aboutsummaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)Author
2021-05-31riscv: cpu: fu740: clear feature disable CSRGreen Wan
Clear feature disable CSR to turn on all features of hart. The detail is specified at section, 'SiFive Feature Disable CSR', in user manual https://sifive.cdn.prismic.io/sifive/aee0dd4c-d156-496e-a6c4-db0cf54bbe68_sifive_U74MC_rtl_full_20G1.03.00_manual.pdf Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-31board: sifive: add HiFive Unmatched board supportGreen Wan
Add defconfig and board support for HiFive Unmatched. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-31riscv: dts: add SiFive Unmatched board supportGreen Wan
Add dts files for SiFive Unmatched board. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-31riscv: dts: add fu740 supportGreen Wan
Add dts support for fu740. The HiFive Unmatched support is based on fu740 cpu and drivers in following patch set. Signed-off-by: Green Wan <green.wan@sifive.com> [greentime.hu: set fu740 speed to 1.2GHz] Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-31drivers: clk: add fu740 supportGreen Wan
Add fu740 support. One abstract layer is added for supporting multiple chips such as fu540 and fu740. Signed-off-by: Green Wan <green.wan@sifive.com>
2021-05-31riscv: cpu: fu740: Add support for cpu fu740Green Wan
Add SiFive fu740 cpu to support RISC-V arch Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-24treewide: Convert macro and uses of __section(foo) to __section("foo")Marek Behún
This commit does the same thing as Linux commit 33def8498fdd. Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19riscv: Drop USE_SPL_FIT_GENERATORBin Meng
Now that we have switched to binman to generate u-boot.itb for all RISC-V boards, USE_SPL_FIT_GENERATOR is no longer needed and can be dropped. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19riscv: ae350: Switch to use binman to generate u-boot.itbBin Meng
Use the new BINMAN_STANDALONE_FDT option for AE350 based SPL defconfigs, so that binman is now used to generate u-boot.itb. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-19riscv: qemu: Switch to use binman to generate u-boot.itbBin Meng
By utilizing the newly introduced BINMAN_STANDALONE_FDT option, along with a new dedicated device tree source file for the QEMU virt target used for binman only, we can now use binman to generate u-boot.itb. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19riscv: dts: Sort build targets in alphabetical orderBin Meng
Sort the RISC-V DTS build targets by their Kconfig target names in alphabetical order. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19riscv: sifive: unleashed: Switch to use binman to generate u-boot.itbBin Meng
At present SiFive Unleashed board uses the Makefile to create the FIT, using USE_SPL_FIT_GENERATOR, which is deprecated as per the Makefile warning. Update to use binman instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-17riscv: Group assembly optimized implementation of memory routines into a submenuBin Meng
Currently all assembly optimized implementation of memory routines show up at the top level of the RISC-V architecture Kconfig menu. Let's group them together into a submenu. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-17riscv: Fix memmove and optimise memcpy when misalignBin Meng
At present U-Boot SPL fails to boot on SiFive Unleashed board, due to a load address misaligned exception happens when loading the FIT image in spl_load_simple_fit(). The exception happens in memmove() which is called by fdt_splice_(). Commit 8f0dc4cfd106 introduces an assembly version of memmove but it does take misalignment into account (it checks if length is a multiple of machine word size but pointers need also be aligned). As a result it will generate misaligned load/store for the majority of cases and causes significant performance regression on hardware that traps misaligned load/store and emulate them using firmware. The current behaviour of memcpy is that it checks if both src and dest pointers are co-aligned (aka congruent modular SZ_REG). If aligned, it will copy data word-by-word after first aligning pointers to word boundary. If src and dst are not co-aligned, however, byte-wise copy will be performed. This patch was taken from the Linux kernel patch [1], which has not been applied at the time being. It fixes the memmove and optimises memcpy for misaligned cases. It will first align destination pointer to word-boundary regardless whether src and dest are co-aligned or not. If they indeed are, then wordwise copy is performed. If they are not co-aligned, then it will load two adjacent words from src and use shifts to assemble a full machine word. Some additional assembly level micro-optimisation is also performed to ensure more instructions can be compressed (e.g. prefer a0 to t6). With this patch, U-Boot boots again on SiFive Unleashed board. [1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/ Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset") Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-17riscv: Fix arch_fixup_fdt always failing without /chosenSean Anderson
