aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-09doc: Add zynq fragment to git-mailrc fileMichal Simek
This is a MIME GnuPG-signed message. If you see this text, it means that your E-mail or Usenet software does not support MIME signed messages. The Internet standard for MIME PGP messages, RFC 2015, was published in 1996. To open this message correctly you will need to install E-mail or Usenet software that supports modern Internet standards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-09ARM: OMAP4/5: Change omap4_sdp/panda and omap5_uevm maintainerLokesh Vutla
Updating omap4_sdp/panda and omap5_uevm maintainer. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: R Sricharan <r.sricharan@ti.com>
2014-07-09Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2014-07-09mx6: soc: Update the comments of set_ldo_voltage()Fabio Estevam
Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces set_ldo_voltage() function that can be used to set the voltages of any of the three LDO regulators controlled by the PMU_REG_CORE register. Prior to this commit there was a single set_vddsoc() which only configured the VDDSOC regulator. Update the comments to align with the new set_ldo_voltage() implementation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-07-09MX6: Correct calculation of PLL_SYSAndre Renaud
DIV_SELECT is used as Fout = Fin * div_select / 2.0, so we should do the shift after the multiply to avoid rounding errors Signed-off-by: Andre Renaud <andre@bluewatersys.com>
2014-07-09ARM: m53evk: Update default environmentLothar Rubusch
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Lothar Rubusch <lothar@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
2014-07-09ARM: m53evk: Adjust mtdparts settingsMarek Vasut
Adjust the mtdparts settings to allow for alternative boot images and for using UBI. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2014-07-09ARM: m53evk: add needed commands and optionsMarek Vasut
- "env ask", "env grep" and "setexpr" are needed for commissioning - add support for ext4 file systems - adjust default environment to use ext4 commands - add write support for (V)FAT and EXT4 - add bitmap and splashscreen support - print timestamp information for images Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2014-07-09ARM: m28evk: Update default environmentLothar Rubusch
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Lothar Rubusch <lothar@denx.de>
2014-07-09ARM: m28evk: Adjust mtdpartsMarek Vasut
Adjust the mtdparts to also consider factory-programmed config block. Signed-off-by: Marek Vasut <marex@denx.de>
2014-07-09ARM: m28evk: add needed commands and optionsMarek Vasut
- "env ask", "env grep" and "setexpr" are needed for commissioning - add support for ext4 file systems - adjust default environment to use ext4 commands - add write support for (V)FAT and EXT4 - add bitmap and splashscreen support - print timestamp information for images Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2014-07-07Merge branch 'tom' of git://git.denx.de/u-boot-x86Tom Rini
2014-07-07TI:omap3: enable CONFIG_CMD_DHCP for omap3_beagleTyler Baker
The following patch re-enables the dhcp functionality on omap3_beagle. It was removed with df4dbb5df6ab1c1d27b3fd4acbaad69b47095daf when omap3_beagle was converted to use ti_omap3_common.h. I have tested beagleboard and beagleboard-xm with this patch and confirmed dhcp is working. Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
2014-07-07kmake: include DTB section into u-boot.bin if CONFIG_OF_EMBED enabledAlexey Ignatov
Fixes a bug when objcopy doesn't put .dtb.init.rodata section to resulting u-boot.bin, so u-boot was unable to find embedded DTB.
2014-07-07git-mailrc: Add sunxi custodians.Ian Campbell
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-07-07fit: make sha256 support optionalDirk Eibach
sha256 has some beefy memory footprint. Make it optional for constrained systems. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: gdsys: Remove commands to reduce footprintDirk Eibach
Commit "2842c1c fit: add sha256 support" badly increased memory footprint, so some of our boards did not build anymore. Since monitor base must not be changed I removed some commands to save memory. Maybe making sha256 optional for fit would be an option for the future since it really has some beefy footprint. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: iocon: Modify iocon hardware startupDirk Eibach
To avoid peer "ChReceivePathStatus"-messages on iocon startup, initialize PHYs as soon as possible. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: gdsys: Enable scrambling on DP501Dirk Eibach
For proper displayport performance, scrambling has to be enabled, but is turned off on DP501 by default. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: gdsys: Make gdsys osd hardware detection more robustDirk Eibach
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: gdsys: Configure bridge on DP501 to support DDC onlyDirk Eibach
The I2C bridge on DP501 supports EDID, MCCS and HDCP by default. Allow EDID only to avoid I2C address conflicts. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: gdsys: Increase iocon and dlv10g version stringDirk Eibach
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: gdsys: Fix dlvision-10g I2C configurationDirk Eibach
PPC4xx config options were not complete. ICS8N3QV01 and SIL1178 needed some more configuration. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07i2c: IHS I2C master driverDirk Eibach
IHS I2C master support was merely a hack in the osd driver. Now it is a proper u-boot I2C framework driver, supporting the v2.00 master features. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: iocon: Support DisplayPort hardwareDirk Eibach
There is a new iocon hardware flavor, supporting DisplayPort finally. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: controlcenterd: Use new API for setting i2c busDirk Eibach
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API changeDirk Eibach
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07board: controlcenterd: Fix pci accessDirk Eibach
readl was called with values instead of pointers to these values. Why this ever did work is a mystery... Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07blackfin, powerpc: remove redundant definitions of ARRAY_SIZEMasahiro Yamada
