aboutsummaryrefslogtreecommitdiff
path: root/src/arm/xilinx
diff options
context:
space:
mode:
Diffstat (limited to 'src/arm/xilinx')
-rw-r--r--src/arm/xilinx/zynq-7000.dtsi539
-rw-r--r--src/arm/xilinx/zynq-cc108.dts75
-rw-r--r--src/arm/xilinx/zynq-ebaz4205.dts144
-rw-r--r--src/arm/xilinx/zynq-microzed.dts88
-rw-r--r--src/arm/xilinx/zynq-parallella.dts88
-rw-r--r--src/arm/xilinx/zynq-zc702.dts424
-rw-r--r--src/arm/xilinx/zynq-zc706.dts324
-rw-r--r--src/arm/xilinx/zynq-zc770-xm010.dts95
-rw-r--r--src/arm/xilinx/zynq-zc770-xm011.dts64
-rw-r--r--src/arm/xilinx/zynq-zc770-xm012.dts64
-rw-r--r--src/arm/xilinx/zynq-zc770-xm013.dts77
-rw-r--r--src/arm/xilinx/zynq-zed.dts62
-rw-r--r--src/arm/xilinx/zynq-zturn-common.dtsi112
-rw-r--r--src/arm/xilinx/zynq-zturn-v5.dts15
-rw-r--r--src/arm/xilinx/zynq-zturn.dts15
-rw-r--r--src/arm/xilinx/zynq-zybo-z7.dts68
-rw-r--r--src/arm/xilinx/zynq-zybo.dts63
17 files changed, 2317 insertions, 0 deletions
diff --git a/src/arm/xilinx/zynq-7000.dtsi b/src/arm/xilinx/zynq-7000.dtsi
new file mode 100644
index 00000000000..a7db3f3009f
--- /dev/null
+++ b/src/arm/xilinx/zynq-7000.dtsi
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,zynq-7000";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&clkc 3>;
+ clock-latency = <1000>;
+ cpu0-supply = <&regulator_vccpint>;
+ operating-points = <
+ /* kHz uV */
+ 666667 1000000
+ 333334 1000000
+ >;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ clocks = <&clkc 3>;
+ };
+ };
+
+ fpga_full: fpga-full {
+ compatible = "fpga-region";
+ fpga-mgr = <&devcfg>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
+ pmu@f8891000 {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 5 4>, <0 6 4>;
+ interrupt-parent = <&intc>;
+ reg = <0xf8891000 0x1000>,
+ <0xf8893000 0x1000>;
+ };
+
+ regulator_vccpint: fixedregulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCPINT";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ replicator {
+ compatible = "arm,coresight-static-replicator";
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+ };
+ in-ports {
+ /* replicator input port */
+ port {
+ replicator_in_port0: endpoint {
+ remote-endpoint = <&funnel_out_port>;
+ };
+ };
+ };
+ };
+
+ amba: axi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ adc: adc@f8007100 {
+ compatible = "xlnx,zynq-xadc-1.00.a";
+ reg = <0xf8007100 0x20>;
+ interrupts = <0 7 4>;
+ interrupt-parent = <&intc>;
+ clocks = <&clkc 12>;
+ };
+
+ can0: can@e0008000 {
+ compatible = "xlnx,zynq-can-1.0";
+ status = "disabled";
+ clocks = <&clkc 19>, <&clkc 36>;
+ clock-names = "can_clk", "pclk";
+ reg = <0xe0008000 0x1000>;
+ interrupts = <0 28 4>;
+ interrupt-parent = <&intc>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
+
+ can1: can@e0009000 {
+ compatible = "xlnx,zynq-can-1.0";
+ status = "disabled";
+ clocks = <&clkc 20>, <&clkc 37>;
+ clock-names = "can_clk", "pclk";
+ reg = <0xe0009000 0x1000>;
+ interrupts = <0 51 4>;
+ interrupt-parent = <&intc>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
+
+ gpio0: gpio@e000a000 {
+ compatible = "xlnx,zynq-gpio-1.0";
+ #gpio-cells = <2>;
+ clocks = <&clkc 42>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 20 4>;
+ reg = <0xe000a000 0x1000>;
+ };
+
+ i2c0: i2c@e0004000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ clocks = <&clkc 38>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 25 4>;
+ clock-frequency = <400000>;
+ reg = <0xe0004000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@e0005000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ clocks = <&clkc 39>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 48 4>;
+ clock-frequency = <400000>;
+ reg = <0xe0005000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ intc: interrupt-controller@f8f01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xF8F01000 0x1000>,
+ <0xF8F00100 0x100>;
+ };
+
