diff options
Diffstat (limited to 'include')
118 files changed, 1033 insertions, 291 deletions
diff --git a/include/common.h b/include/common.h index 97c04df588e..d5020c8c45d 100644 --- a/include/common.h +++ b/include/common.h @@ -181,9 +181,6 @@ typedef void (interrupt_handler_t)(void *); typeof(Y) __y = (Y); \ (__x > __y) ? __x : __y; }) -#define MIN(x, y) min(x, y) -#define MAX(x, y) max(x, y) - #define min3(X, Y, Z) \ ({ typeof(X) __x = (X); \ typeof(Y) __y = (Y); \ @@ -198,9 +195,6 @@ typedef void (interrupt_handler_t)(void *); __x > __y ? (__x > __z ? __x : __z) : \ (__y > __z ? __y : __z); }) -#define MIN3(x, y, z) min3(x, y, z) -#define MAX3(x, y, z) max3(x, y, z) - /* * Return the absolute value of a number. * diff --git a/include/compiler.h b/include/compiler.h index 9afc11be194..14519163a32 100644 --- a/include/compiler.h +++ b/include/compiler.h @@ -129,9 +129,6 @@ typedef unsigned long int uintptr_t; #endif /* USE_HOSTCC */ -/* compiler options */ -#define uninitialized_var(x) x = x - #define likely(x) __builtin_expect(!!(x), 1) #define unlikely(x) __builtin_expect(!!(x), 0) diff --git a/include/config_cmd_defaults.h b/include/config_cmd_defaults.h deleted file mode 100644 index a55b268b9b3..00000000000 --- a/include/config_cmd_defaults.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * config_cmd_defaults.h - sane defaults for everyone - * - * Copyright (c) 2010-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef _CONFIG_CMD_DEFAULTS_H_ -#define _CONFIG_CMD_DEFAULTS_H_ - -#define CONFIG_CMD_BOOTM 1 -#define CONFIG_CMD_CRC32 1 -#define CONFIG_CMD_EXPORTENV 1 -#define CONFIG_CMD_GO 1 -#define CONFIG_CMD_IMPORTENV 1 - -#endif diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 90d990157f6..be616e8bfd0 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -53,10 +53,23 @@ #endif #ifdef CONFIG_CMD_SCSI -#define BOOTENV_SHARED_SCSI BOOTENV_SHARED_BLKDEV(scsi) +#define BOOTENV_RUN_SCSI_INIT "run scsi_init; " +#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; " +#define BOOTENV_SHARED_SCSI \ + "scsi_init=" \ + "if ${scsi_need_init}; then " \ + "setenv scsi_need_init false; " \ + "scsi scan; " \ + "fi\0" \ + \ + "scsi_boot=" \ + BOOTENV_RUN_SCSI_INIT \ + BOOTENV_SHARED_BLKDEV_BODY(scsi) #define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV #else +#define BOOTENV_RUN_SCSI_INIT +#define BOOTENV_SET_SCSI_NEED_INIT #define BOOTENV_SHARED_SCSI #define BOOTENV_DEV_SCSI \ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI @@ -189,7 +202,7 @@ \ BOOT_TARGET_DEVICES(BOOTENV_DEV) \ \ - "bootcmd=" BOOTENV_SET_USB_NEED_INIT \ + "bootcmd=" BOOTENV_SET_USB_NEED_INIT BOOTENV_SET_SCSI_NEED_INIT \ "for target in ${boot_targets}; do " \ "run bootcmd_${target}; " \ "done\0" diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 953d06b53c4..9063c57b409 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -227,6 +227,7 @@ unsigned long get_board_ddr_clk(void); #endif /* EEPROM */ +#define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 @@ -819,9 +820,16 @@ unsigned long get_board_ddr_clk(void); #define __USB_PHY_TYPE ulpi +#ifdef CONFIG_PPC_B4860 +#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null," \ + "bank_intlv=cs0_cs1;" \ + "en_cpc:cpc2;" +#else +#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=null," \ - "bank_intlv=cs0_cs1;" \ + HWCONFIG \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 0ee0ff242d3..5e2c100d930 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -19,6 +19,9 @@ #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg #endif #ifdef CONFIG_T1042RDB_PI +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg +#endif +#ifdef CONFIG_T1042RDB #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg #endif @@ -477,7 +480,7 @@ /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define I2C_MUX_CH_DEFAULT 0x8 #endif @@ -503,6 +506,7 @@ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_BAR #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -633,7 +637,7 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define CONFIG_QE #define CONFIG_U_QE #endif @@ -662,7 +666,7 @@ #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_QE_FW_ADDR 0x130000 #elif defined(CONFIG_SDCARD) @@ -686,7 +690,7 @@ #endif #ifdef CONFIG_FMAN_ENET -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 #endif #define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 @@ -788,13 +792,14 @@ #define CONFIG_BAUDRATE 115200 #define __USB_PHY_TYPE utmi +#define RAMDISKFILE "t104xrdb/ramdisk.uboot" #ifdef CONFIG_T1040RDB #define FDTFILE "t1040rdb/t1040rdb.dtb" -#define RAMDISKFILE "t1040rdb/ramdisk.uboot" -#elif CONFIG_T1042RDB_PI -#define FDTFILE "t1040rdb_pi/t1040rdb_pi.dtb" -#define RAMDISKFILE "t1040rdb_pi/ramdisk.uboot" +#elif defined(CONFIG_T1042RDB_PI) +#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb" +#elif defined(CONFIG_T1042RDB) +#define FDTFILE "t1042rdb/t1042rdb.dtb" #endif #ifdef CONFIG_FSL_DIU_FB diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index df1a6fc5288..e2f7ead9bc3 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -23,9 +23,6 @@ # define CONFIG_TIMESTAMP # define CONFIG_LZO # ifdef CONFIG_ENABLE_VBOOT -# define CONFIG_OF_CONTROL -# define CONFIG_OF_SEPARATE -# define CONFIG_DEFAULT_DEVICE_TREE am335x-boneblack # define CONFIG_FIT_SIGNATURE # define CONFIG_RSA # endif @@ -115,6 +112,9 @@ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ "ip=dhcp\0" \ "bootenv=uEnv.txt\0" \ + "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" \ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t -r $loadaddr $filesize\0" \ @@ -142,17 +142,21 @@ "mmcboot=mmc dev ${mmcdev}; " \ "if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadimage; then " \ - "run mmcloados;" \ - "fi;" \ + "if run loadbootscript; then " \ + "run bootscript;" \ + "else " \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loadimage; then " \ + "run mmcloados;" \ + "fi;" \ + "fi ;" \ "fi;\0" \ "spiboot=echo Booting from spi ...; " \ "run spiargs; " \ @@ -398,8 +402,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 75f99337780..43077cf851f 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -22,8 +22,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE /* Allow tracing to be enabled */ #define CONFIG_TRACE @@ -226,7 +224,6 @@ #define CONFIG_POWER_I2C #define CONFIG_POWER_MAX77686 -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale #define CONFIG_PREBOOT diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 9b0e588c6b8..f02fce95b39 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -31,6 +31,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD /* general purpose I/O */ #define CONFIG_AT91_GPIO diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 3747098d2ad..b8d5dd156f9 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -34,6 +34,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_ATMEL_LEGACY #define CONFIG_AT91_GPIO 1 #define CONFIG_AT91_GPIO_PULLUP 1 diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index c1eda963851..d0828d5f5c1 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -137,7 +137,6 @@ #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/beaver.h b/include/configs/beaver.h index d8ed717f5a4..164b2dd9518 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -24,11 +24,6 @@ /* VDD core PMIC */ #define CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 -/* Enable fdt support for Beaver. