diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/VCMA9.h | 7 | ||||
| -rw-r--r-- | include/configs/a320evb.h | 222 | ||||
| -rw-r--r-- | include/configs/da830evm.h | 243 | ||||
| -rw-r--r-- | include/configs/devkit8000.h | 3 | ||||
| -rw-r--r-- | include/configs/imx27lite.h | 1 | ||||
| -rw-r--r-- | include/configs/omap3_beagle.h | 3 | ||||
| -rw-r--r-- | include/configs/omap3_evm.h | 3 | ||||
| -rw-r--r-- | include/configs/omap3_overo.h | 3 | ||||
| -rw-r--r-- | include/configs/omap3_pandora.h | 3 | ||||
| -rw-r--r-- | include/configs/omap3_sdp3430.h | 3 | ||||
| -rw-r--r-- | include/configs/omap3_zoom1.h | 3 | ||||
| -rw-r--r-- | include/configs/omap3_zoom2.h | 3 | ||||
| -rw-r--r-- | include/configs/sbc2410x.h | 7 | ||||
| -rw-r--r-- | include/configs/smdk2400.h | 7 | ||||
| -rw-r--r-- | include/configs/smdk2410.h | 7 | ||||
| -rw-r--r-- | include/configs/smdk6400.h | 2 | ||||
| -rw-r--r-- | include/configs/trab.h | 9 |
17 files changed, 511 insertions, 18 deletions
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 618b7f0a7e0..ebc81c40034 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -33,9 +33,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* VCMA9 has 12MHz input clock */ diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h new file mode 100644 index 00000000000..fcc556321ba --- /dev/null +++ b/include/configs/a320evb.h @@ -0,0 +1,222 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * Configuation settings for the Faraday A320 board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/a320.h> + +/*----------------------------------------------------------------------- + * CPU and Board Configuration Options + */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#undef CONFIG_SKIP_LOWLEVEL_INIT + +/*----------------------------------------------------------------------- + * Timer + */ +#define CONFIG_SYS_HZ 1000 /* timer ticks per second */ + +/*----------------------------------------------------------------------- + * Real Time Clock + */ +#define CONFIG_RTC_FTRTC010 + +/*----------------------------------------------------------------------- + * Serial console configuration + */ + +/* FTUART is a high speed NS 16C550A compatible UART */ +#define CONFIG_BAUDRATE 38400 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_COM1 0x98200000 +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK 18432000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Ethernet + */ +#define CONFIG_NET_MULTI +#define CONFIG_FTMAC100 + +#define CONFIG_BOOTDELAY 3 + +/*----------------------------------------------------------------------- + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_PING + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "A320 # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/*----------------------------------------------------------------------- + * size in bytes reserved for initial data +*/ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/*----------------------------------------------------------------------- + * SDRAM controller configuration + */ +#define CONFIG_SYS_FTSDMC020_TP0 (FTSDMC020_TP0_TRAS(2) | \ + FTSDMC020_TP0_TRP(1) | \ + FTSDMC020_TP0_TRCD(1) | \ + FTSDMC020_TP0_TRF(3) | \ + FTSDMC020_TP0_TWR(1) | \ + FTSDMC020_TP0_TCL(2)) + +#define CONFIG_SYS_FTSDMC020_TP1 (FTSDMC020_TP1_INI_PREC(4) | \ + FTSDMC020_TP1_INI_REFT(8) | \ + FTSDMC020_TP1_REF_INTV(0x180)) + +#define CONFIG_SYS_FTSDMC020_BANK0_BSR (FTSDMC020_BANK_ENABLE | \ + FTSDMC020_BANK_DDW_X16 | \ + FTSDMC020_BANK_DSZ_256M | \ + FTSDMC020_BANK_MBW_32 | \ + FTSDMC020_BANK_SIZE_64M) + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +/* + * Load address and memory test area should agree with + * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself. + */ +#define CONFIG_SYS_LOAD_ADDR 0x12000000 + +/* memtest works on 63 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x13F00000 + +/*----------------------------------------------------------------------- + * Static memory controller configuration + */ + +#include <asm/arch/ftsmc020.h> + +#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ + FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ + FTSMC020_BANK_SIZE_1M | \ + FTSMC020_BANK_MBW_8) + +#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \ + FTSMC020_TPR_AST(3) | \ + FTSMC020_TPR_CTW(3) | \ + FTSMC020_TPR_ATI(0xf) | \ + FTSMC020_TPR_AT2(3) | \ + FTSMC020_TPR_WTC(3) | \ + FTSMC020_TPR_AHT(3) | \ + FTSMC020_TPR_TRNA(0xf)) + +#define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \ + FTSMC020_BANK_BASE(PHYS_FLASH_2) | \ + FTSMC020_BANK_SIZE_32M | \ + FTSMC020_BANK_MBW_32) + +#define FTSMC020_BANK1_TIMING (FTSMC020_TPR_AST(3) | \ + FTSMC020_TPR_CTW(3) | \ + FTSMC020_TPR_ATI(0xf) | \ + FTSMC020_TPR_AT2(3) | \ + FTSMC020_TPR_WTC(3) | \ + FTSMC020_TPR_AHT(3) | \ + FTSMC020_TPR_TRNA(0xf)) + +#define CONFIG_SYS_FTSMC020_CONFIGS { \ + { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ + { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ +} + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* use CFI framework */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER + +/* support JEDEC */ +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_FLASH_LEGACY_512Kx8 + +#define PHYS_FLASH_1 0x00000000 +#define PHYS_FLASH_2 0x00400000 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2, } + +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 + +/* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 + +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 + +#undef CONFIG_SYS_FLASH_EMPTY_INFO + +/* environments */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR 0x00060000 +#define CONFIG_ENV_SIZE 0x20000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h new file mode 100644 index 00000000000..38e2ce1f1c6 --- /dev/null +++ b/include/configs/da830evm.h @@ -0,0 +1,243 @@ +/* + * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com> + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ + +/* + * SoC Configuration + */ +#define CONFIG_MACH_DAVINCI_DA830_EVM +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 /* memtest start addr */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) /* 16MB test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * I2C Configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 25000 /* 100Kbps won't work, H/W bug */ +#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ + +/* + * I2C EEPROM definitions for catalyst 24W256 EEPROM chip + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 + +/* + * Network & Ethernet Configuration + */ +#ifdef CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#endif + +/* + * Flash & Environment + */ +#ifdef CONFIG_USE_NAND +#undef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_CS 3 +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE +#define CONFIG_SYS_CLE_MASK 0x10 +#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define DEF_BOOTM "" +#endif + +#ifdef CONFIG_USE_NOR +#define CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CONFIG_SYS_FLASH_SECT_SZ (64 << 10) /* 64KB */ +#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3) +#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE +#define PHYS_FLASH_SIZE (32 << 20) /* Flash size 32MB */ +#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) +#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ +#define CONFIG_SYS_FLASH_SPL_ACCESS +#endif + +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (16 << 10) +#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_SECT_SIZE 4096 +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_DAVINCI_SPI +#define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE +#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) +#define CONFIG_SF_DEFAULT_SPEED 50000000 +#define CONFIG_SYS_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#endif + + +/* + * U-Boot general configuration + */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#undef CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "DA830-evm > " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* + * Linux Information + */ +#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "" +#define CONFIG_BOOTDELAY 3 + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_EEPROM + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#ifdef CONFIG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_UBI +#define CONFIG_RBTREE +#endif + +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SAVEENV +#endif + +#if !defined(CONFIG_USE_NAND) && \ + !defined(CONFIG_USE_NOR) && \ + !defined(CONFIG_USE_SPIFLASH) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_SIZE (16 << 10) +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_ENV +#endif + +#ifdef CONFIG_USB_DA8XX +#define CONFIG_CMD_USB /* include support for usb */ +#define CONFIG_CMD_STORAGE /* include support for usb */ +#define CONFIG_CMD_FAT /* include support for FAT/storage*/ +#define CONFIG_DOS_PARTITION /* include support for FAT/storage*/ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index bd5037e910d..1011770962c 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -66,6 +66,9 @@ /* Hardware drivers */ +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* DM9000 */ #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 20 diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h index 8ebb0bbee64..e219cccc95b 100644 --- a/include/configs/imx27lite.h +++ b/include/configs/imx27lite.h @@ -156,6 +156,7 @@ #define CONFIG_SYS_NAND_BASE 0xd8000000 #define CONFIG_JFFS2_NAND #define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /* * SD/MMC diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 19a5ec92ece..024b9b83343 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -97,6 +97,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include <config_cmd_default.h> diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index a5514aeb9b4..6709edc8635 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -101,6 +101,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include <config_cmd_default.h> diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index ffb515d3223..0f812a79309 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -89,6 +89,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include <config_cmd_default.h> diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 6f21af3d133..0cafeb81c7a 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -92,6 +92,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include <config_cmd_default.h> diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 229dc5e6441..d91c8ffa84b 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -137,6 +137,9 @@ #define CONFIG_SYS_I2C_BUS_SELECT 1 #define CONFIG_DRIVER_OMAP34XX_I2C 1 +/* DDR - I use Infineon DDR */ +#define CONFIG_OMAP3_INFINEON_DDR 1 + /* OMITTED: single 1 Gbit MT29F1G NAND flash */ /* diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index da4b677f93c..2aef973bced 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -98,6 +98,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include <config_cmd_default.h> diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 32cd6fdb141..5b03fb6987a 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -98,6 +98,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* Status LED */ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED 1 diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h index e6886cf7f6f..025ad0953c2 100644 --- a/include/configs/sbc2410x.h +++ b/include/configs/sbc2410x.h @@ -43,9 +43,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* the SBC2410X has 12MHz input clock */ diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index a1beb65d0ea..fd51219af4c 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -34,9 +34,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T core */ -#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */ -#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */ +#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000 /* SMDK2400 has 12 MHz input clock */ diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index c57751bf90b..f9d1e55186f 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -33,9 +33,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index f6e1221294f..f644cd2cdaa 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -49,8 +49,6 @@ #define CONFIG_ENABLE_MMU #endif -#define CONFIG_MEMORY_UPPER_CODE - #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG diff --git a/include/configs/trab.h b/include/configs/trab.h index 97f30cea750..9827195e8d5 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -40,10 +40,11 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an arm920t CPU */ -#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */ -#define CONFIG_TRAB 1 /* on a TRAB Board */ -#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */ +#define CONFIG_ARM920T 1 /* This is an arm920t CPU */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */ +#define CONFIG_TRAB 1 /* on a TRAB Board */ +#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */ /* automatic software updates (see board/trab/auto_update.c) */ #define CONFIG_AUTO_UPDATE 1 |