+ L2: cache-controller@f8f02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xF8F02000 0x1000>;
+ interrupts = <0 2 4>;
+ arm,data-latency = <3 2 2>;
+ arm,tag-latency = <2 2 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ mc: memory-controller@f8006000 {
+ compatible = "xlnx,zynq-ddrc-a05";
+ reg = <0xf8006000 0x1000>;
+ };
+
+ uart0: serial@e0000000 {
+ compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+ status = "disabled";
+ clocks = <&clkc 23>, <&clkc 40>;
+ clock-names = "uart_clk", "pclk";
+ reg = <0xE0000000 0x1000>;
+ interrupts = <0 27 4>;
+ };
+
+ uart1: serial@e0001000 {
+ compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+ status = "disabled";
+ clocks = <&clkc 24>, <&clkc 41>;
+ clock-names = "uart_clk", "pclk";
+ reg = <0xE0001000 0x1000>;
+ interrupts = <0 50 4>;
+ };
+
+ spi0: spi@e0006000 {
+ compatible = "xlnx,zynq-spi-r1p6";
+ reg = <0xe0006000 0x1000>;
+ status = "disabled";
+ interrupt-parent = <&intc>;
+ interrupts = <0 26 4>;
+ clocks = <&clkc 25>, <&clkc 34>;
+ clock-names = "ref_clk", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@e0007000 {
+ compatible = "xlnx,zynq-spi-r1p6";
+ reg = <0xe0007000 0x1000>;
+ status = "disabled";
+ interrupt-parent = <&intc>;
+ interrupts = <0 49 4>;
+ clocks = <&clkc 26>, <&clkc 35>;
+ clock-names = "ref_clk", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ qspi: spi@e000d000 {
+ compatible = "xlnx,zynq-qspi-1.0";
+ reg = <0xe000d000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 19 4>;
+ clocks = <&clkc 10>, <&clkc 43>;
+ clock-names = "ref_clk", "pclk";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gem0: ethernet@e000b000 {
+ compatible = "xlnx,zynq-gem", "cdns,gem";
+ reg = <0xe000b000 0x1000>;
+ status = "disabled";
+ interrupts = <0 22 4>;
+ clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gem1: ethernet@e000c000 {
+ compatible = "xlnx,zynq-gem", "cdns,gem";
+ reg = <0xe000c000 0x1000>;
+ status = "disabled";
+ interrupts = <0 45 4>;
+ clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ smcc: memory-controller@e000e000 {
+ compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+ reg = <0xe000e000 0x0001000>;
+ status = "disabled";
+ clock-names = "memclk", "apb_pclk";
+ clocks = <&clkc 11>, <&clkc 44>;
+ ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+ 0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+ 0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ nfc0: nand-controller@0,0 {
+ compatible = "arm,pl353-nand-r2p1";
+ reg = <0 0 0x1000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ sdhci0: mmc@e0100000 {
+ compatible = "arasan,sdhci-8.9a";
+ status = "disabled";
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&clkc 21>, <&clkc 32>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 24 4>;
+ reg = <0xe0100000 0x1000>;
+ };
+
+ sdhci1: mmc@e0101000 {
+ compatible = "arasan,sdhci-8.9a";
+ status = "disabled";
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&clkc 22>, <&clkc 33>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 47 4>;
+ reg = <0xe0101000 0x1000>;
+ };
+
+ slcr: slcr@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
+ reg = <0xF8000000 0x1000>;
+ ranges;
+ clkc: clkc@100 {
+ #clock-cells = <1>;
+ compatible = "xlnx,ps7-clkc";
+ fclk-enable = <0>;
+ clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+ "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+ "dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+ "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+ "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+ "dma", "usb0_aper", "usb1_aper", "gem0_aper",
+ "gem1_aper", "sdio0_aper", "sdio1_aper",
+ "spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+ "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+ "gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+ "dbg_trc", "dbg_apb";
+ reg = <0x100 0x100>;
+ };
+