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-beaver -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (Beaver) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Beaver" diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h index 5db181984f3..0b66cdbc01b 100644 --- a/include/configs/bf506f-ezkit.h +++ b/include/configs/bf506f-ezkit.h @@ -85,8 +85,6 @@ */ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE 0x400 -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV /* @@ -102,7 +100,6 @@ #define CONFIG_CMD_MEMORY #undef CONFIG_GZIP #undef CONFIG_ZLIB -#undef CONFIG_CMD_BOOTM #undef CONFIG_BOOTM_RTEMS #undef CONFIG_BOOTM_LINUX diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 9e374c40244..20f6ed1992f 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -155,7 +155,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 972eca9c174..c33d0350228 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -153,7 +153,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* define to enable run status via led */ /* #define CONFIG_STATUS_LED */ diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index c0dfe2685bf..b497f267738 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -136,7 +136,6 @@ */ #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 92c183e27c2..0bca53f2a69 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -179,7 +179,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index 458868af726..9d43b811e3e 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -112,7 +112,6 @@ */ #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index b50352823e7..0fda967ac24 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -110,7 +110,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 3d36d84c7cb..ae4d83a8f14 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -186,7 +186,6 @@ */ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* FLASH/ETHERNET uses the same async bank */ #define SHARED_RESOURCES 1 diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index a302f839a1e..29f9316067d 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -254,7 +254,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* Define if want to do post memory test */ #undef CONFIG_POST diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 32df5ec8f09..a65528246d6 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -135,7 +135,6 @@ */ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 1a245a2b818..da5f0294351 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -181,7 +181,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #define CONFIG_ADI_GPIO2 diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 3db917e37bc..6871d8c4222 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -160,7 +160,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BAUDRATE 57600 #define CONFIG_SYS_PROMPT "Acvilon> " -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 0a309d92694..fb6f94873af 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -102,7 +102,6 @@ * Misc Settings */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Run core 1 from L1 SRAM start address when init uboot on core 0 diff --git a/include/configs/br4.h b/include/configs/br4.h index f8d3158d475..3f240085e3f 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -135,7 +135,6 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 3f889f8d4f4..e9d5d016201 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -151,7 +151,6 @@ #undef CONFIG_CMD_NFS #undef CONFIG_CMD_SETGETDCR #undef CONFIG_CMD_XIMG -#undef CONFIG_CMD_CRC32 /* define command we need always */ #define CONFIG_CMD_ECHO #define CONFIG_CMD_SOURCE diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 59f429cf578..09129c77673 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -24,11 +24,6 @@ /* VDD core PMIC */ #define CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 -/* Enable fdt support for Cardhu. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-cardhu -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (Cardhu) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Cardhu" diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 8d3ae49913e..f5351ad2643 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -128,7 +128,6 @@ #define FLASHBOOT_ENV_SETTINGS \ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index 8bd499a7d2c..485f01a01c0 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -97,7 +97,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 47967d71203..1729b44a1bf 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -146,7 +146,6 @@ "flashboot=flread 20040000 1000000 3c0000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 88c99821b1e..272aa744a95 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -143,7 +143,6 @@ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 346e27f3ebd..7f27eda416d 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -117,7 +117,6 @@ #define CONFIG_UART_CONSOLE 1 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #define CONFIG_ADI_GPIO2 diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 5265e5f6ef0..96910a7afd2 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -99,7 +99,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h new file mode 100644 index 00000000000..10d02b4e18c --- /dev/null +++ b/include/configs/cm_fx6.h @@ -0,0 +1,290 @@ +/* + * Config file for Compulab CM-FX6 board + * + * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ + * + * Author: Nikita Kiryanov <nikita@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_CM_FX6_H +#define __CONFIG_CM_FX6_H + +#include <asm/arch/imx-regs.h> +#include <config_distro_defaults.h> +#include "mx6_common.h" + +/* Machine config */ +#define CONFIG_MX6 +#define CONFIG_SYS_LITTLE_ENDIAN +#define CONFIG_MACH_TYPE 4273 +#define CONFIG_SYS_HZ 1000 + +/* Display information on boot */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_TIMESTAMP + +/* CMD */ +#include <config_cmd_default.h> +#define CONFIG_CMD_GREPENV +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_XIMG +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMLS + +/* MMC */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_USDHC_NUM 3 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR + +/* RAM */ +#define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* Serial console */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART4_BASE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* Shell */ +#define CONFIG_SYS_PROMPT "CM-FX6 # " +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* SPI flash */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) + +/* Environment */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_OFFSET (768 * 1024) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel=uImage-cm-fx6\0" \ + "autoload=no\0" \ + "loadaddr=0x10800000\0" \ + "fdtaddr=0x11000000\0" \ + "console=ttymxc3,115200\0" \ + "ethprime=FEC0\0" \ + "bootscr=boot.scr\0" \ + "bootm_low=18000000\0" \ + "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \ + "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \ + "fdtfile=cm-fx6.dtb\0" \ + "doboot=bootm ${loadaddr}\0" \ + "loadfdt=false\0" \ + "setboottypez=setenv kernel zImage-cm-fx6;" \ + "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \ + "setenv loadfdt true;\0" \ + "setboottypem=setenv kernel uImage-cm-fx6;" \ + "setenv doboot bootm ${loadaddr};" \ + "setenv loadfdt false;\0"\ + "run_eboot=echo Starting EBOOT ...; "\ + "mmc dev ${mmcdev} && " \ + "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \ + "mmcdev=2\0" \ + "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ + "loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \ + "mmcbootscript=echo Running bootscript from mmc ...; "\ + "source ${loadaddr}\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=${mmcroot} " \ + "${video}\0" \ + "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \ + "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "run doboot\0" \ + "satadev=0\0" \ + "sataroot=/dev/sda2 rw rootwait\0" \ + "sataargs=setenv bootargs console=${console} " \ + "root=${sataroot} " \ + "${video}\0" \ + "loadsatabootscript=load sata ${satadev} ${loadaddr} ${bootscr}\0" \ + "satabootscript=echo Running bootscript from sata ...; " \ + "source ${loadaddr}\0" \ + "sataloadkernel=load sata ${satadev} ${loadaddr} ${kernel}\0" \ + "sataloadfdt=load sata ${satadev} ${fdtaddr} ${fdtfile}\0" \ + "sataboot=echo Booting from sata ...; "\ + "run sataargs; " \ + "run doboot\0" \ + "nandroot=/dev/mtdblock4 rw\0" \ + "nandrootfstype=ubifs\0" \ + "nandargs=setenv bootargs console=${console} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype} " \ + "${video}\0" \ + "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 0 780000; " \ + "if ${loadfdt}; then " \ + "run nandloadfdt;" \ + "fi; " \ + "run doboot\0" \ + "boot=mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "if run loadmmcbootscript; then " \ + "run mmcbootscript;" \ + "else " \ + "if run mmcloadkernel; then " \ + "if ${loadfdt}; then " \ + "run mmcloadfdt;" \ + "fi;" \ + "run mmcboot;" \ + "fi;" \ + "fi;" \ + "fi;" \ + "if sata init; then " \ + "if run loadsatabootscript; then " \ + "run satabootscript;" \ + "else "\ + "if run sataloadkernel; then " \ + "if ${loadfdt}; then " \ + "run sataloadfdt; " \ + "fi;" \ + "run sataboot;" \ + "fi;" \ + "fi;" \ + "fi;" \ + "run nandboot\0" + +#define CONFIG_BOOTCOMMAND \ + "run setboottypem; run boot" + +/* SPI */ +#define CONFIG_SPI +#define CONFIG_MXC_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SPI_FLASH_EON +#define CONFIG_SPI_FLASH_GIGADEVICE +#define CONFIG_SPI_FLASH_MACRONIX +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_WINBOND + +/* NAND */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_NAND_MXS +#define CONFIG_SYS_NAND_ONFI_DETECTION +/* APBH DMA is required for NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 +#endif + +/* Ethernet */ +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_FEC_XCV_TYPE RGMII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS +#define CONFIG_MII +#define CONFIG_ETHPRIME "FEC0" +#define CONFIG_ARP_TIMEOUT 200UL +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_NET_RETRY_COUNT 5 + +/* USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ + +/* I2C */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_MXC_I2C3_SPEED 400000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_BUS 2 + +/* SATA */ +#define CONFIG_CMD_SATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_DWC_AHSATA +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR + +/* GPIO */ +#define CONFIG_MXC_GPIO + +/* Boot */ +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_LOADADDR 0x10800000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SERIAL_TAG + +/* misc */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_STACKSIZE (128 * 1024) +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ +#define CONFIG_OF_BOARD_SETUP + +/* SPL */ +#include "imx6_spl.h" +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */ +#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024) +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) +#define CONFIG_SPL_SPI_LOAD + +#endif /* __CONFIG_CM_FX6_H */ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index a3e6452ec1d..767ef3a266b 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -107,6 +107,7 @@ /* I2C Configuration */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_BUS 0 /* SPL */ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 70df1ebc677..6f4d97f2fd0 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -135,6 +135,7 @@ #define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_BUS 0 #define CONFIG_I2C_MULTI_BUS /* diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index df93a59c1bd..641ab48c2c8 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -30,6 +30,7 @@ #define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_BUS 0 /* Enable SD/MMC CD and WP GPIOs */ #define OMAP_HSMMC_USE_GPIO diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h index 6f9e08cac08..2b876fede11 100644 --- a/include/configs/colibri_t20_iris.h +++ b/include/configs/colibri_t20_iris.h @@ -9,11 +9,6 @@ #include "tegra20-common.h" -/* Enable FDT support */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Colibri) # " #define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris" diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index eacff5b7921..782b9d16b7a 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -11,9 +11,6 @@ #include "tegra30-common.h" -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-colibri -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE #define V_PROMPT "Colibri T30 # " #define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T30" diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 7eaaf69951b..bfcfa0c8c97 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -434,7 +434,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT -#undef CONFIG_CMD_BOOTM #endif /* CONFIG_TRAILBLAZER */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index a1a63a018de..936be145119 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -28,9 +28,6 @@ #define CONFIG_LMB #define CONFIG_OF_LIBFDT -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE -#define CONFIG_DEFAULT_DEVICE_TREE link #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 1252d7a54a9..5f857557375 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -157,8 +157,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000 #endif @@ -376,8 +374,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index fd774a3314f..ff7ec4a93bb 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -21,11 +21,6 @@ #include "tegra114-common.h" -/* Enable fdt support for Dalmore. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra114-dalmore -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra114 (Dalmore) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Dalmore" diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 4143a4ddeb4..2eaabdefeea 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -116,8 +116,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #define CONFIG_SUPPORT_EMMC_BOOT diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index a7fd43bc7b8..185edbe7fea 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -102,7 +102,7 @@ #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(2, 30) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h index 7dac1a37175..99472acd0cb 100644 --- a/include/configs/exynos4-dt.h +++ b/include/configs/exynos4-dt.h @@ -22,10 +22,6 @@ #define CONFIG_BOARD_COMMON #define CONFIG_SYS_GENERIC_BOARD -/* Enable fdt support */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - #define CONFIG_SYS_CACHELINE_SIZE 32 /* input clock of PLL: EXYNOS4 boards have 24MHz input clock */ diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h index a7c62928631..1dc30025237 100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-dt.h @@ -24,10 +24,6 @@ #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_EXYNOS_SPL -/* Enable fdt support for Exynos5250 */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* Allow tracing to be enabled */ #define CONFIG_TRACE #define CONFIG_CMD_TRACE diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index b991b093cb6..620f9501d25 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -61,7 +61,7 @@ #define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_BUS 0 - #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) + #define CONFIG_SF_DEFAULT_CS 0 /* GPIO 3-19 (21248) */ #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) @@ -141,6 +141,7 @@ #define CONFIG_PCI #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCI_FIXUP_DEV #define CONFIG_PCIE_IMX #endif diff --git a/include/configs/h2200.h b/include/configs/h2200.h index 9470ad6abcf..109cee985bc 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -116,7 +116,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } -#define CONFIG_CMD_IMPORTENV 1 #define CONFIG_CMD_LOADB #define CONFIG_CMD_SOURCE #define CONFIG_CMD_RUN diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 3ec0e418c1e..ff9fbc9965a 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Harmony. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-harmony -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Harmony) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Harmony" diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 3767502faa5..ec510bdac42 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -133,7 +133,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_MISC_INIT_R /* needed for MAC address */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #undef CONFIG_SHOW_BOOT_PROGRESS /* Enable this if bootretry required; currently it's disabled */ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index d03a66cd224..d67c025b9c6 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -12,11 +12,6 @@ #include "tegra124-common.h" -/* Enable fdt support for Jetson TK1. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra124-jetson-tk1 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra124 (Jetson TK1) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Jetson TK1" diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index 43db581c75d..51926f721f1 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -58,8 +58,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/kwb.h b/include/configs/kwb.h index 0860434f229..29b263f301f 100644 --- a/include/configs/kwb.h +++ b/include/configs/kwb.h @@ -89,7 +89,6 @@ #undef CONFIG_BOOTM_RTEMS #undef CONFIG_GZIP #undef CONFIG_ZLIB -#undef CONFIG_CMD_CRC32 /* USB configuration */ #define CONFIG_USB_MUSB_DSPS diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 657e3b6d48d..bb478133453 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -49,10 +49,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DDR_SPD #define SPD_EEPROM_ADDRESS 0x51 #define CONFIG_SYS_SPD_BUS_NUM 0 -#define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ +#ifndef CONFIG_SYS_FSL_DDR4 #define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */ +#define CONFIG_SYS_DDR_RAW_TIMING +#endif #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 2bd5a472b37..a72e1f3567d 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -15,9 +15,11 @@ #define CONFIG_GICV3 /* Link Definitions */ -#define CONFIG_SYS_TEXT_BASE 0x30000000 +#define CONFIG_SYS_TEXT_BASE 0x30001000 +#ifdef CONFIG_EMU #define CONFIG_SYS_NO_FLASH +#endif #define CONFIG_SUPPORT_RAW_INITRD @@ -45,13 +47,27 @@ #define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */ -/* SMP Definitions */ -#define CPU_RELEASE_ADDR CONFIG_SYS_INIT_SP_ADDR - #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL +#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 2 + +/* + * SMP Definitinos + */ +#define CPU_RELEASE_ADDR secondary_boot_func + +#define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS +#define CONFIG_SYS_DP_DDR_BASE 0x6000000000ULL +/* + * DDR controller use 0 as the base address for binding. + * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. + */ +#define CONFIG_SYS_DP_DDR_BASE_PHY 0 +#define CONFIG_DP_DDR_CTRL 2 +#define CONFIG_DP_DDR_NUM_CTRLS 1 +#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 12000000 /* 12MHz */ @@ -118,6 +134,66 @@ #define CONFIG_SYS_NOR_FTIM3 0x04000000 #define CONFIG_SYS_IFC_CCR 0x01000000 +#ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#endif + +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_MAX_ECCPOS 256 +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 +#define CONFIG_SYS_NAND_BASE 0x520000000 +#define CONFIG_SYS_NAND_BASE_PHYS 0x20000000 + +#define CONFIG_SYS_NAND_CSPR_EXT (0x0) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY #define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR @@ -167,6 +243,7 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) +#define CONFIG_ARCH_EARLY_INIT_R /* Physical Memory Map */ /* fixme: these need to be checked against the board */ @@ -174,7 +251,7 @@ #define CONFIG_SYS_CLK_FREQ 133333333 -#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_NR_DRAM_BANKS 3 #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h index a5cea63b337..487cd99c5dc 100644 --- a/include/configs/ls2085a_emu.h +++ b/include/configs/ls2085a_emu.h @@ -13,6 +13,7 @@ #define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */ #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */ diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h index 46d47b06e44..0f40b787b47 100644 --- a/include/configs/ls2085a_simu.h +++ b/include/configs/ls2085a_simu.h @@ -13,4 +13,13 @@ #define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE (0x2210000) +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 + #endif /* __LS2_SIMU_H */ diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index 40155c37960..ac5208fa0d3 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Medcom-Wide. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-medcom-wide -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Medcom-Wide) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Medcom-Wide" diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 1a82a57c755..bb070600021 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -14,11 +14,6 @@ /* MicroBlaze CPU */ #define MICROBLAZE_V5 1 -/* Open Firmware DTS */ -#define CONFIG_OF_CONTROL 1 -#define CONFIG_OF_EMBED 1 -#define CONFIG_DEFAULT_DEVICE_TREE microblaze-generic - /* linear and spi flash memory */ #ifdef XILINX_FLASH_START #define FLASH diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index 0f2a4ef973f..fce7ead977a 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -96,11 +96,11 @@ #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST -#define CONFIG_SF_DEFAULT_CS (1 | 121 << 8) +#define CONFIG_SF_DEFAULT_CS 1 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #define CONFIG_SF_DEFAULT_SPEED 25000000 -#define CONFIG_ENV_SPI_CS (1 | 121 << 8) +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_MAX_HZ 25000000 #define CONFIG_ENV_SPI_MODE (SPI_MODE_0) diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index fd651cfa500..35c0a850801 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -23,6 +23,8 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_SYS_GENERIC_BOARD + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index d1639c4c761..0ab31279ccd 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -45,7 +45,4 @@ #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_OF_SEPARATE -#define CONFIG_DEFAULT_DEVICE_TREE imx6q-sabreauto - #endif /* __MX6QSABREAUTO_CONFIG_H */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index e59a3b4b058..2d93d6c7007 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -74,7 +74,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 9) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 3d05a647d94..4208ba15633 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -26,6 +26,8 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) @@ -203,7 +205,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 11) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 1eda65e0818..b92d9443d47 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -198,6 +198,16 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_ATHEROS +#define CONFIG_CMD_PCI +#ifdef CONFIG_CMD_PCI +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCIE_IMX +#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 1) +#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 0) +#endif + /* FLASH and environment organization */ #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index b2b17ce969d..39d5bb34bb2 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -53,7 +53,7 @@ #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 25000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #endif @@ -192,11 +192,11 @@ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ - "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 29dcc4a298e..b616ac2fbd2 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -16,8 +16,6 @@ #define CONFIG_SYS_PROMPT "Odroid # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-odroid #define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF diff --git a/include/configs/origen.h b/include/configs/origen.h index 5d24916389c..fb1536c62ca 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_PROMPT "ORIGEN # " -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-origen /* High Level Configuration Options */ #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index dd0abf8de6b..45bb47088bc 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -20,11 +20,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Paz00. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-paz00 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Paz00) MOD # " #define CONFIG_TEGRA_BOARD_STRING "Compal Paz00" diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 5efcd7613f1..7d102a46996 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -128,8 +128,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #endif diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 88c093fb9b4..987cef504c9 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -13,8 +13,6 @@ #include <configs/exynos5420.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-peach-pit /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h new file mode 100644 index 00000000000..a28d7b579a6 --- /dev/null +++ b/include/configs/ph1_ld4.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PH1_XXX_H +#define __PH1_XXX_H + +/* + * Support Card Select + * + * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. + * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. + * CPLD is re-programmed for ARIMA board compatibility. + * No define - No support card. + */ + +#if 0 +#define CONFIG_PFC_MICRO_SUPPORT_CARD +#else +#define CONFIG_DCC_MICRO_SUPPORT_CARD +#endif + +/* + * Serial Configuration + * SoC UART : enable CONFIG_UNIPHIER_SERIAL + * On-board UART: enable CONFIG_SYS_NS16550_SERIAL + */ +#if 1 +#define CONFIG_UNIPHIER_SERIAL +#else +#define CONFIG_SYS_NS16550_SERIAL +#endif + +#define CONFIG_SYS_UNIPHIER_UART_CLK 36864000 + +#define CONFIG_SMC911X + +#define CONFIG_DDR_NUM_CH0 1 +#define CONFIG_DDR_NUM_CH1 1 + +#define CONFIG_DDR_FREQ 1600 + +/* + * Memory Size & Mapping + */ +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x10000000 +#define CONFIG_SDRAM1_BASE 0x90000000 +#define CONFIG_SDRAM1_SIZE 0x10000000 + +#define CONFIG_SPL_TEXT_BASE 0x40000 + +#include "uniphier-common.h" + +#endif /* __PH1_XXX_H */ diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h new file mode 100644 index 00000000000..b79967f7da4 --- /dev/null +++ b/include/configs/ph1_pro4.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PH1_XXX_H +#define __PH1_XXX_H + +/* + * Support Card Select + * + * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. + * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. + * CPLD is re-programmed for ARIMA board compatibility. + * No define - No support card. + */ + +#if 0 +#define CONFIG_PFC_MICRO_SUPPORT_CARD +#else +#define CONFIG_DCC_MICRO_SUPPORT_CARD +#endif + +/* + * Serial Configuration + * SoC UART : enable CONFIG_UNIPHIER_SERIAL + * On-board UART: enable CONFIG_SYS_NS16550_SERIAL + */ +#if 1 +#define CONFIG_UNIPHIER_SERIAL +#else +#define CONFIG_SYS_NS16550_SERIAL +#endif + +#define CONFIG_SYS_UNIPHIER_UART_CLK 73728000 + +#define CONFIG_SMC911X + +#define CONFIG_DDR_NUM_CH0 2 +#define CONFIG_DDR_NUM_CH1 2 + +#define CONFIG_DDR_FREQ 1600 + +#define CONFIG_UNIPHIER_SMP + +/* + * Memory Size & Mapping + */ +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x20000000 +#define CONFIG_SDRAM1_BASE 0xa0000000 +#define CONFIG_SDRAM1_SIZE 0x20000000 + +#define CONFIG_SPL_TEXT_BASE 0x100000 + +#include "uniphier-common.h" + +#endif /* __PH1_XXX_H */ diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h new file mode 100644 index 00000000000..9d391f1d74a --- /dev/null +++ b/include/configs/ph1_sld8.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PH1_XXX_H +#define __PH1_XXX_H + +/* + * Support Card Select + * + * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. + * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. + * CPLD is re-programmed for ARIMA board compatibility. + * No define - No support card. + */ + +#if 0 +#define CONFIG_PFC_MICRO_SUPPORT_CARD +#else +#define CONFIG_DCC_MICRO_SUPPORT_CARD +#endif + +/* + * Serial Configuration + * SoC UART : enable CONFIG_UNIPHIER_SERIAL + * On-board UART: enable CONFIG_SYS_NS16550_SERIAL + */ +#if 1 +#define CONFIG_UNIPHIER_SERIAL +#else +#define CONFIG_SYS_NS16550_SERIAL +#endif + +#define CONFIG_SYS_UNIPHIER_UART_CLK 80000000 + +#define CONFIG_SMC911X + +#define CONFIG_DDR_NUM_CH0 1 +#define CONFIG_DDR_NUM_CH1 1 + +#define CONFIG_DDR_FREQ 1333 + +/* #define CONFIG_DDR_STANDARD */ + +/* + * Memory Size & Mapping + */ +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x10000000 +#define CONFIG_SDRAM1_BASE 0x90000000 +#define CONFIG_SDRAM1_SIZE 0x10000000 + +#define CONFIG_SPL_TEXT_BASE 0x40000 + +#include "uniphier-common.h" + +#endif /* __PH1_XXX_H */ diff --git a/include/configs/plutux.h b/include/configs/plutux.h index a473f232f36..b663b89d2c7 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Plutux. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-plutux -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Plutux) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Plutux" diff --git a/include/configs/pr1.h b/include/configs/pr1.h index e96ed4b4f28..0f57e868a5d 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -135,7 +135,6 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 20985da9a0e..082d51c52b5 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-universal_c210 #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 56c2454dff2..c46baf254f1 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -79,8 +79,19 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* No NOR flash */ +/* NOR flash */ +#define CONFIG_CMD_FLASH + +#ifdef CONFIG_CMD_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_BASE 0x10000000 +#define CONFIG_SYS_MAX_FLASH_SECT 131 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#else #define CONFIG_SYS_NO_FLASH +#endif /* * Command line configuration. @@ -287,8 +298,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index f5fa4b3ddc3..69726432a3c 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -38,15 +38,12 @@ /* Number of bits in a C 'long' on this architecture */ #define CONFIG_SANDBOX_BITS_PER_LONG 64 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_HOSTFILE #define CONFIG_OF_LIBFDT #define CONFIG_LMB #define CONFIG_FIT #define CONFIG_FIT_SIGNATURE #define CONFIG_RSA #define CONFIG_CMD_FDT -#define CONFIG_DEFAULT_DEVICE_TREE sandbox #define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_FS_FAT @@ -94,7 +91,7 @@ #define CONFIG_ENV_SIZE 8192 #define CONFIG_ENV_IS_NOWHERE -/* SPI */ +/* SPI - enable all SPI flash types for testing purposes */ #define CONFIG_SANDBOX_SPI #define CONFIG_CMD_SF #define CONFIG_CMD_SF_TEST @@ -102,7 +99,13 @@ #define CONFIG_SPI_FLASH #define CONFIG_OF_SPI #define CONFIG_OF_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SPI_FLASH_EON +#define CONFIG_SPI_FLASH_GIGADEVICE +#define CONFIG_SPI_FLASH_MACRONIX #define CONFIG_SPI_FLASH_SANDBOX +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_SST #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_WINBOND diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index fc4f976d8d3..04e4f82759f 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -19,11 +19,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (SeaBoard) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index b8fb77e8137..bf9752f8742 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -167,8 +167,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 66fa1799e7b..61170941c12 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -11,8 +11,6 @@ #include <configs/exynos5250-dt.