diff options
Diffstat (limited to 'include/configs/j721e_evm.h')
| -rw-r--r-- | include/configs/j721e_evm.h | 134 |
1 files changed, 0 insertions, 134 deletions
diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index 48b1cea6e39..de92cd48fb7 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -10,10 +10,6 @@ #define __CONFIG_J721E_EVM_H #include <linux/sizes.h> -#include <environment/ti/mmc.h> -#include <environment/ti/k3_rproc.h> -#include <environment/ti/ufs.h> -#include <environment/ti/k3_dfu.h> /* DDR Configuration */ #define CFG_SYS_SDRAM_BASE1 0x880000000 @@ -28,127 +24,6 @@ #define CFG_SYS_UBOOT_BASE 0x50080000 #endif -/* HyperFlash related configuration */ - -/* U-Boot general configuration */ -#define EXTRA_ENV_J721E_BOARD_SETTINGS \ - "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ - "findfdt=" \ - "setenv name_fdt ${default_device_tree};" \ - "if test $board_name = j721e; then " \ - "setenv name_fdt k3-j721e-common-proc-board.dtb; fi;" \ - "if test $board_name = j721e-eaik || test $board_name = j721e-sk; then " \ - "setenv name_fdt k3-j721e-sk.dtb; fi;" \ - "setenv fdtfile ${name_fdt}\0" \ - "name_kern=Image\0" \ - "console=ttyS2,115200n8\0" \ - "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \ - "${mtdparts}\0" \ - "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" - -#define PARTS_DEFAULT \ - /* Linux partitions */ \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" - -#ifdef CONFIG_SYS_K3_SPL_ATF -#if defined(CONFIG_TARGET_J721E_R5_EVM) -#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \ - "addr_mcur5f0_0load=0x89000000\0" \ - "name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0" -#elif defined(CONFIG_TARGET_J7200_R5_EVM) -#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \ - "addr_mcur5f0_0load=0x89000000\0" \ - "name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0" -#endif /* CONFIG_TARGET_J721E_R5_EVM */ -#else -#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC "" -#endif /* CONFIG_SYS_K3_SPL_ATF */ - -/* U-Boot MMC-specific configuration */ -#define EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \ - "boot=mmc\0" \ - "mmcdev=1\0" \ - "bootpart=1:2\0" \ - "bootdir=/boot\0" \ - EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \ - "rd_spec=-\0" \ - "init_mmc=run args_all args_mmc\0" \ - "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \ - "get_overlay_mmc=" \ - "fdt address ${fdtaddr};" \ - "fdt resize 0x100000;" \ - "for overlay in $name_overlays;" \ - "do;" \ - "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && " \ - "fdt apply ${dtboaddr};" \ - "done;\0" \ - "partitions=" PARTS_DEFAULT \ - "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \ - "${bootdir}/${name_kern}\0" \ - "get_fit_mmc=load mmc ${bootpart} ${addr_fit} " \ - "${bootdir}/${name_fit}\0" \ - "partitions=" PARTS_DEFAULT - -/* Set the default list of remote processors to boot */ -#if defined(CONFIG_TARGET_J7200_A72_EVM) -#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \ - "do_main_cpsw0_qsgmii_phyinit=1\0" \ - "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;" \ - "gpio clear gpio@22_16\0" \ - "main_cpsw0_qsgmii_phyinit=" \ - "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \ - "test ${boot} = mmc; then " \ - "run init_main_cpsw0_qsgmii_phy;" \ - "fi;\0" -#ifdef DEFAULT_RPROCS -#undef DEFAULT_RPROCS -#endif -#elif defined(CONFIG_TARGET_J721E_A72_EVM) -#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \ - "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;" \ - "gpio clear gpio@22_16\0" \ - "main_cpsw0_qsgmii_phyinit=" \ - "if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM " \ - "|| test $board_name = j721e; then " \ - "do_main_cpsw0_qsgmii_phyinit=1; else " \ - "do_main_cpsw0_qsgmii_phyinit=0; fi;" \ - "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \ - "test ${boot} = mmc; then " \ - "run init_main_cpsw0_qsgmii_phy;" \ - "fi;\0" -#ifdef DEFAULT_RPROCS -#undef DEFAULT_RPROCS -#endif -#endif - -#ifdef CONFIG_TARGET_J721E_A72_EVM -#define DEFAULT_RPROCS "" \ - "2 /lib/firmware/j7-main-r5f0_0-fw " \ - "3 /lib/firmware/j7-main-r5f0_1-fw " \ - "4 /lib/firmware/j7-main-r5f1_0-fw " \ - "5 /lib/firmware/j7-main-r5f1_1-fw " \ - "6 /lib/firmware/j7-c66_0-fw " \ - "7 /lib/firmware/j7-c66_1-fw " \ - "8 /lib/firmware/j7-c71_0-fw " -#endif /* CONFIG_TARGET_J721E_A72_EVM */ - -#ifdef CONFIG_TARGET_J7200_A72_EVM -#define DEFAULT_RPROCS "" \ - "2 /lib/firmware/j7200-main-r5f0_0-fw " \ - "3 /lib/firmware/j7200-main-r5f0_1-fw " -#endif /* CONFIG_TARGET_J7200_A72_EVM */ - -#ifndef EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY -#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY -#endif - -#define EXTRA_ENV_DFUARGS \ - DFU_ALT_INFO_MMC \ - DFU_ALT_INFO_EMMC \ - DFU_ALT_INFO_RAM \ - DFU_ALT_INFO_OSPI - #if CONFIG_IS_ENABLED(CMD_PXE) # define BOOT_TARGET_PXE(func) func(PXE, pxe, na) #else @@ -178,15 +53,6 @@ /* Incorporate settings into the U-Boot environment */ #define CFG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - DEFAULT_FIT_TI_ARGS \ - EXTRA_ENV_J721E_BOARD_SETTINGS \ - EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \ - EXTRA_ENV_RPROC_SETTINGS \ - EXTRA_ENV_DFUARGS \ - DEFAULT_UFS_TI_ARGS \ - EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \ BOOTENV /* Now for the remaining common defines */ |