+ rstc: rstc@200 {
+ compatible = "xlnx,zynq-reset";
+ reg = <0x200 0x48>;
+ #reset-cells = <1>;
+ syscon = <&slcr>;
+ };
+
+ pinctrl0: pinctrl@700 {
+ compatible = "xlnx,pinctrl-zynq";
+ reg = <0x700 0x200>;
+ syscon = <&slcr>;
+ };
+ };
+
+ dmac_s: dma-controller@f8003000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xf8003000 0x1000>;
+ interrupt-parent = <&intc>;
+ /*
+ * interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+ * "dma4", "dma5", "dma6", "dma7";
+ */
+ interrupts = <0 13 4>,
+ <0 14 4>, <0 15 4>,
+ <0 16 4>, <0 17 4>,
+ <0 40 4>, <0 41 4>,
+ <0 42 4>, <0 43 4>;
+ #dma-cells = <1>;
+ clocks = <&clkc 27>;
+ clock-names = "apb_pclk";
+ };
+
+ devcfg: devcfg@f8007000 {
+ compatible = "xlnx,zynq-devcfg-1.0";
+ reg = <0xf8007000 0x100>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 8 4>;
+ clocks = <&clkc 12>;
+ clock-names = "ref_clk";
+ syscon = <&slcr>;
+ };
+
+ global_timer: timer@f8f00200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0xf8f00200 0x20>;
+ interrupts = <1 11 0x301>;
+ interrupt-parent = <&intc>;
+ clocks = <&clkc 4>;
+ };
+
+ ttc0: timer@f8001000 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
+ compatible = "cdns,ttc";
+ clocks = <&clkc 6>;
+ reg = <0xF8001000 0x1000>;
+ };
+
+ ttc1: timer@f8002000 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
+ compatible = "cdns,ttc";
+ clocks = <&clkc 6>;
+ reg = <0xF8002000 0x1000>;
+ };
+
+ scutimer: timer@f8f00600 {
+ interrupt-parent = <&intc>;
+ interrupts = <1 13 0x301>;
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xf8f00600 0x20>;
+ clocks = <&clkc 4>;
+ };
+
+ usb0: usb@e0002000 {
+ compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+ status = "disabled";
+ clocks = <&clkc 28>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 21 4>;
+ reg = <0xe0002000 0x1000>;
+ phy_type = "ulpi";
+ };
+
+ usb1: usb@e0003000 {
+ compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+ status = "disabled";
+ clocks = <&clkc 29>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 44 4>;
+ reg = <0xe0003000 0x1000>;
+ phy_type = "ulpi";
+ };
+
+ watchdog0: watchdog@f8005000 {
+ clocks = <&clkc 45>;
+ compatible = "cdns,wdt-r1p2";
+ interrupt-parent = <&intc>;
+ interrupts = <0 9 1>;
+ reg = <0xf8005000 0x1000>;
+ timeout-sec = <10>;
+ };
+
+ etb@f8801000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0xf8801000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+ };
+
+ tpiu@f8803000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0xf8803000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+ };
+
+ funnel@f8804000 {
+ compatible = "arm,coresight-static-funnel", "arm,primecell";
+ reg = <0xf8804000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+ /* funnel output ports */
+ out-ports {
+ port {
+ funnel_out_port: endpoint {
+ remote-endpoint =
+ <&replicator_in_port0>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port@0 {
+ reg = <0>;
+ funnel0_in_port0: endpoint {
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel0_in_port1: endpoint {
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ funnel0_in_port2: endpoint {
+ };
+ };
+ /* The other input ports are not connect to anything */
+ };
+ };
+
+ ptm@f889c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf889c000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ cpu = <&cpu0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
+ };
+ };
+ };
+
+ ptm@f889d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf889d000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ cpu = <&cpu1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/src/arm/xilinx/zynq-cc108.dts b/src/arm/xilinx/zynq-cc108.dts
new file mode 100644
index 00000000000..8b9ab9bba23
--- /dev/null
+++ b/src/arm/xilinx/zynq-cc108.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CC108 board DTS
+ *
+ * (C) Copyright 2007-2018 Xilinx, Inc.
