@ * Configure on-board RTC */ #define CONFIG_RTC_M41T62 /* use M41T62 rtc via i2 */ -#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ /* * Environment */ #define CONFIG_ENV_IS_IN_FLASH 1 /* This has to be a multiple of the Flash sector size */ -#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_SIZE 0x2000 #ifdef CONFIG_BKUP_FLASH #define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (256K) for env */ @@ -335,7 +335,7 @@ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ #include <config_cmd_default.h> @@ -354,50 +354,50 @@ #endif /* - * Watchdog timeout = CFG_WATCHDOG_VALUE * 65536 / IPS clock. - * For example, when IPS is set to 66MHz and CFG_WATCHDOG_VALUE is set + * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. + * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set * to 0xFFFF, watchdog timeouts after about 64s. For details refer * to chapter 36 of the MPC5121e Reference Manual. */ /* #define CONFIG_WATCHDOG */ /* enable watchdog */ -#define CFG_WATCHDOG_VALUE 0xFFFF +#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_LOAD_ADDR 0x2000000 /* default load address */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB - #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ + #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else - #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ + #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ /* Cache Configuration */ -#define CFG_DCACHE_SIZE 32768 -#define CFG_CACHELINE_SIZE 32 +#define CONFIG_SYS_DCACHE_SIZE 32768 +#define CONFIG_SYS_CACHELINE_SIZE 32 #ifdef CONFIG_CMD_KGDB -#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#define CONFIG_SYS_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif -#define CFG_HID0_INIT 0x000000000 -#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK -#define CFG_HID2 HID2_HBE +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CONFIG_SYS_HID2 HID2_HBE #define CONFIG_HIGH_BATS 1 /* High BATs supported */ |