Since ARRAY_SIZE macro is defined in include/common.h, re-defining it in arch-specific files is redundant. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Sonic Zhang <sonic.zhang@analog.com>
2014-07-07blackfin: Add more dcache functionsVasili Galka
Add invalidate_dcache_range() and flush_dcache_range() for the blackfin architecture. Such functions already exist on this arch with different names, so just forward the call. This fixes the build of bf609-ezkit board as it uses drivers/net/designware.c which requires the above functions. Cc: Sonic Zhang <sonic.adi@gmail.com>, Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vasili Galka <vvv444@gmail.com>
2014-07-07blackfin: Fix warning about undefined functionVasili Galka
get_sclk() was not defined in bfin_wdt.c, include the corresponding header. Cc: Sonic Zhang <sonic.adi@gmail.com> Signed-off-by: Vasili Galka <vvv444@gmail.com>
2014-07-07m68k: Fix incorrect memory access on M5235Vasili Galka
The csarX and cscrX registers in the fbcs_t struct are 16-bit for CONFIG_M5235 and 32-bit wide otherwise. The code in cpu_init.c accessed them always as 32-bit, effectively creating a wrong memory access on M5235. Fixed that by choosing out_be16/out_be32 depending on whether CONFIG_M5235 is defined or not. Cc: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Vasili Galka <vvv444@gmail.com>
2014-07-07m68k: Fix bug, "address of" operator was forgottenVasili Galka
in_be16() shall be passed a pointer to register and not its value. This is clearly a typo resulting in a wrong memory access, so fix it. Cc: Alison Wang <b18965@freescale.com>, Jason Jin <Jason.jin@freescale.com> Signed-off-by: Vasili Galka <vvv444@gmail.com>
2014-07-07mpc8xx: remove spc1920 board supportMasahiro Yamada
This board is old enough and has no maintainer. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-07mpc8xx: remove v37 board supportMasahiro Yamada
This board is old enough and has no maintainer. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-07mpc8xx: remove fads board supportMasahiro Yamada
These boards are old enough and have no maintainers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-07mpc8xx: remove netta, netta2, netphone board supportMasahiro Yamada
These boards are old enough and have no maintainers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-07mpc8xx: remove rbc823 board supportMasahiro Yamada
This board is old enough and has no maintainer. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-07mpc8xx: remove RPXlite_dw, quantum board supportMasahiro Yamada
These boards are old enough and have no maintainers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-07mpc8xx: remove qs850, qs860t board supportMasahiro Yamada
These boards are old enough and have no maintainers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-07tpm: don't use unneeded double bracketsJeroen Hofstee
clang is tempted to inteprete such a condition as a assignment as well. Since it isn't don't use double brackets. cc: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-07vcma9/lowlevel_init.S: trivial: terminate commentJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-07README: document CONFIG_ENV_IS_IN_SPI_FLASHWu, Josh
The option can be used to save the environment in spi flash. Implementation code is already exist in command/env_sf.c. But the documentation is missing. This patch add the details for this option to the README file. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-07-07env_fat: use get_device_and_partition() during env save and loadWu, Josh
Use get_device_and_partition() is better since: 1. It will call the device initialize function internally. So we can remove the mmc intialization code to save many lines. 2. It is used by fatls/fatload/fatwrite. So saveenv & load env should use it too. 3. It can parse the "D:P", "D", "D:", "D:auto" string to get correct device and partition information by run-time. Also we remove the FAT_ENV_DEVICE and FAT_ENV_PART. We use a string: FAT_ENV_DEVICE_AND_PART. For at91sam9m10g45ek, it is "0". That means use device 0 and if: a)device 0 has no partition table, use the whole device as a FAT file system. b)device 0 has partittion table, use the partition #1. Refer to the commit: 10a37fd7a4 for details of device & partition string. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2014-07-07am43xx: Tune the system to avoid DSS underflowsCooper Jr., Franklin
* This is done by limiting the ARM's bandwidth and setting DSS priority in the EMIF controller to ensure underflows do not occur.
2014-07-07am43xx: Update EMIF DDR3 Configuration for AM43x GPFranklin S. Cooper Jr
* Boot failures have been discovered due to a combination of routing issues and non optimal ddr3 timings in the EMIF * Since ddr3 timings are different after significant board layout changes different timings are required for alpha, beta and production boards. Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
2014-07-07doc/README.falcon: Clarify steps slightly.Tom Rini
Make it clear that we need to load a legacy-formatted (aka uImage) kernel into memory as well as the DT if used before using "spl export". Cc: Yebio Mesfin <ymesfin@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2014-07-07board: ti: dra7xx: add mux data for UART3Felipe Balbi
J6 EVM can be built with UART3 as console, but currently there's nothing muxing UART3 correctly. Likely this only works because, based on commit log, author was only testing with UART3 boot and - I assume - ROM code leave UART3 correctly muxed in that case. If we want to boot from MMC and still use UART3 as console, then we need to mux those signals correctly. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-07build: define CPU only when arch/${ARCH}/cpu/${CPU} existsMasahiro Yamada
The directory arch/${ARCH}/cpu/${CPU} does not exist in avr32, blackfin, microblaze, nios2, openrisc, sandbox, x86. These architectures have only one CPU type. Defining CPU should not be required for such architectures. This commit allows cpu field (= the 3rd field of boards.cfg) to be kept blank. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2014-07-07README: document the CONFIG_ENV_IS_IN_FAT optionWu, Josh
In README file, add document for the missing configuration option: CONFIG_ENV_IS_IN_FAT. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 07:52:43 +0000