If /chosen was missing, chosen_offset would never get updated with the new /chosen node. This would cause fdt_setprop_u32 to fail. This patch fixes this by setting chosen_offset. In addition, log any errors from setting boot-hartid as well. Fixes: 5370478d1c7 ("riscv: Add boot hartid to device tree") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2021-05-17riscv: Split SiFive CLINT support between SPL and U-Boot properBin Meng
At present there is only one Kconfig option CONFIG_SIFIVE_CLINT to control the enabling of SiFive CLINT support in both SPL (M-mode) and U-Boot proper (S-mode). So for a typical SPL config that the SiFive CLINT driver is enabled in both SPL and U-Boot proper, that means the S-mode U-Boot tries to access the memory-mapped CLINT registers directly, instead of the normal 'rdtime' instruction. This was not a problem before, as the hardware does not forbid the access from S-mode. However this becomes an issue now with OpenSBI commit 8b569803475e ("lib: utils/sys: Add CLINT memregion in the root domain") that the SiFive CLINT register space is protected by PMP for M-mode access only. U-Boot proper does not boot any more with the latest OpenSBI, that access exceptions are fired forever from U-Boot when trying to read the timer value via the SiFive CLINT driver in U-Boot. To solve this, we need to split current SiFive CLINT support between SPL and U-Boot proper, using 2 separate Kconfig options. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-05-14Revert "riscv: cpu: fu740: clear feature disable CSR"Bin Meng
This reverts commit bc8bbb77f74f21582b3bfd790334397757f88575. This commit breaks U-Boot booting on SiFive Unleashed board, as there is no such CSR on U54 core. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-05-14riscv: Don't reserve AI ram in k210 dtsSean Anderson
It is no longer necessary to disallow ai ram, since it is enabled by the sram driver. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-14riscv: k210: Use AI as the parent clock of aisram, not PLL1Sean Anderson
Testing showed that disabling AI while leaving PLL1 enabled disabled the aisram. This suggests that AI is a more appropriate clock for that ram bank. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-14riscv: k210: Rename airam to aisramSean Anderson
This is more consistent with the naming of other ram banks, and matches what Linux is doing. Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-14riscv: Enable some devices pre-relocationSean Anderson
These devices are necessary for the clock driver, which is required by the sram driver, to run pre-relocation. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-05riscv: cpu: fu740: clear feature disable CSRGreen Wan
Clear feature disable CSR to turn on all features of hart. The detail is specified at section, 'SiFive Feature Disable CSR', in user manual https://sifive.cdn.prismic.io/sifive/aee0dd4c-d156-496e-a6c4-db0cf54bbe68_sifive_U74MC_rtl_full_20G1.03.00_manual.pdf Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-05riscv: cpu: Add callback to init each coreGreen Wan
Add a callback harts_early_init() to start.S to allow different riscv hart perform setup code for each hart as early as possible. Since all the harts enter the callback, they must be able to run the same setup. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-22lmb: move CONFIG_LMB in KconfigPatrick Delaunay
Migrate CONFIG_LMB in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-20Add support for stack-protectorJoel Peshkin
Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-08riscv: dts: mpfs-icicle-kit: Drop 'clock-frequency' in the uart nodesBin Meng
The uart nodes already provide <clocks> property for the driver to dynamically calculate the correct clock frequency. There is no need to keep the hard-coded <clock-frequency> property. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com> Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2021-04-08riscv: assembler versions of memcpy, memmove, memsetHeinrich Schuchardt
Provide optimized versions of memcpy(), memmove(), memset() copied from the Linux kernel. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08riscv: simplify longjmpHeinrich Schuchardt
The value returned by setjmp must be nonzero. If zero is passed as parameter it must be replaced by 1. This patch reduces the code size a bit. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08riscv: sifive: Rename fu540 board to unleashedBin Meng
In preparation to add SiFive Unmatched board support, let's rename the existing fu540 board to unleashed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08riscv: Add watchdog bindings for the k210Sean Anderson
This adds the necessary bindings. Most of them are already there. Signed-off-by: Sean Anderson <seanga2@gmail.com> Acked-by: Rick Chen <rick@andestech.com>
2021-03-27cpu: Rename SPL_CPU_SUPPORT to SPL_CPUSimon Glass
The _SUPPORT suffix is from an earlier time and interferes with use of the CONFIG_IS_ENABLED() macro. Rename the option to drop the suffix. Tidy up the TODO that prompted this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-02-25riscv: k210: Enable QSPI for spi3Sean Anderson
This device has four IOs connected to the SPI flash. Add the appropriate bindings. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Liang <ycliang@andestech.com>
2021-02-15Merge branch '2021-02-02-drop-asm_global_data-when-unused'Tom Rini
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-03riscv: Change phys_addr_t and phys_size_t to 64-bitBin Meng