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-smdk5250 /* Enable FIT support and comparison */ #define CONFIG_FIT diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 606739b02e5..36a156f7a74 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -15,8 +15,6 @@ #define CONFIG_SMDK5420 /* which is in a SMDK5420 */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-smdk5420 /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ diff --git a/include/configs/snow.h b/include/configs/snow.h index 673fa1469b8..fbaaa593cc8 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -11,8 +11,6 @@ #include <configs/exynos5250-dt.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-snow /* Enable FIT support and comparison */ #define CONFIG_FIT diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index a77ba697d0f..66730267a33 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -116,7 +116,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index c4c1c579bc1..999834351f3 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -145,7 +145,6 @@ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index 13baa76f915..51f87dacdbe 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -10,11 +10,6 @@ #include "tegra30-common.h" -/* Enable fdt support for tec-ng. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-tec-ng -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (TEC-NG) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten™ NG Evaluation Carrier" diff --git a/include/configs/tec.h b/include/configs/tec.h index 90e7b7ad97c..9ea4ff49711 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for TEC. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-tec -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (TEC) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index c337e3016e7..23e3c8af31a 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -69,7 +69,6 @@ /* remove devicetree support */ #ifdef CONFIG_OF_CONTROL -#undef CONFIG_OF_CONTROL #endif /* remove I2C support */ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 8c7310c9a1d..b0f199e3f4a 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -101,10 +101,10 @@ "vram=${vram} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ "env import -t ${loadaddr} ${filesize}\0" \ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ diff --git a/include/configs/trats.h b/include/configs/trats.h index 6fa646bb8cf..43751e7938e 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -16,8 +16,6 @@ #define CONFIG_TRATS -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-trats #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 14508650e46..e9a04f7af3b 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -15,8 +15,6 @@ #define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-trats2 #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index f81cfa2e354..7c0064267da 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for TrimSlice. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-trimslice -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (TrimSlice) # " #define CONFIG_TEGRA_BOARD_STRING "Compulab Trimslice" diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 1dd13fd1b07..9a6207048cd 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -222,8 +222,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h new file mode 100644 index 00000000000..18fe277cada --- /dev/null +++ b/include/configs/uniphier-common.h @@ -0,0 +1,266 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* U-boot - Common settings for UniPhier Family */ + +#ifndef __CONFIG_UNIPHIER_COMMON_H__ +#define __CONFIG_UNIPHIER_COMMON_H__ + +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) && \ + defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \ +are defined. Select only one of them." +#endif + +/* + * Support card address map + */ +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) +# define CONFIG_SUPPORT_CARD_BASE 0x03f00000 +# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) +# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000) +# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000) +#endif + +#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +# define CONFIG_SUPPORT_CARD_BASE 0x08000000 +# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) +# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00401630) +# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000) +#endif + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_COM1 CONFIG_SUPPORT_CARD_UART_BASE +#define CONFIG_SYS_NS16550_CLK 12288000 +#define CONFIG_SYS_NS16550_REG_SIZE -2 + +#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE +#define CONFIG_SMC911X_32_BIT + +#define CONFIG_SYS_UNIPHIER_SERIAL_BASE0 0x54006800 +#define CONFIG_SYS_UNIPHIER_SERIAL_BASE1 0x54006900 +#define CONFIG_SYS_UNIPHIER_SERIAL_BASE2 0x54006a00 +#define CONFIG_SYS_UNIPHIER_SERIAL_BASE3 0x54006b00 + +/*----------------------------------------------------------------------- + * MMU and Cache Setting + *----------------------------------------------------------------------*/ + +/* Comment out the following to enable L1 cache */ +/* #define CONFIG_SYS_ICACHE_OFF */ +/* #define CONFIG_SYS_DCACHE_OFF */ + +/* Comment out the following to enable L2 cache */ +#define CONFIG_UNIPHIER_L2CACHE_ON + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +#define CONFIG_TIMESTAMP + +/* FLASH related */ +#define CONFIG_MTD_DEVICE + +/* + * uncomment the following to disable FLASH related code. + */ +/* #define CONFIG_SYS_NO_FLASH */ + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI + +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_MONITOR_BASE 0 +#define CONFIG_SYS_FLASH_BASE 0 + +/* + * flash_toggle does not work for out supoort card. + * We need to use flash_status_poll. + */ +#define CONFIG_SYS_CFI_FLASH_STATUS_POLL + +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) +# define CONFIG_SYS_MAX_FLASH_BANKS 1 +# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000} +# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000} +#endif + +#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +# define CONFIG_SYS_MAX_FLASH_BANKS 1 +# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000} +# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000} +#endif + +/* serial console configuration */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_GENERIC_BOARD + +#if !defined(CONFIG_SPL_BUILD) +#define CONFIG_USE_ARCH_MEMSET +#define CONFIG_USE_ARCH_MEMCPY +#endif + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_CONS_INDEX 1 + +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/canyonlands/u-boot-nand.lds for details. + */ +/* #define CONFIG_ENV_IS_IN_NAND */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET 0x0 +/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ + +/* Time clock 1MHz */ +#define CONFIG_SYS_TIMER_RATE 1000000 + +/* + * By default, ARP timeout is 5 sec. + * The first ARP request does not seem to work. + * So we need to retry ARP request anyway. + * We want to shrink the interval until the second ARP request. + */ +#define CONFIG_ARP_TIMEOUT 500UL /* 0.5 msec */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_TIME +#define CONFIG_CMD_NAND /* NAND flash suppport */ + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 2 +#define CONFIG_SYS_NAND_ONFI_DETECTION + +#define CONFIG_NAND_DENALI_ECC_SIZE 1024 + +#define CONFIG_SYS_NAND_REGS_BASE 0x68100000 +#define CONFIG_SYS_NAND_DATA_BASE 0x68000000 + +#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) + +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 + +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * Network