diff options
Diffstat (limited to 'include')
46 files changed, 1074 insertions, 166 deletions
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h index 2d212c91c5f..2efca1056e9 100644 --- a/include/configs/ADNPESC1.h +++ b/include/configs/ADNPESC1.h @@ -674,5 +674,21 @@ #undef CFG_MEMTEST_END #endif +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "" +#define MTDPARTS_DEFAULT "" +*/ #endif /* __CONFIG_H */ diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index dc01f0cb11e..9a3acfecd51 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -229,17 +229,6 @@ #undef CFG_ENV_IS_IN_FLASH #endif -#ifndef CFG_JFFS2_FIRST_SECTOR -#define CFG_JFFS2_FIRST_SECTOR 0 -#endif -#ifndef CFG_JFFS2_FIRST_BANK -#define CFG_JFFS2_FIRST_BANK 0 -#endif -#ifndef CFG_JFFS2_NUM_BANKS -#define CFG_JFFS2_NUM_BANKS 1 -#endif -#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1) - /* * Memory map */ @@ -314,4 +303,23 @@ #define CFG_HID0_INIT HID0_ICE | HID0_ICFI #define CFG_HID0_FINAL HID0_ICE +/* + * JFFS2 partitions + */ + +/* No command line, one static partition */ +/* +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0x00400000 +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 +*/ + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=alaska-0" +#define MTDPARTS_DEFAULT "mtdparts=alaska-0:4m(user)" +*/ + #endif /* __CONFIG_H */ diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h index 5dd7a7e9f7c..81c8d59e813 100644 --- a/include/configs/BAB7xx.h +++ b/include/configs/BAB7xx.h @@ -28,8 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/processor.h> - #undef DEBUG #define GTREGREAD(x) 0xffffffff /* needed for debug */ @@ -201,8 +199,25 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support + * + * Note: fake mtd_id used, no linux mtd map file + */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=bab7xx-0" +#define MTDPARTS_DEFAULT "mtdparts=bab7xx-0:-(jffs2)" +*/ #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */ diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 61022e8d5ba..776fce5a986 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -377,11 +377,6 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#if 0 /* test-only */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ -#endif - /*----------------------------------------------------------------------- * Environment Variable setup */ @@ -767,9 +762,26 @@ #endif /* CONFIG_NO_SERIAL_EEPROM */ #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -#define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */ -#define CONFIG_JFFS2_NAND_OFF 0 /* start of jffs2 partition */ -#define CONFIG_JFFS2_NAND_SIZE 2*1024*1024 /* size of jffs2 partition */ #define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nand" +#define CONFIG_JFFS2_PART_SIZE 0x00200000 +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support + * + * Note: fake mtd_id used, no linux mtd map file + */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nand0=catcenter" +#define MTDPARTS_DEFAULT "mtdparts=catcenter:2m(nand)" +*/ + #endif /* __CONFIG_H */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 4bb47c324d6..d1498eed3c4 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -242,8 +242,28 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ + +/* + * JFFS2 partitions + */ + +/* No command line, one static partition, use whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ + +/* Use first bank for JFFS2, second bank contains U-Boot. + * + * Note: fake mtd_id's used, no linux mtd map file. + */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=cpci4052-0" +#define MTDPARTS_DEFAULT "mtdparts=cpci4052-0:-(jffs2)" +*/ #if 0 /* Use NVRAM for environment variables */ /*----------------------------------------------------------------------- diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index dee26f87166..29bd3da9883 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -225,8 +225,26 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ +/* + * JFFS2 partitions + */ +/* No command line, one static partition */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ + +/* Use first bank for JFFS2, second bank contains U-Boot. + * + * Note: fake mtd_id's used, no linux mtd map file. + */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=cpci405ab-0" +#define MTDPARTS_DEFAULT "mtdparts=cpci405ab-0:-(jffs2)" +*/ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC32) for environment diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 5c4259df38f..6673073c001 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -247,8 +247,26 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ +/* + * JFFS2 partitions + */ +/* No command line, one static partition */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ + +/* Use