diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/pfla02.h | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/include/configs/pfla02.h b/include/configs/pfla02.h deleted file mode 100644 index e96429083ed..00000000000 --- a/include/configs/pfla02.h +++ /dev/null @@ -1,127 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) Stefano Babic <sbabic@denx.de> - */ - - -#ifndef __PCM058_CONFIG_H -#define __PCM058_CONFIG_H - -#ifdef CONFIG_SPL -#include "imx6_spl.h" -#endif - -#include "mx6_common.h" - -/* Serial */ -#define CONFIG_MXC_UART_BASE UART4_BASE -#define CONSOLE_DEV "ttymxc3" - -/* Early setup */ - - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M) - -/* Ethernet */ -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 3 - -/* SPI Flash */ - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 0 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* Enable NAND support */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_ONFI_DETECTION - -/* DMA stuff, needed for GPMI/MXS NAND support */ - -/* Filesystem support */ - -/* Various command support */ - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 2 - -/* Environment organization */ - -/* Default environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console},${baudrate}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off\0" \ - "addmisc=setenv bootargs ${bootargs} ${miscargs}\0" \ - "addmtd=run mtdnand;run mtdspi;" \ - "setenv bootargs ${bootargs} ${mtdparts}\0" \ - "mtdnand=setenv mtdparts mtdparts=gpmi-nand:" \ - "40m(Kernels),400m(root),-(nand)\0" \ - "mtdspi=setenv mtdparts ${mtdparts}" \ - "';spi2.0:1024k(bootloader)," \ - "64k(env1),64k(env2),-(rescue)'\0" \ - "bootcmd=if test -n ${rescue};" \ - "then run swupdate;fi;run nandboot;run swupdate\0" \ - "bootfile=uImage\0" \ - "bootimage=uImage\0" \ - "console=ttymxc3\0" \ - "fdt_addr_r=0x18000000\0" \ - "fdt_file=pfla02.dtb\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "miscargs=panic=1 quiet\0" \ - "mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0" \ - "mmcboot=if run mmcload;then " \ - "run mmcargs addcons addmisc;" \ - "bootm;fi\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\ - "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p1\0" \ - "ubiroot=1\0" \ - "nandargs=setenv bootargs ubi.mtd=1 " \ - "root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0" \ - "nandboot=run mtdnand;ubi part nand0,0;" \ - "ubi readvol ${kernel_addr_r} kernel${ubiroot};" \ - "run nandargs addip addcons addmtd addmisc;" \ - "bootm ${kernel_addr_r}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};" \ - "tftp ${fdt_addr_r} ${board_name}/${fdt_file};" \ - "run nfsargs addip addcons addmtd addmisc;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};" \ - "run nfsargs addip addcons addmtd addmisc;" \ - "bootm ${kernel_addr_r}\0" \ - "nfsargs=setenv bootargs root=/dev/nfs" \ - " nfsroot=${serverip}:${nfsroot},v3 panic=1\0" \ - "swupdate=setenv bootargs root=/dev/ram;" \ - "run addip addcons addmtd addmisc;" \ - "sf probe;" \ - "sf read ${kernel_addr_r} 120000 600000;" \ - "sf read 14000000 730000 800000;" \ - "bootm ${kernel_addr_r} 14000000\0" - -#endif |