diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/udoo.h | 112 |
1 files changed, 23 insertions, 89 deletions
diff --git a/include/configs/udoo.h b/include/configs/udoo.h index 985f306813b..3378b4a601c 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -45,100 +45,34 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc1\0" \ - "splashpos=m,m\0" \ + "console=ttymxc1,115200\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ - "fdt_file=undefined\0" \ + "fdtfile=undefined\0" \ "fdt_addr=0x18000000\0" \ - "boot_fdt=try\0" \ + "fdt_addr_r=0x18000000\0" \ "ip_dyn=yes\0" \ "mmcdev=0\0" \ - "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ - "update_sd_firmware_filename=u-boot.imx\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "if mmc dev ${mmcdev}; then " \ - "if ${get_cmd} ${update_sd_firmware_filename}; then " \ - "setexpr fw_sz ${filesize} / 0x200; " \ - "setexpr fw_sz ${fw_sz} + 1; " \ - "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ - "fi; " \ - "fi\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "loadbootscript=" \ - "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "findfdt=" \ - "if test $board_rev = MX6Q ; then " \ - "setenv fdt_file imx6q-udoo.dtb; fi; " \ - "if test $board_rev = MX6DL ; then " \ - "setenv fdt_file imx6dl-udoo.dtb; fi; " \ - "if test $fdt_file = undefined; then " \ - "echo WARNING: Could not determine dtb to use; fi; \0" - -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" + "mmcrootfstype=ext4\0" \ + "findfdt="\ + "if test ${board_rev} = MX6Q; then " \ + "setenv fdtfile imx6q-udoo.dtb; fi; " \ + "if test ${board_rev} = MX6DL; then " \ + "setenv fdtfile imx6dl-udoo.dtb; fi; " \ + "if test ${fdtfile} = undefined; then " \ + "echo WARNING: Could not determine dtb to use; fi\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "ramdisk_addr_r=0x13000000\0" \ + "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ + BOOTENV + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(SATA, sata, 0) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |