aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2023-10-12ad401: enable USB stackAlexey Romanov
Currently we have all drivers for use USB stack on A1-series SoC's. Let's enable USB options for the Amlogic AD401 reference A1 SoC board. Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231005085434.74755-9-avromanov@salutedevices.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-11configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-11configs: Make TI_SECURE_DEVICE default for K3Andrew Davis
All K3 boards now are secure by default, instead of setting this in each defconfig, make it implied by the ARCH config. The only exception is IOT2050, which I do not believe will have any problems with being a TI_SECURE_DEVICE, but for now turn it off to keep its config the same. Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Tom Rini <trini@konsulko.com>
2023-10-11configs: am65x: Merge the HS and non-HS defconfigsAndrew Davis
K3 devices have runtime type board detection. Make the default defconfig include the secure configuration. Then remove the HS specific config. Non-HS devices will continue to boot due to runtime device type detection. Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-10-11board: xen: introduce virtio-blk supportAndrii Chepurnyi
Added new xenguest_arm64_virtio_defconfig which enables support for virtio-blk using various types of transport like virtio-pci, vrtio-mmio. Currently supported: up to 2 PCI host bridges and 10 MMIO devices. Note: DT parsing code was partly taken from pci-uclass.c Limitation: All memory regions should be below 4GB address space. Signed-off-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
2023-10-11Merge tag 'fsl-qoirq-2023-10-10' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq Drop legacy PPA secure FW support support for MC reserved memory reset the FLSHxCR1 registers for nxp_fspi
2023-10-10configs: layerscape: delete defconfigs using legacy PPA secure FWLaurentiu Tudor
PPA was a secure firmware developed in-house which is no longer supported and replaced by TF-A quite some years ago. This makes the defconfigs that make use of PPA obsolete, so remove them. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> [Merged part 1 and part 2] Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-10-09ARM: vexpress_ca9x4: Add missing flash width config optionPatryk Biel
Allow for a proper configuration of CFI flash banks avaialble on the vexpress_ca9x4 board. Without this option, the CFI flash incorrectly detects that the board has two banks of 32MB flash devices, while in reality, the board provides two flash banks, each with 64MB size. As a result, it becomes impossible to e.g. to save u-boot env in flash. According to device tree for this board and its implementation in QEMU, the CFI width should be set to 32 bits. After applying this fix, CFI flash will correctly detect both flash banks each with a size of 64MB. As as result the functionality of e.g. saving u-boot env will work correctly. Tested on QEMU 6.2.0. Cc: Kristian Amlie <kristian.amlie@northern.tech> Signed-off-by: Patryk Biel <pbiel7@gmail.com> Reviewed-by: Kristian Amlie <kristian.amlie@northern.tech>
2023-10-08Merge tag 'u-boot-rockchip-20231007' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Add Board: rk3568 Bananapi R2Pro; - Update pcie bifurcation support; - dwc_eth_qos controller support for rk3568 and rk3588; - Compressed binary support for U-Boot on rockchip platform; - dts and config updates for different board and soc; [ trini: Fix conflict on include/spl.h ] Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-07rockchip: rk356x: Enable poweroff commandJonas Karlman
With PMIC_RK8XX, SYSRESET and CMD_POWEROFF options enabled it is possible to power down a board using the poweroff command and turn the board back on using a power button. Enable the poweroff command on RK356x boards that have a button wired to PMIC pwron. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07configs: rockchip: rk3308: enable CONFIG_OF_LIBFDT_OVERLAYFUKAUMI Naoki
enable CONFIG_OF_LIBFDT_OVERLAY and use it on Radxa ROCK Pi S. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
2023-10-07configs: rockchip: rk3308: use CONFIG_DEFAULT_FDT_FILEFUKAUMI Naoki