Configuration + */ +#define CONFIG_ETHADDR 00:21:83:24:00:00 +#define CONFIG_SERVERIP 192.168.11.1 +#define CONFIG_IPADDR 192.168.11.10 +#define CONFIG_GATEWAYIP 192.168.11.1 +#define CONFIG_NETMASK 255.255.255.0 + +#define CONFIG_LOADADDR 0x84000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_BOOTFILE "fit.itb" + +#define CONFIG_CMDLINE_EDITING /* add command line history */ + +#define CONFIG_BOOTCOMMAND "run $bootmode" + +#define CONFIG_ROOTPATH "/nfs/root/path" +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs $bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ + "tftpboot; bootm;" + +#define CONFIG_BOOTARGS " user_debug=0x1f init=/sbin/init" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "image_offset=0x00080000\0" \ + "image_size=0x00f00000\0" \ + "verify=n\0" \ + "autostart=yes\0" \ + "norboot=run add_default_bootargs;" \ + "bootm $image_offset\0" \ + "nandboot=run add_default_bootargs;" \ + "nand read $loadaddr $image_offset $image_size;" \ + "bootm\0" \ + "add_default_bootargs=setenv bootargs $bootargs" \ + " console=ttyS0,$baudrate\0" \ + +/* FIT support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ + +/* Open Firmware flat tree */ +#define CONFIG_OF_LIBFDT + +#define CONFIG_HAVE_ARM_SECURE + +/* Memory Size & Mapping */ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SDRAM0_BASE + +#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE +/* Thre is no memory hole */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE) +#else +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE) +#endif + +#define CONFIG_SYS_TEXT_BASE 0x84000000 + +#if defined(CONFIG_SPL_BUILD) +#define CONFIG_BOARD_POSTCLK_INIT +#else +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#define CONFIG_SYS_SPL_MALLOC_START (0x0ff00000) +#define CONFIG_SYS_SPL_MALLOC_SIZE (0x00004000) + +#define CONFIG_SYS_INIT_SP_ADDR (0x0ff08000) + +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_NAND_SUPPORT + +#define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */ +#define CONFIG_SPL_LIBGENERIC_SUPPORT + +#define CONFIG_SPL_BOARD_INIT + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000 + +#endif /* __CONFIG_UNIPHIER_COMMON_H__ */ diff --git a/include/configs/vct.h b/include/configs/vct.h index 5ab4de32741..217ba2fbd9b 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -296,7 +296,6 @@ int vct_gpio_get(int pin); #undef CONFIG_CMD_BEDBUG #undef CONFIG_CMD_CACHE #undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_CRC32 #undef CONFIG_CMD_DHCP #undef CONFIG_CMD_EEPROM #undef CONFIG_CMD_EEPROM diff --git a/include/configs/venice2.h b/include/configs/venice2.h index 6d4e9991a13..6897aa8aa3d 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -12,11 +12,6 @@ #include "tegra124-common.h" -/* Enable fdt support for Venice2. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra124-venice2 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra124 (Venice2) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Venice2" diff --git a/include/configs/ventana.h b/include/configs/ventana.h index edf3720b615..f195f8a6eac 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Ventana. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-ventana -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Ventana) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Ventana" diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 08979320959..f3af971214a 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -51,7 +51,6 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT -#define CONFIG_DEFAULT_DEVICE_TREE vexpress64 /* SMP Spin Table Definitions */ #ifdef CONFIG_BASE_FVP diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 6891bf8b153..3f35076f9e6 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -57,11 +57,11 @@ * Use gpio 4 pin 25 as chip select for SPI flash * This corresponds to gpio 121 */ -#define CONFIG_SF_DEFAULT_CS (1 | (121 << 8)) +#define CONFIG_SF_DEFAULT_CS 1 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 25000000 -#define CONFIG_ENV_SPI_CS (1 | (121 << 8)) +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_MAX_HZ 25000000 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 9e09f03d527..10e70d28b1a 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-whistler -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Whistler) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler" diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 875cb43f15b..0b4dd665b8c 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -227,8 +227,6 @@ #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */ /* FDT support */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE #define CONFIG_DISPLAY_BOARDINFO_LATE /* RSA support */ @@ -273,18 +271,13 @@ #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_FAT_SUPPORT -#if defined(CONFIG_OF_CONTROL) && defined(CONFIG_OF_SEPARATE) -# define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot-dtb.img" -#else -# define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" -#endif +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot-dtb.img" #endif /* Disable dcache for SPL just for sure */ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_DCACHE_OFF #undef CONFIG_FPGA -#undef CONFIG_OF_CONTROL #endif /* Address in RAM where the parameters must be copied by SPL. */ @@ -303,9 +296,7 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000 -#define CONFIG_SPL_SPI_CS 0 #endif /* for booting directly linux */ diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index b0328a2cc17..549a664ef58 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_ZYNQ_SDHCI0 -#define CONFIG_DEFAULT_DEVICE_TREE zynq-microzed #include <configs/zynq-common.h> diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index 291a5fef51d..b6590547a94 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -23,7 +23,6 @@ #define CONFIG_ZYNQ_I2C0 #define CONFIG_ZYNQ_EEPROM #define CONFIG_ZYNQ_BOOT_FREEBSD -#define CONFIG_DEFAULT_DEVICE_TREE zynq-zc702 #include <configs/zynq-common.h> diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 8aa96e7121b..16b904743f1 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -20,18 +20,15 @@ # define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_SPI -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm010 #elif defined(CONFIG_ZC770_XM012) # define CONFIG_ZYNQ_SERIAL_UART1 # undef CONFIG_SYS_NO_FLASH -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm012 #elif defined(CONFIG_ZC770_XM013) # define CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_GEM1 # define CONFIG_ZYNQ_GEM_PHY_ADDR1 7 -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm013 #else # define CONFIG_ZYNQ_SERIAL_UART0 diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h index ce17d4060cc..946de953e4a 100644 --- a/include/configs/zynq_zed.h +++ b/include/configs/zynq_zed.h @@ -21,7 +21,6 @@ #define CONFIG_ZYNQ_USB #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_BOOT_FREEBSD -#define CONFIG_DEFAULT_DEVICE_TREE zynq-zed #include <configs/zynq-common.h> diff --git a/include/fb_mmc.h b/include/fb_mmc.h new file mode 100644 index 00000000000..1ad1d1327da --- /dev/null +++ b/include/fb_mmc.h @@ -0,0 +1,8 @@ +/* + * Copyright 2014 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +void fb_mmc_flash_write(const char *cmd, void *download_buffer, + unsigned int download_bytes, char *response); diff --git a/include/fdt_support.h b/include/fdt_support.h index 1bda686a0b9..c3d1fbcf356 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -133,6 +133,18 @@ static inline int fdt_status_fail_by_alias(void *fdt, const char *alias) return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0); } +/* Helper to read a big number; size is in cells (not bytes) */ +static inline u64 of_read_number(const fdt32_t *cell, int size) +{ + u64 r = 