phys_addr_t and phys_size_t are currently defined as `unsigned long`, but RV32 supports 34-bit physical address, hence both phys_addr_t and phys_size_t should be defined to 64-bit using `unsigned long long`. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2021-02-03riscv: Adjust board_get_usable_ram_top() for 32-bitBin Meng
When testing QEMU RISC-V 'virt' machine with a 2 GiB memory configuration, it was discovered gd->ram_top is assigned to value zero in setup_dest_addr(). While gd->ram_top should not be declared as type `unsigned long`, which will be updated in a future patch, the current logic in board_get_usable_ram_top() can be updated to cover both 64-bit and 32-bit RISC-V. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-18riscv: dts: Add device tree for Microchip Icicle KitPadmarao Begari
Add device tree for Microchip PolarFire SoC Icicle Kit. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2021-01-18riscv: Add DMA 64-bit address supportPadmarao Begari
dma_addr_t holds any valid DMA address. If the DMA API only uses 32/64-bit addresses, dma_addr_t need only be 32/64 bits wide. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-01-05Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into nextTom Rini
Driver model: make some udevice fields private Driver model: Rename U_BOOT_DEVICE et al. dtoc: Tidy up and add more tests ns16550 code clean-up x86 and sandbox minor fixes for of-platdata dtoc prepration for adding build-time instantiation
2021-01-05Merge tag 'v2021.01-rc5' into nextTom Rini
Prepare v2021.01-rc5 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()Simon Glass
In the spirit of using the same base name for all of these related macros, rename this to have the operation at the end. This is not widely used so the impact is fairly small. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18riscv: Add device tree bindings for SPISean Anderson
This patch adds bindings for the MMC slot and SPI flash on the Sipeed Maix Bit. Signed-off-by: Sean Anderson <seanga2@gmail.com> Acked-by: Rick Chen <rick@andestech.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18spi: dw: Add SoC-specific compatible stringsSean Anderson
This adds SoC-specific compatible strings to all users of the designware spi device. This will allow for the correct driver to be selected for each device. Where it is publicly documented, a compatible string for the specific device version has also been added. Devices without publicly-documented device versions include MSCC SoCs, and Arc Socs. All compatible strings except those for SoCFPGAs and some of the versioned strings have been taken from Linux. Since SSI_MAX_XFER_SIZE is determined at runtime, this is not strictly necessary. However, it is a good cleanup and brings things closer to Linux. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-14riscv: Complete efi header for RV32/64Leo Yu-Chi Liang
This patch depends on Atish's patch. (https://patchwork.ozlabs.org/project/uboot/patch/20201013192331.3236458-1-atish.patra@wdc.com/) Add fields to complete Optional Header "Data Directories" specified in the document. (https://docs.microsoft.com/en-us/windows/win32/debug/pe-format) Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com> Cc: rick@andestech.com Cc: alankao@andestech.com Cc: atish.patra@wdc.com Cc: xypron.glpk@gmx.de Cc: bmeng.cn@gmail.com Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-12-14riscv: Fix efi header size for RV32Leo Yu-Chi Liang
This patch depends on Atish's patch. (https://patchwork.ozlabs.org/project/uboot/patch/20201013192331.3236458-1-atish.patra@wdc.com/) Modify the size of the Optional Header "Windows-Specific Fields" to fit with the specification. (https://docs.microsoft.com/en-us/windows/win32/debug/pe-format) Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com> Cc: rick@andestech.com Cc: alankao@andestech.com Cc: atish.patra@wdc.com Cc: xypron.glpk@gmx.de Cc: bmeng.cn@gmail.com
2020-12-14riscv: Fix efi header for RV32Atish Patra
RV32 should use PE32 format instead of PE32+ as the efi header format. This requires following changes 1. A different header magic value 2. An additional parameter known as BaseOfData. Currently, it is set to zero in absence of any usage. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-12-14riscv: reset after crashHeinrich Schuchardt
If an exception occurs on ARM or x86, we call panic() which will try to reset the board. Do the same on RISC-V. To avoid -Werror=format-zero-length move a '\n' to the string passed to panic. We don't need a message here as depending on CONFIG_PANIC_HANG we will either see ### ERROR ### Please RESET the board ### or resetting ... as next message. Reviewed-by: Rick Chen <rick@andestech.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-14riscv: fix the wrong swap value registerBrad Kim
Not s2 register, t1 register is correct Fortunately, it works because t1 register has a garbage value Signed-off-by: Brad Kim <brad.kim@semifive.com> Reviewed-by: Lukas Auer <lukas@auer.io> Reviewed-by: Leo Liang <ycliang@andestech.com>
2020-12-13dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-28riscv: sifive/fu540: kconfig: Enable support for Opencores I2C controllerPragnesh Patel
Enable support for SiFive FU540 Opencores I2C master controller. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 08:31:13 +0000