diff options
Diffstat (limited to 'include/configs/o2d300.h')
| -rw-r--r-- | include/configs/o2d300.h | 81 |
1 files changed, 0 insertions, 81 deletions
diff --git a/include/configs/o2d300.h b/include/configs/o2d300.h deleted file mode 100644 index a8222d9f97e..00000000000 --- a/include/configs/o2d300.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* - * GPIO configuration: - * CS1 SDRAM activate + no CAN + no PCI - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 -#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ - -/* Use redundant environment */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_BOARD_NAME "o2d300" -#define CONFIG_BOARD_BOOTCMD "run dhcp_boot" -#define CONFIG_BOARD_MEM_LIMIT __stringify(126) -#define BOARD_POST_CRC32_END __stringify(0x02000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "autoload=no\0" \ - "dhcp_boot=run dhcpcmd;run flash_mtd\0" \ - "flash_mtd=run mtd_args addip addmem;" \ - "bootm ${kernel_addr}\0" \ - "mtd_args=setenv bootargs root=/dev/mtdblock4 " \ - "rw rootfstype=cramfs\0" \ - "linbot=fc080000\0" \ - "lintop=fc17ffff\0" \ - "rambot=fc180000\0" \ - "ramtop=fc57ffff\0" \ - "jffbot=fc580000\0" \ - "jfftop=fd39ffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=fc03ffff\0" \ - "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0" \ - "halbot=fd3a0000\0" \ - "haltop=fdf9ffff\0" \ - "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};" \ - "cp.b ${fileaddr} ${halbot} ${filesize}\0" \ - "kernel_addr=0xfc060000\0" \ - "ramdisk_addr=0xfc160000\0" \ - "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \ - "netretry=once\0" \ - "protcmd=protect on ${linbot} ${lintop};" \ - "protect on ${rambot} ${ramtop}\0" \ - "o2derror=def_env\0" \ - "sensorType=O2D300AA\0" |