+ * (C) Copyright 2007-2013 Michal Simek
+ * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Xilinx CC108 board";
+ compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&sdhci1 {
+ status = "okay";
+ broken-cd ;
+ wp-inverted ;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy1>;
+};
diff --git a/src/arm/xilinx/zynq-ebaz4205.dts b/src/arm/xilinx/zynq-ebaz4205.dts
new file mode 100644
index 00000000000..53fa6dbfd8f
--- /dev/null
+++ b/src/arm/xilinx/zynq-ebaz4205.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Ebang EBAZ4205";
+ compatible = "ebang,ebaz4205", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+ fclk-enable = <8>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "mii";
+ phy-handle = <&phy>;
+
+ /* PHY clock */
+ assigned-clocks = <&clkc 18>;
+ assigned-clock-rates = <25000000>;
+
+ phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&nfc0 {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ };
+};
+
+&pinctrl0 {
+ pinctrl_gpio0_default: gpio0-default {
+ mux {
+ groups = "gpio0_20_grp", "gpio0_32_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_20_grp", "gpio0_32_grp";
+ io-standard = <3>;
+ slew-rate = <0>;
+ };
+
+ conf-pull-up {
+ pins = "MIO20", "MIO32";
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_2_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_2_grp";
+ io-standard = <3>;
+ slew-rate = <0>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "gpio0_34_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "gpio0_34_grp";
+ io-standard = <3>;
+ slew-rate = <0>;
+ bias-high-impedance;
+ bias-pull-up;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_4_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_4_grp";
+ io-standard = <3>;
+ slew-rate = <0>;
+ };
+
+ conf-rx {
+ pins = "MIO25";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO24";
+ bias-disable;
+ };
+ };
+};
+
+&smcc {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/src/arm/xilinx/zynq-microzed.dts b/src/arm/xilinx/zynq-microzed.dts
new file mode 100644
index 00000000000..6ed84fb1590
--- /dev/null
+++ b/src/arm/xilinx/zynq-microzed.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Avnet MicroZed board";
+ compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&pinctrl0 {
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO29", "MIO31", "MIO36";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+ "MIO35", "MIO37", "MIO38", "MIO39";
+ bias-disable;
+ };
+ };
+};
diff --git a/src/arm/xilinx/zynq-parallella.dts b/src/arm/xilinx/zynq-parallella.dts
new file mode 100644
index 00000000000..54592aeb92b
--- /dev/null
+++ b/src/arm/xilinx/zynq-parallella.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * Derived from zynq-zed.dts:
+ *
+ * Copyright (C) 2011 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ * Copyright (C) 2013 Xilinx
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Adapteva Parallella board";
+ compatible = "adapteva,parallella", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&clkc {
+ fclk-enable = <0xf>;
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ /* Marvell 88E1318 */
+ compatible = "ethernet-phy-id0141.0e90",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ device_type = "ethernet-phy";
+ marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
+ <0x3 0x11 0xfff0 0xa>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ isl9305: isl9305@68 {
+ compatible = "isil,isl9305";
+ reg = <0x68>;
+
+ regulators {
+ dcd1 {
+ regulator-name = "VDD_DSP";
+ regulator-always-on;
+ };
+ dcd2 {
+ regulator-name = "1P35V";
+ regulator-always-on;
+ };
+ ldo1 {
+ regulator-name = "VDD_ADJ";
+ };
+ ldo2 {
+ regulator-name = "VDD_GPIO";
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&sdhci1 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/src/arm/xilinx/zynq-zc702.dts b/src/arm/xilinx/zynq-zc702.dts
new file mode 100644
index 00000000000..6efdbca9d3e
--- /dev/null
+++ b/src/arm/xilinx/zynq-zc702.dts
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Xilinx ZC702 board";
+ compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ i2c0 = &i2c0;
+ serial0 = &uart1;
+ mmc0 = &sdhci0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ switch-14 {
+ label = "sw14";