all rk3308 boards should use their own dtb file. also, change fdt_addr_r to avoid following error: "ERROR: Did not find a cmdline Flattened Device Tree" it happens on Radxa ROCK Pi S (256MB/512MB) with kernel built from Radxa BSP. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
2023-10-07arm: dts: rockchip: rock-5b: add support for PCIe3 and NVMeFUKAUMI Naoki
this patch adds support for PCIe3 (M.2 M key) and enables NVMe. => pci BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 00.00.00 0x1d87 0x3588 Bridge device 0x04 01.00.00 0x10ec 0x8125 Network controller 0x00 02.00.00 0x1d87 0x3588 Bridge device 0x04 03.00.00 0x1179 0x011a Mass storage controller 0x08 => nvme scan => nvme info Device 0: Vendor: 0x1179 Rev: AGHA4101 Prod: 79CA20WPKRYN Type: Hard Disk Capacity: 488386.3 MB = 476.9 GB (1000215216 x 512) Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07configs: rockchip: rock-pi-s: use default bootdelay (2s)FUKAUMI Naoki
align with other boards. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07configs: rockchip: add DOS_PARTITION to RK3308 boards defconfigMassimo Pegorer
Without DOS_PARTITION support U-Boot is not able to boot an OS stored into an SD card with MBR partitions table. This is still a quite common case so add DOS_PARTITION (only for U-Boot proper build) to Rockchip RK3308 EVB, Radxa ROCK Pi S and Firefly roc-rk3308-cc boards: they are the only RK boards missing of DOS_PARTITION. Reported-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com> Signed-off-by: Massimo Pegorer <massimo.pegorer+oss@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07board: rockchip: Add Bananapi R2Pro BoardFrank Wunderlich
Add Bananapi R2 Pro board. tested: - sdcard - both front usb-ports - sata - wan-port lan-ports are connected to mt7531 switch where driver needs to be separated from mtk ethernet-driver. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
2023-10-07configs: rockchip: Enable ethernet driver on RK3588 boardsJonas Karlman
Enable DWC_ETH_QOS_ROCKCHIP and related PHY driver on RK3588 boards that have an enabled gmac node and drop ETH_DESIGNWARE and GMAC_ROCKCHIP for remaining RK3588 boards. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07configs: rockchip: Enable ethernet driver on RK356x boardsJonas Karlman
Enable DWC_ETH_QOS_ROCKCHIP and related PHY driver on RK356x boards that have an enabled gmac node. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07rockchip: board: Add minimal generic RK3566/RK3568 boardJonas Karlman
Add a minimal generic RK3566/RK3568 board that only have eMMC and SDMMC enabled. This defconfig can be used to boot from eMMC or SD-card on most RK3566/RK3568 boards that follow reference board design. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07rockchip: rk3568-nanopi-r5: Enable PCIe on NanoPi R5C and R5SJonas Karlman
Enable missing PCIe Kconfig options now that PCIe bifurcation is fixed to make use of the two on-board RTL8125B and the M.2 slot on NanoPi R5C and NanoPi R5S. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07rockchip: rk3568-nanopi-r5: Update defconfig for NanoPi R5C and R5SJonas Karlman
Update and sync Kconfig options for NanoPi R5C and NanoPi R5S with other RK3568 boards. SPL_FIT_SIGNATURE is enabled to add a checksum validation of the FIT payload, also add LEGACY_IMAGE_FORMAT to keep boot scripts working. OF_SPL_REMOVE_PROPS, SPL_DM_SEQ_ALIAS and SPL_PINCTRL change ensure pinctrl for eMMC, SD-card and UART2 is applied in SPL. MMC_HS200_SUPPORT and SPL counterpart is enabled to speed up eMMC load times from on-board eMMC 5.1 modules. Drop remaining unused or unsupported options to sync with other RK3568 boards. Also sync device tree from linux v6.4 and drop u-boot,spl-boot-order and use the default from rk356x-u-boot.dtsi. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-06spl: Rename SYS_SPL_ARGS_ADDR to SPL_PAYLOAD_ARGS_ADDRSimon Glass
Rename this so that SPL is first, as per U-Boot convention. Also add PAYLOAD_ since this is where in memory the parameters for the payload have been stored. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-10-06spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...Simon Glass
