diff options
Diffstat (limited to 'include/configs/bf609-ezkit.h')
| -rw-r--r-- | include/configs/bf609-ezkit.h | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h new file mode 100644 index 00000000000..02149fa94df --- /dev/null +++ b/include/configs/bf609-ezkit.h @@ -0,0 +1,162 @@ +/* + * U-boot - Configuration file for BF609 EZ-Kit board + */ + +#ifndef __CONFIG_BF609_EZKIT_H__ +#define __CONFIG_BF609_EZKIT_H__ + +#include <asm/config-pre.h> + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf609-0.0 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA + + +/* For ez-board version 1.0, else undef this */ +#define CONFIG_BFIN_BOARD_VERSION_1_0 + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV + * SCLK0 = SCLK / SCLK0_DIV + * SCLK1 = SCLK / SCLK1_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ (25000000) +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF (0) + +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-127 (where 0 means 128) */ +#define CONFIG_VCO_MULT (20) + +/* CCLK_DIV controls the core clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_CCLK_DIV (1) +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_SCLK_DIV (4) +/* Values can range from 0-7 (where 0 means 8) */ +#define CONFIG_SCLK0_DIV (1) +#define CONFIG_SCLK1_DIV (1) +/* DCLK_DIV controls the DDR clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_DCLK_DIV (2) +/* OCLK_DIV controls the output clock divider */ +/* Values can range from 0-127 (where 0 means 128) */ +#define CONFIG_OCLK_DIV (16) + +/* + * Memory Settings + */ +#define CONFIG_MEM_SIZE 128 + +#define CONFIG_SMC_GCTL_VAL 0x00000010 +#define CONFIG_SMC_B0CTL_VAL 0x01007011 +#define CONFIG_SMC_B0TIM_VAL 0x08170977 +#define CONFIG_SMC_B0ETIM_VAL 0x00092231 + +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) + +#define CONFIG_HW_WATCHDOG +/* + * Network Settings + */ +#define ADI_CMDS_NETWORK +#define CONFIG_NETCONSOLE +#define CONFIG_NET_MULTI +#define CONFIG_HOSTNAME "bf609-ezkit" +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_PORTS 1 +#define CONFIG_DW_AUTONEG +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_MII + +/* i2c Settings */ +#define CONFIG_BFIN_TWI_I2C +#define CONFIG_HARD_I2C + +/* + * Flash Settings + */ +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_JFFS2 +#define CONFIG_SYS_FLASH_CFI_WIDTH 2 +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_BASE 0xb0000000 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 131 +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI6XX +#define CONFIG_ENV_SPI_MAX_HZ 25000000 +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ALL + +/* + * Env Storage Settings + */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x10000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_SIZE 0x20000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_SECT_SIZE 0x8000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#endif + +#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0" + +/* + * SDH Settings + */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_BFIN_SDH + +/* + * Misc Settings + */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_UART_CONSOLE 0 + +#define CONFIG_CMD_MEMORY + +#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) +#define CONFIG_BFIN_SOFT_SWITCH + +#if 0 +#define CONFIG_UART_MEM 1024 +#undef CONFIG_UART_CONSOLE +#undef CONFIG_JTAG_CONSOLE +#undef CONFIG_UART_CONSOLE_IS_JTAG +#endif + +/* + * Pull in common ADI header for remaining command/environment setup + */ +#include <configs/bfin_adi_common.h> +#endif |