+ gpios = <&gpio0 12 0>;
+ linux,code = <108>; /* down */
+ wakeup-source;
+ autorepeat;
+ };
+ switch-13 {
+ label = "sw13";
+ gpios = <&gpio0 14 0>;
+ linux,code = <103>; /* up */
+ wakeup-source;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-ds23 {
+ label = "ds23";
+ gpios = <&gpio0 10 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&amba {
+ ocm: sram@fffc0000 {
+ compatible = "mmio-sram";
+ reg = <0xfffc0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xfffc0000 0x10000>;
+ ocm-sram@0 {
+ reg = <0x0 0x10000>;
+ };
+ };
+};
+
+&can0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem0_default>;
+
+ ethernet_phy: ethernet-phy@7 {
+ reg = <7>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio0 50 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 51 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ i2c-mux@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ adv7511: hdmi-tx@39 {
+ compatible = "adi,adv7511";
+ reg = <0x39>;
+ adi,input-depth = <8>;
+ adi,input-colorspace = "yuv422";
+ adi,input-clock = "1x";
+ adi,input-style = <3>;
+ adi,input-justification = "right";
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ hwmon@34 {
+ compatible = "ti,ucd9248";
+ reg = <0x34>;
+ };
+ hwmon@35 {
+ compatible = "ti,ucd9248";
+ reg = <0x35>;
+ };
+ hwmon@36 {
+ compatible = "ti,ucd9248";
+ reg = <0x36>;
+ };
+ };
+ };
+};
+
+&pinctrl0 {
+ pinctrl_can0_default: can0-default {
+ mux {
+ function = "can0";
+ groups = "can0_9_grp";
+ };
+
+ conf {
+ groups = "can0_9_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO46";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO47";
+ bias-disable;
+ };
+ };
+
+ pinctrl_gem0_default: gem0-default {
+ mux {
+ function = "ethernet0";
+ groups = "ethernet0_0_grp";
+ };
+
+ conf {
+ groups = "ethernet0_0_grp";
+ slew-rate = <0>;
+ io-standard = <4>;
+ };
+
+ conf-rx {
+ pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+ bias-disable;
+ low-power-enable;
+ };
+
+ mux-mdio {
+ function = "mdio0";
+ groups = "mdio0_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_gpio0_default: gpio0-default {
+ mux {
+ function = "gpio0";
+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+ "gpio0_13_grp", "gpio0_14_grp";
+ };
+
+ conf {
+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+ "gpio0_13_grp", "gpio0_14_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-pull-up {
+ pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+ bias-pull-up;
+ };
+
+ conf-pull-none {
+ pins = "MIO7", "MIO8";
+ bias-disable;
+ };
+ };
+
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_10_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_10_grp";
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_50_grp", "gpio0_51_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_50_grp", "gpio0_51_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_2_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_2_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "gpio0_0_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "gpio0_0_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ mux-wp {
+ groups = "gpio0_15_grp";
+ function = "sdio0_wp";
+ };
+
+ conf-wp {
+ groups = "gpio0_15_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_10_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO49";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO48";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO29", "MIO31", "MIO36";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+ "MIO35", "MIO37", "MIO38", "MIO39";
+ bias-disable;
+ };
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+};
diff --git a/src/arm/xilinx/zynq-zc706.dts b/src/arm/xilinx/zynq-zc706.dts
new file mode 100644
index 00000000000..77943c16d33
--- /dev/null
+++ b/src/arm/xilinx/zynq-zc706.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Xilinx ZC706 board";
+ compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ i2c0 = &i2c0;
+ serial0 = &uart1;
+ mmc0 = &sdhci0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem0_default>;
+
+ ethernet_phy: ethernet-phy@7 {
+ reg = <7>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+
+ i2c-mux@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ adv7511: hdmi-tx@39 {