first bank for JFFS2, second bank contains U-Boot. + * + * Note: fake mtd_id's used, no linux mtd map file. + */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=cpci405dt-0" +#define MTDPARTS_DEFAULT "mtdparts=cpci405dt-0:-(jffs2)" +*/ #if 0 /* Use NVRAM for environment variables */ /*----------------------------------------------------------------------- diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index fab263b4b66..8bfd0ee820f 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -38,8 +38,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/processor.h> - /* This define must be before the core.h include */ #define CONFIG_CPCI750 1 /* this is an CPCI750 board */ diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h index d6ce8a873b1..e2b4b1da629 100644 --- a/include/configs/DB64360.h +++ b/include/configs/DB64360.h @@ -88,8 +88,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/processor.h> - /* This define must be before the core.h include */ #define CONFIG_DB64360 1 /* this is an DB64360 board */ @@ -219,10 +217,27 @@ ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000;\0" #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ CONFIG_BOOTP_BOOTFILESIZE) +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor1" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ -/* Flash banks JFFS2 should use */ -#define CFG_JFFS2_FIRST_BANK 1 -#define CFG_JFFS2_NUM_BANKS 1 +/* Use first bank for JFFS2, second bank contains U-Boot. + * + * Note: fake mtd_id's used, no linux mtd map file. + */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor1=db64360-1" +#define MTDPARTS_DEFAULT "mtdparts=db64360-1:-(jffs2)" +*/ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h index fb0248102f7..5f541bb9a97 100644 --- a/include/configs/DB64460.h +++ b/include/configs/DB64460.h @@ -28,8 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/processor.h> - /* This define must be before the core.h include */ #define CONFIG_DB64460 1 /* this is an DB64460 board */ @@ -157,10 +155,27 @@ ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000;\0" #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ CONFIG_BOOTP_BOOTFILESIZE) +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor1" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ -/* Flash banks JFFS2 should use */ -#define CFG_JFFS2_FIRST_BANK 1 -#define CFG_JFFS2_NUM_BANKS 1 +/* Use first bank for JFFS2, second bank contains U-Boot. + * + * Note: fake mtd_id's used, no linux mtd map file. + */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor1=db64460-1" +#define MTDPARTS_DEFAULT "mtdparts=db64460-1:-(jffs2)" +*/ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h index 14a09b6dd22..b58846d8316 100644 --- a/include/configs/DK1C20.h +++ b/include/configs/DK1C20.h @@ -536,5 +536,21 @@ #undef CFG_MEMTEST_END #endif +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "" +#define MTDPARTS_DEFAULT "" +*/ #endif /* __CONFIG_H */ diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h index e79eb490f69..3e3803cd235 100644 --- a/include/configs/DK1S10.h +++ b/include/configs/DK1S10.h @@ -545,5 +545,21 @@ #undef CFG_MEMTEST_END #endif +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "" +#define MTDPARTS_DEFAULT "" +*/ #endif /* __CONFIG_H */ diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index 7176905a365..e51d0580477 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -28,8 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/processor.h> - #undef DEBUG #define GTREGREAD(x) 0xffffffff /* needed for debug */ @@ -181,8 +179,23 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 2 /* ! second bank contains U-Boot */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=elppc-0,nor1=elppc-1" +#define MTDPARTS_DEFAULT "mtdparts=elppc-0:-(jffs2),elppc-1:-(user)" +*/ #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */ diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h index 9baf252f611..78e57168854 100644 --- a/include/configs/EVB64260.h +++ b/include/configs/EVB64260.h @@ -28,8 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/processor.h> - #ifndef __ASSEMBLY__ #include <galileo/core.h> #endif diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 91011be3671..933a42c5cef 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -356,4 +356,21 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "" +#define MTDPARTS_DEFAULT "" +*/ + #endif /* __CONFIG_H */ diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index f942e955494..cd21c2dbbef 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -184,8 +184,23 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* one flash only */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=mhpc-0" +#define MTDPARTS_DEFAULT "mtdparts=mhpc-0:-(jffs2)" +*/ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 41a3d394a1f..0af9c68dc81 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -236,8 +236,23 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=mip405-0" +#define MTDPARTS_DEFAULT "mtdparts=mip405-0:-(jffs2)" +*/ /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/ML2.h b/include/configs/ML2.h index c6cc69bc23e..6e54d71e55a 100644 --- a/include/configs/ML2.h +++ b/include/configs/ML2.h @@ -241,9 +241,22 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif -/* JFFS2 stuff */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00080000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=ml2-0" +#define MTDPARTS_DEFAULT "mtdparts=ml2-0:-@512k(jffs2)" +*/ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_NUM_BANKS 1 -#define CFG_JFFS2_FIRST_SECTOR 1 #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index bba476a6a07..9188ae5bbb2 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -278,10 +278,14 @@ #define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ #define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ -#define CFG_JFFS2_FIRST_SECTOR 1 -#define CFG_JFFS2_LAST_SECTOR 27 +/* + * JFFS2 partitions + * + * Note: fake mtd_id used, no linux mtd map file + */ +#define MTDIDS_DEFAULT "nor0=mpc8260ads-0" +#define MTDPARTS_DEFAULT "mtdparts=mpc8260ads-0:-@1m(jffs2)" #define CFG_JFFS2_SORT_FRAGMENTS -#define CFG_JFFS_CUSTOM_PART /* this is stuff came out of the Motorola docs */ #ifndef CFG_LOWBOOT diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index d8e91a53060..0a4b04df4bf 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -573,5 +573,21 @@ #define CFG_PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ #define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO) +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "" +#define MTDPARTS_DEFAULT "" +*/ #endif /* __CONFIG_H */ diff --git a/include/configs/NC650.h b/include/configs/NC650.h index 3acdd77fecc..d24d05f25e1 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -400,9 +400,27 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -#define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */ -#define CONFIG_JFFS2_NAND_OFF 0 /* start of jffs2 partition */ -#define CONFIG_JFFS2_NAND_SIZE 4*1024*1024 /* size of jffs2 partition */ #define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ +/* + * JFFS2 partitions + */ + +/* No command line, one static partition */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nand0" +#define CONFIG_JFFS2_PART_SIZE 0x00400000 +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=nc650-0,nand0=nc650-nand" + +#define MTDPARTS_DEFAULT "mtdparts=nc650-0:1m(kernel1),1m(kernel2)," \ + "2560k(cramfs1),2560k(cramfs2)," \ + "256k(u-boot),256k(env);" \ + "nc650-nand:4m(nand1),28m(nand2)" +*/ + #endif /* __CONFIG_H */ diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 1d12eb4c674..3573b3711dc 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -685,11 +685,26 @@ ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr))) #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -#define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */ -#define CONFIG_JFFS2_NAND_OFF (2 * 1024 * 1024) /* start of jffs2 partition */ -#define CONFIG_JFFS2_NAND_SIZE (1*1024*1024) /* size of jffs2 partition */ #define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nand0" +#define CONFIG_JFFS2_PART_SIZE 0x00100000 +#define CONFIG_JFFS2_PART_OFFSET 0x00200000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nand0=netta-nand" +#define MTDPARTS_DEFAULT "mtdparts=netta-nand:1m@2m(jffs2)" +*/ + /*****************************************************************************/ #define CFG_DIRECT_FLASH_TFTP diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index d8d9632628b..11d6fa767c9 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -193,8 +193,23 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains u-boot */ +/* + * JFFS2 partitions - second bank contains u-boot + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=pmc405-0" +#define MTDPARTS_DEFAULT "mtdparts=pmc405-0:-(jffs2)" +*/ /*----------------------------------------------------------------------- * Environment Variable setup diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index ca0bd12f066..2d89f3ffaf6 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -336,9 +336,19 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 + +/* Reserve 256 kB for Monitor */ #define CFG_FLASH_BASE 0xFFFC0000 #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_LEN (256 * 1024) + +/* Reserve 320 kB for Monitor */ +/* +#define CFG_FLASH_BASE 0xFFFB0000 +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (320 * 1024) +*/ + #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ /* @@ -369,11 +379,6 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#if 0 /* test-only */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ -#endif - /*----------------------------------------------------------------------- * Environment Variable setup */ @@ -770,9 +775,36 @@ #endif /* CONFIG_NO_SERIAL_EEPROM */ #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -#define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */ -#define CONFIG_JFFS2_NAND_OFF 0 /* start of jffs2 partition */ -#define CONFIG_JFFS2_NAND_SIZE 4*1024*1024 /* size of jffs2 partition */ #define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ +/* + * JFFS2 partitions + */ + +/* No command line, one static partition */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nand0" +#define CONFIG_JFFS2_PART_SIZE 0x00400000 +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=PPChameleon-0,nand0=ppchameleonevb-nand" +*/ + +/* 256 kB U-boot image */ +/* +#define MTDPARTS_DEFAULT "mtdparts=PPChameleon-0:1m(kernel1),1m(kernel2)," \ + "1792k(user),256k(u-boot);" \ + "ppchameleonevb-nand:-(nand)" +*/ + +/* 320 kB U-boot image */ +/* +#define MTDPARTS_DEFAULT "mtdparts=PPChameleon-0:1m(kernel1),1m(kernel2)," \ + "1728k(user),320k(u-boot);" \ + "ppchameleonevb-nand:-(nand)" +*/ + #endif /* __CONFIG_H */ diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index c456fbf18b1..d7b093b3cff 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -152,10 +152,22 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/* JFFS2 stuff */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_NUM_BANKS 1 -#define CFG_JFFS2_FIRST_SECTOR 24 +/* + * JFFS2 partitions + */ +/* No command line, one static partition + * use all the space starting at offset 3MB*/ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00300000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=r360-0" +#define MTDPARTS_DEFAULT "mtdparts=r360-0:-@3m(user)" +*/ /* * Low Level Configuration Settings diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index b0e491067a6..4d47d3ee5e5 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -417,4 +417,22 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "" +#define MTDPARTS_DEFAULT "" +*/ + #endif /* __CONFIG_H */ diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index a55297096fa..a170f290e0e 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -186,10 +186,26 @@ #define CFG_DIRECT_FLASH_TFTP #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) -#define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS -#define CFG_JFFS2_FIRST_SECTOR 16 #define CFG_JFFS2_SORT_FRAGMENTS + +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00100000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=rattler-0" +#define MTDPARTS_DEFAULT "mtdparts=rattler-0:-@1m(jffs2)" +*/ #endif /* CFG_CMD_JFFS2 */ #define CFG_MONITOR_BASE TEXT_BASE diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index 195c036bb9e..9ce83b48bf1 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -154,14 +154,32 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> -#define CFG_JFFS_CUSTOM_PART #define CFG_JFFS2_SORT_FRAGMENTS -/* JFFS2 location when using NOR flash */ -#define CFG_JFFS2_BASE (CFG_FLASH_BASE + 0x80000) -#define CFG_JFFS2_SIZE (0x780000) -/* JFFS2 location (in RAM) when using NAND flash */ -#define CFG_JFFS2_RAMBASE 0x400000 -#define CFG_JFFS2_RAMSIZE 0x200000 /* NAND boot partition is 2MiB */ + +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition */ +#undef CONFIG_JFFS2_CMDLINE + +/* +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0x00780000 +#define CONFIG_JFFS2_PART_OFFSET 0x00080000 +*/ + +#define CONFIG_JFFS2_DEV "nand0" +#define CONFIG_JFFS2_PART_SIZE 0x00200000 +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=sixnet-0,nand0=sixnet-nand" +#define MTDPARTS_DEFAULT "mtdparts=sixnet-0:7680k@512k();sixnet-nand:2m(jffs2-nand)" +*/ /* NAND flash support */ #define CONFIG_MTD_NAND_ECC_JFFS2 diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h index 578f152fdeb..f163d003b9a 100644 --- a/include/configs/ZUMA.h +++ b/include/configs/ZUMA.h @@ -28,8 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/processor.h> - #define CFG_GT_6426x GT_64260 /* with a 64260 system controller */ #define CONFIG_ETHER_PORT_MII /* use two MII ports */ #define CONFIG_INTEL_LXT97X /* Intel LXT97X phy */ @@ -115,9 +113,23 @@ CFG_CMD_MII | \ CFG_CMD_DATE) -/* Flash banks JFFS2 should use */ -#define CFG_JFFS2_FIRST_BANK 1 -#define CFG_JFFS2_NUM_BANKS 2 +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2" +#define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)" +*/ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/configs/debris.h b/include/configs/debris.h index a9a24588726..b483f407d2e 