0; + while (size--) + r = (r << 32) | fdt32_to_cpu(*(cell++)); + return r; +} + +void of_bus_default_count_cells(void *blob, int parentoffset, + int *addrc, int *sizec); + #endif /* ifdef CONFIG_OF_LIBFDT */ #ifdef USE_HOSTCC diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h index 5c49b229daf..675557ad1fd 100644 --- a/include/fsl_ddr.h +++ b/include/fsl_ddr.h @@ -15,6 +15,11 @@ #include <common_timing_params.h> +#ifndef CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS +/* All controllers are for main memory */ +#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS CONFIG_NUM_DDR_CONTROLLERS +#endif + #ifdef CONFIG_SYS_FSL_DDR_LE #define ddr_in32(a) in_le32(a) #define ddr_out32(a, v) out_le32(a, v) @@ -57,6 +62,13 @@ typedef struct { memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS]; common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS]; fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS]; + unsigned int first_ctrl; + unsigned int num_ctrls; + unsigned long long mem_base; + unsigned int dimm_slots_per_ctrl; + int (*board_need_mem_reset)(void); + void (*board_mem_reset)(void); + void (*board_mem_de_reset)(void); } fsl_ddr_info_t; /* Compute steps */ @@ -72,7 +84,6 @@ typedef struct { unsigned long long fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, unsigned int size_only); - const char *step_to_string(unsigned int step); unsigned int compute_fsl_memctl_config_regs(const memctl_options_t *popts, @@ -102,7 +113,7 @@ void fsl_ddr_set_lawbar( int fsl_ddr_interactive_env_var_exists(void); unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set); void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num); + unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl); int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr); diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h index 987119b014e..5b03c14c55d 100644 --- a/include/fsl_ddr_sdram.h +++ b/include/fsl_ddr_sdram.h @@ -51,7 +51,6 @@ typedef ddr2_spd_eeprom_t generic_spd_eeprom_t; #define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR2 #endif #elif defined(CONFIG_SYS_FSL_DDR3) -#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) /* FIXME */ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #ifndef CONFIG_FSL_SDRAM_TYPE #define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR3 @@ -352,7 +351,6 @@ typedef struct memctl_options_s { unsigned int twot_en; unsigned int threet_en; unsigned int bstopre; - unsigned int tcke_clock_pulse_width_ps; /* tCKE */ unsigned int tfaw_window_four_activates_ps; /* tFAW -- FOUR_ACT */ /* Rtt impedance */ @@ -379,12 +377,20 @@ typedef struct memctl_options_s { unsigned int trwt; /* read-to-write turnaround */ } memctl_options_t; -extern phys_size_t fsl_ddr_sdram(void); -extern phys_size_t fsl_ddr_sdram_size(void); +phys_size_t fsl_ddr_sdram(void); +phys_size_t fsl_ddr_sdram_size(void); +phys_size_t fsl_other_ddr_sdram(unsigned long long base, + unsigned int first_ctrl, + unsigned int num_ctrls, + unsigned int dimm_slots_per_ctrl, + int (*board_need_reset)(void), + void (*board_reset)(void), + void (*board_de_reset)(void)); extern int fsl_use_spd(void); -extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num, int step); +void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, + unsigned int ctrl_num, int step); u32 fsl_ddr_get_intl3r(void); +void print_ddr_info(unsigned int start_ctrl); static void __board_assert_mem_reset(void) { diff --git a/include/linker_lists.h b/include/linker_lists.h index 557e6273adb..507d61ba9a5 100644 --- a/include/linker_lists.h +++ b/include/linker_lists.h @@ -28,11 +28,11 @@ * together. Assuming _list and _entry are the list and entry names, * then the corresponding input section name is * - * _u_boot_list + _2_ + @_list + _2_ + @_entry + * .u_boot_list_ + 2_ + @_list + _2_ + @_entry * * and the C variable name is * - * .u_boot_list_ + 2_ + @_list + _2_ + @_entry + * _u_boot_list + _2_ + @_list + _2_ + @_entry * * This ensures uniqueness for both input section and C variable name. * diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 02ae99e8e6d..e057bd2a844 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -64,8 +64,12 @@ #endif #define __deprecated __attribute__((deprecated)) +#ifndef __packed #define __packed __attribute__((packed)) +#endif +#ifndef __weak #define __weak __attribute__((weak)) +#endif /* * it doesn't make sense on ARM (currently the only user of __naked) to trace @@ -91,8 +95,12 @@ * would be. * [...] */ +#ifndef __pure #define __pure __attribute__((pure)) +#endif +#ifndef __aligned #define __aligned(x) __attribute__((aligned(x))) +#endif #define __printf(a, b) __attribute__((format(printf, a, b))) #define __scanf(a, b) __attribute__((format(scanf, a, b))) #define noinline __attribute__((noinline)) @@ -115,4 +123,6 @@ */ #define uninitialized_var(x) x = x +#ifndef __always_inline #define __always_inline inline __attribute__((always_inline)) +#endif diff --git a/include/pci.h b/include/pci.h index 461f17c0589..2ff73653c5c 100644 --- a/include/pci.h +++ b/include/pci.h @@ -659,6 +659,13 @@ extern int pci_hose_find_cap_start(struct pci_controller *hose, pci_dev_t dev, extern int pci_find_cap(struct pci_controller *hose, pci_dev_t dev, int pos, int cap); +#ifdef CONFIG_PCI_FIXUP_DEV +extern void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev, + unsigned short vendor, + unsigned short device, + unsigned short class); +#endif + const char * pci_class_str(u8 class); int pci_last_busno(void); diff --git a/include/sata.h b/include/sata.h index c95dc56e944..38f4b4acf6c 100644 --- a/include/sata.h +++ b/include/sata.h @@ -9,6 +9,7 @@ ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer); int sata_initialize(void); int __sata_initialize(void); +int sata_port_status(int dev, int port); extern block_dev_desc_t sata_dev_desc[]; diff --git a/include/spi.h b/include/spi.h index ffd66478b19..b673be270c8 100644 --- a/include/spi.h +++ b/include/spi.h @@ -30,24 +30,24 @@ #define SPI_XFER_MMAP 0x08 /* Memory Mapped start */ #define SPI_XFER_MMAP_END 0x10 /* Memory Mapped End */ #define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END) -#define SPI_XFER_U_PAGE (1 << 5) +#define SPI_XFER_U_PAGE (1 << 5) /* SPI TX operation modes */ -#define SPI_OPM_TX_QPP 1 << 0 +#define SPI_OPM_TX_QPP (1 << 0) /* SPI RX operation modes */ -#define SPI_OPM_RX_AS 1 << 0 -#define SPI_OPM_RX_DOUT 1 << 1 -#define SPI_OPM_RX_DIO 1 << 2 -#define SPI_OPM_RX_QOF 1 << 3 -#define SPI_OPM_RX_QIOF 1 << 4 -#define SPI_OPM_RX_EXTN SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | \ +#define SPI_OPM_RX_AS (1 << 0) +#define SPI_OPM_RX_DOUT (1 << 1) +#define SPI_OPM_RX_DIO (1 << 2) +#define SPI_OPM_RX_QOF (1 << 3) +#define SPI_OPM_RX_QIOF (1 << 4) +#define SPI_OPM_RX_EXTN (SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | \ SPI_OPM_RX_DIO | SPI_OPM_RX_QOF | \ - SPI_OPM_RX_QIOF + SPI_OPM_RX_QIOF) -/* SPI bus connection options */ -#define SPI_CONN_DUAL_SHARED 1 << 0 -#define SPI_CONN_DUAL_SEPARATED 1 << 1 +/* SPI bus connection options - see enum spi_dual_flash */ +#define SPI_CONN_DUAL_SHARED (1 << 0) +#define SPI_CONN_DUAL_SEPARATED (1 << 1) /* Header byte that marks the start of the message */ #define SPI_PREAMBLE_END_BYTE 0xec diff --git a/include/spi_flash.h b/include/spi_flash.h index 2db53c74c88..408a5b401cd 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -19,6 +19,19 @@ #include <linux/types.h> #include <linux/compiler.h> +#ifndef CONFIG_SF_DEFAULT_SPEED +# define CONFIG_SF_DEFAULT_SPEED 1000000 +#endif +#ifndef CONFIG_SF_DEFAULT_MODE +# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#endif +#ifndef CONFIG_SF_DEFAULT_CS +# define CONFIG_SF_DEFAULT_CS 0 +#endif +#ifndef CONFIG_SF_DEFAULT_BUS +# define CONFIG_SF_DEFAULT_BUS 0 +#endif + /* sf param flags */ #define SECT_4K 1 << 1 #define SECT_32K 1 << 2 |