+ compatible = "adi,adv7511";
+ reg = <0x39>;
+ adi,input-depth = <8>;
+ adi,input-colorspace = "yuv422";
+ adi,input-clock = "1x";
+ adi,input-style = <3>;
+ adi,input-justification = "evenly";
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ ucd90120@65 {
+ compatible = "ti,ucd90120";
+ reg = <0x65>;
+ };
+ };
+ };
+};
+
+&pinctrl0 {
+ pinctrl_gem0_default: gem0-default {
+ mux {
+ function = "ethernet0";
+ groups = "ethernet0_0_grp";
+ };
+
+ conf {
+ groups = "ethernet0_0_grp";
+ slew-rate = <0>;
+ io-standard = <4>;
+ };
+
+ conf-rx {
+ pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+ low-power-enable;
+ bias-disable;
+ };
+
+ mux-mdio {
+ function = "mdio0";
+ groups = "mdio0_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_gpio0_default: gpio0-default {
+ mux {
+ function = "gpio0";
+ groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+ };
+
+ conf {
+ groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-pull-up {
+ pins = "MIO46", "MIO47";
+ bias-pull-up;
+ };
+
+ conf-pull-none {
+ pins = "MIO7";
+ bias-disable;
+ };
+ };
+
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_10_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_10_grp";
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_2_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_2_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "gpio0_14_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "gpio0_14_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ mux-wp {
+ groups = "gpio0_15_grp";
+ function = "sdio0_wp";
+ };
+
+ conf-wp {
+ groups = "gpio0_15_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_10_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO49";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO48";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO29", "MIO31", "MIO36";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+ "MIO35", "MIO37", "MIO38", "MIO39";
+ bias-disable;
+ };
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+};
diff --git a/src/arm/xilinx/zynq-zc770-xm010.dts b/src/arm/xilinx/zynq-zc770-xm010.dts
new file mode 100644
index 00000000000..0dd352289a4
--- /dev/null
+++ b/src/arm/xilinx/zynq-zc770-xm010.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Xilinx ZC770 XM010 board";
+ compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ i2c0 = &i2c0;
+ serial0 = &uart1;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@7 {
+ reg = <7>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+ flash@1 {
+ compatible = "sst25wf080", "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "data";
+ reg = <0x0 0x100000>;
+ };
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
diff --git a/src/arm/xilinx/zynq-zc770-xm011.dts b/src/arm/xilinx/zynq-zc770-xm011.dts
new file mode 100644
index 00000000000..56732e8f6ca
--- /dev/null
+++ b/src/arm/xilinx/zynq-zc770-xm011.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM011 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Xilinx ZC770 XM011 board";
+ compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
+
+ aliases {
+ i2c0 = &i2c1;
+ serial0 = &uart1;
+ spi0 = &spi0;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ usb_phy1: phy1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy1>;
+};
diff --git a/src/arm/xilinx/zynq-zc770-xm012.dts b/src/arm/xilinx/zynq-zc770-xm012.dts
new file mode 100644
index 00000000000..d2359b789eb
--- /dev/null
+++ b/src/arm/xilinx/zynq-zc770-xm012.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM012 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Xilinx ZC770 XM012 board";
+ compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ serial0 = &uart1;
+ spi0 = &spi1;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom0: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom1: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/src/arm/xilinx/zynq-zc770-xm013.dts b/src/arm/xilinx/zynq-zc770-xm013.dts
new file mode 100644
index 00000000000..38d96adc870
--- /dev/null
+++ b/src/arm/xilinx/zynq-zc770-xm013.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Xilinx ZC770 XM013 board";
+ compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem1;
