u-boot.git - U-Boot bootloader

Age	Commit message (Expand)	Author
2019-05-05	board: toradex: drop support.arm maintainer email	Marcel Ziswiler
2019-04-25	board: toradex: tdx-cfg-block: add new skus	Marcel Ziswiler
2019-04-25	board: toradex: tdx-cfg-block: clean-up sku handling	Marcel Ziswiler
2019-04-25	colibri-imx6ull: migrate usb to using driver model	Marcel Ziswiler
2019-04-25	colibri-imx6ull: migrate mmc to using driver model	Marcel Ziswiler
2019-04-25	colibri-imx6ull: migrate pinctrl and regulators to dtb/dm	Marcel Ziswiler
2019-04-25	board: imx6ull: Add disable PMIC_STBY_REQ	Philippe Schenker
2019-04-25	colibri-imx6ull: fix ethernet phy power on	Marcel Ziswiler
2019-04-25	colibri-imx6ull: set module variant depending on config block	Stefan Agner
2019-04-25	tdx-cfg-block: simplify i.MX 6 module detection	Stefan Agner
2019-04-25	tdx-cfg-block: add support for new colibri iMX6ull skus	Gerard Salvatella
2019-04-25	colibri_vf: fix tab vs. spaces	Marcel Ziswiler
2019-04-13	tdx-cfg-block: fix off by one issue	Marcel Ziswiler
2019-04-13	toradex: common: unify behaviour when config block is missing	Bhuvanchandra DV
2019-04-13	toradex: configblock: add an -y parameter to 'cfgblock create’	Dominik Sliwa
2019-04-13	colibri_vf: use leveling evaluated by DDR validation tools	Stefan Agner
2019-04-13	colibri_vf: adjust timing according to data sheet	Stefan Agner
2019-04-13	colibri_vf: sync the board info message	Bhuvanchandra DV
2019-04-13	colibri_vf: migrate fec, esdhc, nfc and usb to driver model	Marcel Ziswiler
2019-04-13	colibri_vf: migrate pinctrl and regulators to dtb/dm	Marcel Ziswiler
2019-04-13	ARM: dts: colibri_vf: update device trees	Marcel Ziswiler
2019-04-13	board: colibri_imx6: check for and report ecc errors in fuses	Gerard Salvatella
2019-04-13	colibri_imx6: added nreset gpio on reboot	Gerard Salvatella
2019-04-13	colibri_imx6: use SDP if USB serial downloader has been used	Stefan Agner
2019-04-13	toradex: colibri_imx6: overwrite CMA memory set in device tree	Bhuvanchandra DV
2019-04-13	colibri_imx6: revert fuse value set in mfgr_fuse	Max Krummenacher
2019-04-13	colibri_imx6: change pmic fusing according to hw 1.1 requirements	Max Krummenacher
2019-04-13	colibri imx6: disable ri and dcd irq in uarts	Max Krummenacher
2019-04-13	colibri imx6: pf0100: reorder and cleanup message printing	Max Krummenacher
2019-04-13	colibri_imx6: unify sd/mmc drive strenght with linux kernel settings	Max Krummenacher
2019-04-13	colibri_imx6: print also 64-bit IT	Max Krummenacher
2019-04-13	colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP	Max Krummenacher
2019-04-13	colibri_imx6: migrate usb to using driver model	Marcel Ziswiler
2019-04-13	colibri_imx6: migrate mmc to using driver model	Marcel Ziswiler
2019-04-13	colibri_imx6: migrate i2c to using driver model	Marcel Ziswiler
2019-04-13	colibri_imx6: clean-up and migrate gpios to using driver model	Marcel Ziswiler
2019-04-13	colibri_imx6: migrate to using device tree	Marcel Ziswiler
2019-04-13	colibri_imx6: get rid of obsolete nospl configurations	Marcel Ziswiler
2019-04-13	board: apalis_imx6: check for and report ecc errors in fuses	Gerard Salvatella
2019-04-13	apalis_imx6: use SDP if USB serial downloader has been used	Stefan Agner
2019-04-13	apalis_imx6: revert fuse value set in mfgr_fuse	Max Krummenacher
2019-04-13	apalis_imx6: disable ri and dcd irq in uarts	Max Krummenacher
2019-04-13	apalis_imx6: pf0100: reorder and cleanup message printing	Marcel Ziswiler
2019-04-13	apalis_imx6: unify sd/mmc drive strength with linux kernel settings	Max Krummenacher
2019-04-13	apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP	Marcel Ziswiler
2019-04-13	apalis_imx6: migrate usb to using driver model	Marcel Ziswiler
2019-04-13	apalis_imx6: migrate mmc and sata to using driver model	Marcel Ziswiler
2019-04-13	apalis_imx6: migrate i2c to using driver model	Marcel Ziswiler
2019-04-13	apalis_imx6: clean-up and migrate gpios to using driver model	Marcel Ziswiler
2019-04-13	apalis_imx6: migrate to using device tree	Marcel Ziswiler