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -217,8 +217,27 @@ #define CFG_FLASH_RANGE_SIZE 0x01000000 #define FLASH_BASE0_PRELIM 0x7C000000 /* debris flash */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ + +/* Use first bank for JFFS2, second bank contains U-Boot. + * + * Note: fake mtd_id's used, no linux mtd map file. + */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=debris-0" +#define MTDPARTS_DEFAULT "mtdparts=debris-0:-(jffs2)" +*/ #define CFG_ENV_IS_IN_NVRAM 1 #define CONFIG_ENV_OVERWRITE 1 diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h index c6a028fabde..bdda6292ed7 100644 --- a/include/configs/ep7312.h +++ b/include/configs/ep7312.h @@ -142,9 +142,22 @@ #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */ #define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ -/* Flash banks JFFS2 should use */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_FIRST_SECTOR 2 -#define CFG_JFFS2_NUM_BANKS 1 +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=ep7312-0" +#define MTDPARTS_DEFAULT "mtdparts=ep7312-0:-(jffs2)" +*/ #endif /* __CONFIG_H */ diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 98e1716bf15..8b0afd5a676 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -744,4 +744,22 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "" +#define MTDPARTS_DEFAULT "" +*/ + #endif /* __CONFIG_H */ diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 0d62b9efde5..aadb59f1f11 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -712,4 +712,21 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH*/ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "" +#define MTDPARTS_DEFAULT "" +*/ + #endif /* __CONFIG_H */ diff --git a/include/configs/impa7.h b/include/configs/impa7.h index c187c54d6c3..8b841ff546f 100644 --- a/include/configs/impa7.h +++ b/include/configs/impa7.h @@ -144,9 +144,21 @@ #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */ #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ -/* Flash banks JFFS2 should use */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_FIRST_SECTOR 8 -#define CFG_JFFS2_NUM_BANKS 2 +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00020000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=impA7 NOR Flash Bank #0,nor1=impA7 NOR Flash Bank #1" +#define MTDPARTS_DEFAULT "mtdparts=impA7 NOR Flash Bank #0:-(FileSystem1);impA7 NOR Flash Bank #1:-(FileSystem2)" +*/ #endif /* __CONFIG_H */ diff --git a/include/configs/incaip.h b/include/configs/incaip.h index 7db3744cf45..0f548a52a24 100644 --- a/include/configs/incaip.h +++ b/include/configs/incaip.h @@ -148,8 +148,26 @@ #define CONFIG_NET_MULTI #define CONFIG_INCA_IP_SWITCH_AMDIX -#define CFG_JFFS2_FIRST_BANK 1 -#define CFG_JFFS2_NUM_BANKS 1 +/* + * JFFS2 partitions + */ +/* No command line, one static partition, use all space on the device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor1" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=INCA-IP Bank 0" +#define MTDPARTS_DEFAULT "mtdparts=INCA-IP Bank 0:192k(uboot)," \ + "64k(env)," \ + "768k(linux)," \ + "1m@3m(rootfs)," \ + "768k(linux2)," \ + "3m@5m(rootfs2)" +*/ /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/innokom.h b/include/configs/innokom.h index fce72e112b4..3cb9ebc454c 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -164,14 +164,42 @@ #define CFG_FLASH_BASE PHYS_FLASH_1 - /* - * JFFS2 Partitions + * JFFS2 partitions + * */ -#define CFG_JFFS_CUSTOM_PART 1 /* see board/innokom/flash.c */ -#define CONFIG_MTD_INNOKOM_16MB 1 /* development flash */ -#undef CONFIG_MTD_INNOKOM_64MB /* production flash */ +/* development flash */ +#define CONFIG_MTD_INNOKOM_16MB 1 +#undef CONFIG_MTD_INNOKOM_64MB + +/* production flash */ +/* +#define CONFIG_MTD_INNOKOM_64MB 1 +#undef CONFIG_MTD_INNOKOM_16MB +*/ + +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=innokom-0" +*/ +/* development flash */ +/* +#define MTDPARTS_DEFAULT "mtdparts=innokom-0:256k(uboot),768k(kernel),8m(user),7m(data)" +*/ + +/* production flash */ +/* +#define MTDPARTS_DEFAULT "mtdparts=innokom-0:256k(uboot),768k(kernel),16256k(user1),16256k(user2),32m(data)" +*/ /* * GPIO settings diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h index 067c84623f5..20287674fab 100644 --- a/include/configs/modnet50.h +++ b/include/configs/modnet50.h @@ -165,9 +165,22 @@ #define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ #define CFG_ENV_SIZE 0x4000 /* max size for environment */ -/* Flash banks JFFS2 should use */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_FIRST_SECTOR 8 -#define CFG_JFFS2_NUM_BANKS 2 +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00080000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=modnet50-0" +#define MTDPARTS_DEFAULT "mtdparts=modnet50-0:-@512k(jffs2)" +*/ #endif /* __CONFIG_H */ diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h index 7b4dc92c6c6..9816be8dc4f 100644 --- a/include/configs/mx1fs2.h +++ b/include/configs/mx1fs2.h @@ -87,7 +87,6 @@ #define CONFIG_INITRD_TAG 1 /* send initrd params */ #undef CONFIG_VFD /* do not send framebuffer setup */ -#define CFG_JFFS_CUSTOM_PART /* * Malloc pool need to host env + 128 Kb reserve for other allocations. */ @@ -136,10 +135,6 @@ #define MX1FS2_FLASH_INTERLEAVE 2 /* ... made of 2 chips */ #define MX1FS2_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank*/ #define MX1FS2_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */ -#define MX1FS2_JFFS2_PART0_START 0x10200000 -#define MX1FS2_JFFS2_PART0_SIZE 0x00500000 -#define MX1FS2_JFFS2_PART1_START 0x10700000 -#define MX1FS2_JFFS2_PART1_SIZE 0x00900000 #else #define MX1FS2_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */ #define MX1FS2_FLASH_INTERLEAVE 1 /* ... made of 1 chip */ @@ -167,9 +162,28 @@ * footprint. * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_FIRST_SECTOR 5 -#define CFG_JFFS2_NUM_BANKS 1 + +/* + * JFFS2 partitions + */ +/* No command line, one static partition, whole device */ +/* +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00050000 +*/ + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=mx1fs2-0" + +#ifdef BUS32BIT_VERSION +#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:2m@5m(part0),5m@9m(part1)" +#else +#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:-@320k(jffs2)" +#endif /* * Environment setup. Definitions of monitor location and size with diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 47f78fad4b2..c7916036ff3 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -265,10 +265,23 @@ #define CFG_FLASH_ERASE_TOUT (30*75*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (30*75*CFG_HZ) /* Timeout for Flash Write */ -/* Flash banks JFFS2 should use */ -#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) #define CFG_JFFS2_MEM_NAND -#define CFG_JFFS2_FIRST_BANK 1 /* use flash_info[1] */ -#define CFG_JFFS2_NUM_BANKS 1 + +/* + * JFFS2 partitions + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor1" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor1=omap2420-1" +#define MTDPARTS_DEFAULT "mtdparts=omap2420-1:-(jffs2)" +*/ #endif /* __CONFIG_H */ diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h index 764efdf7206..d7d07a62fc9 100644 --- a/include/configs/sc520_cdp.h +++ b/include/configs/sc520_cdp.h @@ -138,8 +138,22 @@ #define CONFIG_SC520_CDP_USE_SPI /* Store configuration in the SPI part */ #undef CONFIG_SC520_CDP_USE_MW /* Store configuration in the MicroWire part */ #define CONFIG_SPI_X 1 -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* */ + +/* + * JFFS2 partitions + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=SC520CDP Flash Bank #0" +#define MTDPARTS_DEFAULT "mtdparts=SC520CDP Flash Bank #0:-(jffs2)" +*/ /*----------------------------------------------------------------------- * Device drivers diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h index 4114dd323dc..a8e355508b1 100644 --- a/include/configs/sc520_spunk.h +++ b/include/configs/sc520_spunk.h @@ -147,8 +147,23 @@ #endif -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* */ +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=sc520_spunk-0" +#define MTDPARTS_DEFAULT "mtdparts=sc520_spunk-0:-(jffs2)" +*/ /*----------------------------------------------------------------------- * Device drivers diff --git a/include/configs/v37.h b/include/configs/v37.h index 45bc353ad2a..b3c62556d2a 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -87,10 +87,23 @@ CFG_CMD_JFFS2 | \ CFG_CMD_DATE ) - -/* Flash banks JFFS2 should use */ -#define CFG_JFFS2_FIRST_BANK 1 -#define CFG_JFFS2_NUM_BANKS 1 +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor1" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor1=v37-1" +#define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)" +*/ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index 1640163cd4d..72b0a4c8e8b 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -247,4 +247,22 @@ #define VOICEBLUE_LED_REG 0x04030000 +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00040000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=voiceblue-0" +#define MTDPARTS_DEFAULT "mtdparts=voiceblue-0:128k(uboot),64k(env),64k(renv),-(jffs2)" +*/ + #endif /* __CONFIG_H */ diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 847e91a0596..dc702cf4458 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -59,9 +59,23 @@ #define PHYS_FLASH_2 0x00000000 /* Flash Bank #2 */ #define PHYS_FLASH_SECT_SIZE 0x00020000 /* 127 KB sectors */ #define CFG_FLASH_BASE PHYS_FLASH_1 -#define CFG_JFFS2_NUM_BANKS 1 -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS_CUSTOM_PART 1 + +/* + * JFFS2 partitions + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00000000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=xsengine-0" +#define MTDPARTS_DEFAULT "mtdparts=xsengine-0:256k(uboot),1m(kernel1),8m(kernel2)" +*/ /* Environment settings */ #define CONFIG_ENV_OVERWRITE diff --git a/include/jffs2/load_kernel.h b/include/jffs2/load_kernel.h index d8b4240766e..882a80ea3ab 100644 --- a/include/jffs2/load_kernel.h +++ b/include/jffs2/load_kernel.h @@ -25,40 +25,37 @@ * */ -/* this struct is very similar to mtd_info */ -struct part_info { - u32 size; /* Total size of the Partition */ - - /* "Major" erase size for the device. Naïve users may take this - * to be the only erase size available, or may use the more detailed - * information below if they desire - */ - u32 erasesize; +#include <linux/list.h> - /* Where in memory does this partition start? */ - char *offset; +/* mtd device types */ +#define MTD_DEV_TYPE_NOR 0x0001 +#define MTD_DEV_TYPE_NAND 0x0002 +#define MTD_DEV_TYPE(type) ((type == MTD_DEV_TYPE_NAND) ? "nand" : "nor") - /* used by jffs2 set to NULL */ - void *jffs2_priv; - - /* private filed used by user */ - void *usr_priv; +struct mtd_device { + struct list_head link; + struct mtdids *id; /* parent mtd id entry */ + u16 num_parts; /* number of partitions on this device */ + struct list_head parts; /* partitions */ }; -struct part_info* -jffs2_part_info(int part_num); - -struct kernel_loader { - - /* Return true if there is a kernel contained at src */ - int (* check_magic)(struct part_info *part); - - /* load the kernel from the partition part to dst, return the number - * of bytes copied if successful, zero if not */ - u32 (* load_kernel)(u32 *dst, struct part_info *part, const char *kernel_filename); +struct part_info { + struct list_head link; + char *name; /* partition name */ + u8 auto_name; /* set to 1 for generated name */ + u32 size; /* total size of the partition */ + u32 offset; /* offset within device */ + void *jffs2_priv; /* used internaly by jffs2 */ + u32 mask_flags; /* kernel MTD mask flags */ + struct mtd_device *dev; /* parent device */ +}; - /* A brief description of the module (ie, "cramfs") */ - char *name; +struct mtdids { + struct list_head link; + u8 type; /* device type */ + u8 num; /* device number */ + u32 size; /* device size */ + char *mtd_id; /* linux kernel device id */ }; #define ldr_strlen strlen diff --git a/include/linux/list.h b/include/linux/list.h new file mode 100644 index 00000000000..d2a7d43be1d --- /dev/null +++ b/include/linux/list.h @@ -0,0 +1,258 @@ +#ifndef _LINUX_LIST_H +#define _LINUX_LIST_H + +#ifndef ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCH +static inline void prefetch(const void *x) {;} +#endif + +/* + * Simple doubly linked list implementation. + * + * Some of the internal functions ("__xxx") are useful when + * manipulating whole lists rather than single entries, as + * sometimes we already know the next/prev entries and we can + * generate better code by using them directly rather than + * using the generic single-entry routines. + */ + +struct list_head { + struct list_head *next, *prev; +}; + +#define LIST_HEAD_INIT(name) { &(name), &(name) } + +#define LIST_HEAD(name) \ + struct list_head name = LIST_HEAD_INIT(name) + +#define INIT_LIST_HEAD(ptr) do { \ + (ptr)->next = (ptr); (ptr)->prev = (ptr); \ +} while (0) + +/* + * Insert a new entry between two known consecutive entries. + * + * This is only for internal list manipulation where we know + * the prev/next entries already! + */ +static inline void __list_add(struct list_head *new, + struct list_head *prev, + struct list_head *next) +{ + next->prev = new; + new->next = next; + new->prev = prev; + prev->next = new; +} + +/** + * list_add - add a new entry + * @new: new entry to be added + * @head: list head to add it after + * + * Insert a new entry after the specified head. + * This is good for implementing stacks. + */ +static inline void list_add(struct list_head *new, struct list_head *head) +{ + __list_add(new, head, head->next); +} + +/** + * list_add_tail - add a new entry + * @new: new entry to be added + * @head: list head to add it before + * + * Insert a new entry before the specified head. + * This is useful for implementing queues. + */ +static inline void list_add_tail(struct list_head *new, struct list_head *head) +{ + __list_add(new, head->prev, head); +} + +/* + * Delete a list entry by making the prev/next entries + * point to each other. + * + * This is only for internal list manipulation where we know + * the prev/next entries already! + */ +static inline void __list_del(struct list_head *prev, struct list_head *next) +{ + next->prev = prev; + prev->next = next; +} + +/** + * list_del - deletes entry from list. + * @entry: the element to delete from the list. + * Note: list_empty on entry does not return true after this, the entry is in an undefined state. + */ +static inline void list_del(struct list_head *entry) +{ + __list_del(entry->prev, entry->next); + entry->next = (void *) 0; + entry->prev = (void *) 0; +} + +/** + * list_del_init - deletes entry from list and reinitialize it. + * @entry: the element to delete from the list. + */ +static inline void list_del_init(struct list_head *entry) +{ + __list_del(entry->prev, entry->next); + INIT_LIST_HEAD(entry); +} + +/** + * list_move - delete from one list and add as another's head + * @list: the entry to move + * @head: the head that will precede our entry + */ +static inline void list_move(struct list_head *list, struct list_head *head) +{ + __list_del(list->prev, list->next); + list_add(list, head); +} + +/** + * list_move_tail - delete from one list and add as another's tail + * @list: the entry to move + * @head: the head that will follow our entry + */ +static inline void list_move_tail(struct list_head *list, + struct list_head *head) +{ + __list_del(list->prev, list->next); + list_add_tail(list, head); +} + +/** + * list_empty - tests whether a list is empty + * @head: the list to test. + */ +static inline int list_empty(struct list_head *head) +{ + return head->next == head; +} + +static inline void __list_splice(struct list_head *list, + struct list_head *head) +{ + struct list_head *first = list->next; + struct list_head *last = list->prev; + struct list_head *at = head->next; + + first->prev = head; + head->next = first; + + last->next = at; + at->prev = last; +} + +/** + * list_splice - join two lists + * @list: the new list to add. + * @head: the place to add it in the first list. + */ +static inline void list_splice(struct list_head *list, struct list_head *head) +{ + if (!list_empty(list)) + __list_splice(list, head); +} + +/** + * list_splice_init - join two lists and reinitialise the emptied list. + * @list: the new list to add. + * @head: the place to add it in the first list. + * + * The list at @list is reinitialised + */ +static inline void list_splice_init(struct list_head *list, + struct list_head *head) +{ + if (!list_empty(list)) { + __list_splice(list, head); + INIT_LIST_HEAD(list); + } +} + +/** + * list_entry - get the struct for this entry + * @ptr: the &struct list_head pointer. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + */ +#define list_entry(ptr, type, member) \ + ((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member))) + +/** + * list_for_each - iterate over a list + * @pos: the &struct list_head to use as a loop counter. + * @head: the head for your list. + */ +#define list_for_each(pos, head) \ + for (pos = (head)->next, prefetch(pos->next); pos != (head); \ + pos = pos->next, prefetch(pos->next)) +/** + * list_for_each_prev - iterate over a list backwards + * @pos: the &struct list_head to use as a loop counter. + * @head: the head for your list. + */ +#define list_for_each_prev(pos, head) \ + for (pos = (head)->prev, prefetch(pos->prev); pos != (head); \ + pos = pos->prev, prefetch(pos->prev)) + +/** + * list_for_each_safe - iterate over a list safe against removal of list entry + * @pos: the &struct list_head to use as a loop counter. + * @n: another &struct list_head to use as temporary storage + * @head: the head for your list. + */ +#define list_for_each_safe(pos, n, head) \ + for (pos = (head)->next, n = pos->next; pos != (head); \ + pos = n, n = pos->next) + +/** + * list_for_each_entry - iterate over list of given type + * @pos: the type * to use as a loop counter. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry(pos, head, member) \ + for (pos = list_entry((head)->next, typeof(*pos), member), \ + prefetch(pos->member.next); \ + &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member), \ + prefetch(pos->member.next)) + +/** + * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry + * @pos: the type * to use as a loop counter. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry_safe(pos, n, head, member) \ + for (pos = list_entry((head)->next, typeof(*pos), member), \ + n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.next, typeof(*n), member)) + +/** + * list_for_each_entry_continue - iterate over list of given type + * continuing after existing point + * @pos: the type * to use as a loop counter. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry_continue(pos, head, member) \ + for (pos = list_entry(pos->member.next, typeof(*pos), member), \ + prefetch(pos->member.next); \ + &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member), \ + prefetch(pos->member.next)) + +#endif |