+ i2c0 = &i2c1;
+ serial0 = &uart0;
+ spi1 = &spi0;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&gem1 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@7 {
+ reg = <7>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ si570: clock-generator@55 {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x55>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+ eeprom: eeprom@2 {
+ compatible = "atmel,at25";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ size = <8192>;
+ address-width = <16>;
+ pagesize = <32>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/src/arm/xilinx/zynq-zed.dts b/src/arm/xilinx/zynq-zed.dts
new file mode 100644
index 00000000000..6a5a93aa655
--- /dev/null
+++ b/src/arm/xilinx/zynq-zed.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Avnet ZedBoard board";
+ compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ mmc0 = &sdhci0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
diff --git a/src/arm/xilinx/zynq-zturn-common.dtsi b/src/arm/xilinx/zynq-zturn-common.dtsi
new file mode 100644
index 00000000000..dfb1fbafe3a
--- /dev/null
+++ b/src/arm/xilinx/zynq-zturn-common.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
+ * Copyright (C) 2017 Alexander Graf <agraf@suse.de>
+ *
+ * Based on zynq-zed.dts which is:
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ *
+ */
+
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ compatible = "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ serial1 = &uart0;
+ mmc0 = &sdhci0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ usr-led1 {
+ label = "usr-led1";
+ gpios = <&gpio0 0x0 0x1>;
+ default-state = "off";
+ };
+
+ usr-led2 {
+ label = "usr-led2";
+ gpios = <&gpio0 0x9 0x1>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ key {
+ label = "K1";
+ gpios = <&gpio0 0x32 0x1>;
+ linux,code = <0x66>;
+ wakeup-source;
+ autorepeat;
+ };
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&can0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ stlm75@49 {
+ status = "okay";
+ compatible = "lm75";
+ reg = <0x49>;
+ };
+
+ accelerometer@53 {
+ compatible = "adi,adxl345";
+ reg = <0x53>;
+ interrupt-parent = <&intc>;
+ interrupts = <0x0 0x1e 0x4>;
+ };
+};
diff --git a/src/arm/xilinx/zynq-zturn-v5.dts b/src/arm/xilinx/zynq-zturn-v5.dts
new file mode 100644
index 00000000000..536632a09a2
--- /dev/null
+++ b/src/arm/xilinx/zynq-zturn-v5.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+/include/ "zynq-zturn-common.dtsi"
+
+/ {
+ model = "Zynq Z-Turn MYIR Board V5";
+ compatible = "myir,zynq-zturn-v5", "xlnx,zynq-7000";
+};
+
+&gem0 {
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0x3>;
+ };
+};
diff --git a/src/arm/xilinx/zynq-zturn.dts b/src/arm/xilinx/zynq-zturn.dts
new file mode 100644
index 00000000000..620b24a25e0
--- /dev/null
+++ b/src/arm/xilinx/zynq-zturn.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+/include/ "zynq-zturn-common.dtsi"
+
+/ {
+ model = "Zynq Z-Turn MYIR Board";
+ compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
+};
+
+&gem0 {
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+};
diff --git a/src/arm/xilinx/zynq-zybo-z7.dts b/src/arm/xilinx/zynq-zybo-z7.dts
new file mode 100644
index 00000000000..7b87e10d395
--- /dev/null
+++ b/src/arm/xilinx/zynq-zybo-z7.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "zynq-7000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Digilent Zybo Z7 board";
+ compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-ld4 {
+ label = "zynq-zybo-z7:green:ld4";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb_phy0: phy0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
diff --git a/src/arm/xilinx/zynq-zybo.dts b/src/arm/xilinx/zynq-zybo.dts
new file mode 100644
index 00000000000..755f6f109d5
--- /dev/null
+++ b/src/arm/xilinx/zynq-zybo.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Digilent Zybo board";
+ compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ mmc0 = &sdhci0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ usb_phy0: phy0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio0 46 1>;
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <50000000>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 09:42:44 +0000