We like to put the SPL first so it is clear that it relates to SPL. Rename various malloc-related options which have crept in, to stick to this convention. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-10-05Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
+ ae350: modify memory layout and target name + ae350: use generic RISC-V timer driver in S-mode + Support bootstage report for RISC-V + Support C extension exception command for RISC-V + Add Starfive timer support
2023-10-04configs: j721e: Remove HBMC_AM654 configNeha Malcom Francis
Kernel commit d93036b47f35 ("arm64: dts: ti: k3-j721e-mcu_wakeup: Add HyperBus node") was merged to kernel without its dependent patch [1]. Similar fix is needed in U-Boot, and hbmc currently breaks boot. Till this gets fixed in U-Boot, disable the config by default so that the hbmc probe that happens in board/ti/j721e/evm.c will not take place and lead to boot failure. [1] https://lore.kernel.org/all/20230424184810.29453-1-afd@ti.com/ Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
2023-10-04Merge tag 'u-boot-stm32-20231004' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm STM32 MCU: _ alignment with kernel DT v6.5 for stm32f429 and stm32f746 _ rework way of displaying ST logo for stm32f746-disco and stm32f769-disco STM32 MPU: _ alignment with kernel DT v6.6-rc1 _ add RNG support for stm32mp13 _ add USB, USB boot and stm32prog command support for stm32mp13 _ add support of USART1 clock for stm32mp1 _ only print RAM and board code with SPL_DISPLAY_PRINT flag for stm32mp1 _ rename update_sf to dh_update_sd_to_sf and add dh_update_sd_to_emmc for stm32mp15xx DHCOR [ Fix merge conflict at board/st/common/stm32mp_dfu.c ] Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-04configs: stm32mp13: activate command stm32progPatrick Delaunay
Activate the command stm32prog with CONFIG_CMD_STM32MPROG. The CONFIG_SET_DFU_ALT_INFO is also activated to support the required weak functions for the DFU virtual backen defined in board/st/common/stm32mp_dfu.c. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04configs: stm32mp13: Enable USB related flagsPatrice Chotard
Enable USB related flags. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04configs: default activate CONFIG_RNG_STM32 for STM32MP13x platformsGatien Chevallier
Default embed this configuration. If OP-TEE PTA RNG is exposed, it means that the RNG is managed by the secure world. Therefore, the RNG node should be disabled in the device tree as an access would be denied by the hardware firewall. Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04rng: stm32: rename STM32 RNG driverGatien Chevallier
Rename the RNG driver as it is usable by other STM32 platforms than the STM32MP1x ones. Rename CONFIG_RNG_STM32MP1 to CONFIG_RNG_STM32 Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> Reviewed-by: Grzegorz Szymaszek <gszymaszek@short.pl> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04configs: stm32f769-disco: Enable VIDEO_LOGO flagPatrice Chotard
The patch removes the legacy mode of displaying the ST logo and adopts the approach introduced by the commit 284b08fb51b6 ("board: stm32mp1: add splash screen with stmicroelectronics logo"). Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04board: stm32f746-disco: refactor the display of the ST logoDario Binacchi
The patch removes the legacy mode of displaying the ST logo and adopts the approach introduced by the commit 284b08fb51b6 ("board: stm32mp1: add splash screen with stmicroelectronics logo"). It was necessary to use a specific logo for the stm32f746-disco board. Furthermore, the previous version didn't properly center the logo, hiding its upper part. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04configs: stm32f746-disco: limit resolution to 480x272Dario Binacchi
The patch fixes the y-resolution, which was causing the creation of a framebuffer larger than actually needed, resulting in memory waste. Fixes: cc1b0e7b8e55b ("board: Add display to STM32F746 SoC discovery board") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04configs: sifive: enable poweroff command on UnmatchedHeinrich Schuchardt
Powering off the SiFive HiFive Unmatched board is supported both via the SBI and GPIO sysreset drivers. See device-tree entry compatible = "gpio-poweroff". Enable the poweroff command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04configs: andes: rearrange SPL mode memory layoutRandolph
Unify the memory layout for u-boot SPL mode Add "CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS" Signed-off-by: Randolph <randolph@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04configs: andes: add vender prefix for target nameRandolph
Modify "CONFIG_TARGET_AE350" to "CONFIG_TARGET_ANDES_AE350" Signed-off-by: Randolph <randolph@andestech.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-10-02Merge branch 'next_pinctrl_sync' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-sh - pinctrl re-sync for Renesas chips
2023-10-02configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-01ARM: renesas: Align env eMMC device number with Linux 6.5.3 DT changes on ↵Marek Vasut
R-Car Gen3 Salvator-X Set U-Boot environment storage eMMC device number to 0, to match the new additions to DT /aliases node pulled in alongside Linux 6.5.3 DT synchronization. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01ARM: renesas: Enable DM_ETH_PHY on 64-bit R-Car boardsMarek Vasut
Enable DM_ETH_PHY to correctly release the PHY on these boards from reset. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-30Convert CFG_SYS_UBOOT_START to KconfigJesse Taube
Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*") renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately, this meant that the value was no longer available to the Makefile. This caused imxrt to fail to boot. All the other boards that used this variable were unaffected because they were using the default value which is CONFIG_TEXT_BASE. This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default value to CONFIG_TEXT_BASE. Suggested-by: Marek Vasut <marek.vasut+renesas@gmail.com> Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-28configs: iot2050: Disable CONFIG_CONSOLE_MUXJan Kiszka
We only have serial as console option, and leaving this on turns on SYS_CONSOLE_IS_IN_ENV which is also not true for these devices, leaving an ugly In: No input devices available! Out: No output devices available! Err: No error devices available! behind. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-09-28smegw01: Fix inverted CONFIG_SYS_BOOT_LOCKED logicEduard Strehlau
CONFIG_SYS_BOOT_LOCKED means that a restricted boot environment will be used. In this case, hab_auth_img_or_fail should be called to prevent U-Boot to continue running when the fitImage authentication fails. Fix the logic accordingly. Additionally, select CONFIG_SYS_BOOT_LOCKED by default. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-23smegw01: Use CONFIG_SYS_LOAD_ADDR for loading fitImageEduard Strehlau
Set CONFIG_SYS_LOAD_ADDR=0x88000000 and use this address for loading fitImage. Also pass the standard CONFIG_BOOTFILE option to indicate the fitImage file. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-22configs: am65x_evm_r5_usbmsc_defconfig: Enable DWC3 wrapper for SPLRavi Gunasekaran
commit 280f45d23977 ("configs: get rid of build warnings due to SPL_USB_DWC3_GENERIC") missed enabling DWC3 glue layer for usbmsc_defconfig and this broke boot from USB mass storage. Fix this by enabling DWC3 glue layer. Fixes: 280f45d23977 ("configs: get rid of build warnings due to SPL_USB_DWC3_GENERIC") Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
2023-09-22x86: coreboot: Enable VIDEO_COPYSimon Glass
At least on modern machines the write-back mechanism for the frame buffer is quite slow when scrolling, since it must read the entire frame buffer and write it back. Enable the VIDEO_COPY feature to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22x86: coreboot: Align options between coreboot and coreboot64Simon Glass
These two builds are similar but have some different options for not good reason. Line them up to be as similar as possible. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22x86: coreboot: Enable CONFIG_SYS_NS16550_MEM32Simon Glass
The debug UART on modern machines uses a 32-bit wide transfer. Without this, setting debug output causes a hang or no output. It is not obvious (when enabling CONFIG_DEBUG_UART) that this is needed. Enable 32-bit access to avoid this trap. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 12:11:57 +0000