aboutsummaryrefslogtreecommitdiff
path: root/drivers/clk/sifive
AgeCommit message (Collapse)Author
2024-05-20Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"Tom Rini
As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07clk: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-07-06clk: sifive: only build sifive-prci.o for CONFIG_CLK_SIFIVE_PRCIBen Dooks
If we're building non FU540/FU740 SoC drivers, then the sifive-prci.o is not needed. Only build this when CONFIG_CLK_SIFIVE_PRCI is selected. Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-09-06dt-bindings: clock: sifive: sync FU740 PRCI clock binding headerIcenowy Zheng
This commit sychronizes the header file for FU740 PRCI clocks with the one from Linux 5.19. The constant values are the same, but all constant names are changed (most are just prefixed with FU740_). Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-10-20clk: sifive: Fix -Wint-to-pointer-cast warningBin Meng
dev_read_addr() returns a value of type fdt_addr_t which is a 64-bit address and pd->va is a pointer. In a 32-bit build, this causes the following warning seen when building sifive-prci.c: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Change to use dev_read_addr_ptr(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-06drivers: clk: sifive: fu740-prci: replace 'pciaux' with 'pcieaux'Green Wan
Replace 'pciaux' with 'pcieaux', including name string and function prefix. The old name string, 'pciaux', might cause an error if PCIe driver is changed to use clk_get_by_name() with 'pcieaux' to get clock. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-05-31drivers: clk: add fu740 supportGreen Wan
Add fu740 support. One abstract layer is added for supporting multiple chips such as fu540 and fu740. Signed-off-by: Green Wan <green.wan@sifive.com>
2021-01-05dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()Simon Glass
In the spirit of using the same base name for all of these related macros, rename this to have the operation at the end. This is not widely used so the impact is fairly small. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-15clk: sifive: Include device_compat.hSean Anderson
Necessary for dev_xxx. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-08-04sifive: reset: add DM based reset driver for SiFive SoC'sSagar Shrikant Kadam
PRCI module within SiFive SoC's has register with which we can reset the sub-systems within the SoC. The resets to DDR and ethernet sub systems within FU540-C000 SoC are active low, and are hold low by default on power-up. Currently these are directly asserted within prci driver via register read/write. With the DM based reset driver support here, we bind the reset driver with clock (prci) driver and assert the reset signals of both sub-system's appropriately. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-08-04fu540: prci: use common reset indexes defined in binding headerSagar Shrikant Kadam
Indexes of reset signals available in PRCI driver are also defined in include/dt-bindings/reset/sifive-fu540-prci.h. So use those instead of defining new ones again within the fu540-prci driver. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-06-04clk: sifive: fu540-prci: Release ethernet clock resetPragnesh Patel
U-Boot ethernet works with FSBL flow where releasing ethernet clock reset is part of FSBL itself but with the SPL, We need to release ethernet clock reset explicitly for U-Boot proper. With this change Release ethernet clock reset code in FSBL might not be needed or unaffected. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-04clk: sifive: fu540-prci: Add ddr clock initializationPragnesh Patel
Release ddr clock reset once clock is initialized Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04clk: sifive: fu540-prci: Add clock enable and disable opsPragnesh Patel
Added clock enable and disable functions in prci ops Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-07-19clk: sifive: Drop GEMGXL clock driverAnup Patel
The GEMGXL clock driver is now directly part of Cadence MACB ethernet driver in upstream Linux kernel. There is no separate GEMGXL clock driver in upstream Linux kernel hence we drop GEMGXL clock driver from U-Boot as well. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19clk: sifive: Sync-up main driver with upstream LinuxAnup Patel
The DT bindings of SiFive clock driver in upstream Linux has changes. As-per latest DT bindings, the clock driver takes two parent clocks and compatible string has also changed. This patch sync-up SiFive clock driver implementation as-per upstream Linux so that we now use latest DT bindings. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19clk: sifive: Sync-up DT bindings header with upstream LinuxAnup Patel
The location and license header of DT bindings header for SiFive clock driver has changed in upstream Linux hence this patch. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19clk: sifive: Sync-up WRPLL library with upstream LinuxAnup Patel
Now that SiFive clock driver is merged in upstream Linux, we sync-up WRPLL library used by SiFive clock driver with upstream Linux sources. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19clk: sifive: Factor-out PLL library as separate moduleAnup Patel
To match SiFive clock driver with latest Linux, we factor-out PLL library as separate module under drivers/clk/analogbits. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-06-01clk: sifive: Add clock driver for GEMGXL MGMTBin Meng
This adds a clock driver to support the GEMGXL management IP block found in FU540 SoCs to control GEM TX clock operation mode for 10/100/1000 Mbps. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-05-09clk: sifive: fu540-prci: Change include orderJagan Teki
Like clk_get_by_index, there is requirement for clk_get_by_index_nodev. In this case to make common code functionalities for dev and nodev, clk_get_by_index is trying to get the index of clock by passing ofnode instead of actual dev like current gpio uclass does. In these scenarios with current order of include files the fu540-prci driver is unable to find CONFIG_ENV_SIZE. In file included from arch/riscv/include/asm/u-boot.h:23:0, from include/dm/of.h:10, from include/dm/ofnode.h:12, from include/clk.h:11, from include/clk-uclass.h:13, from drivers/clk/sifive/fu540-prci.c:32: include/environment.h:145:19: error: 'CONFIG_ENV_SIZE' undeclared here (not in a function); did you mean 'CONFIG_CMD_XIMG'? #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE) So, fix consists of changing the order of include files in fu540-prci.c to include first common.h file. Cc: Anup Patel <Anup.Patel@wdc.com> Cc: Rick Chen <rick@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-02-27clk: Add SiFive FU540 PRCI clock driverAnup Patel
Add driver code for the SiFive FU540 PRCI IP block. This IP block handles reset and clock control for the SiFive FU540 device and implements SoC-level clock tree controls and dividers. Based on code written by Wesley Terpstra <wesley@sifive.com> found in commit 999529edf517ed75b56659d456d221b2ee56bb60 of: https://github.com/riscv/riscv-linux Boot and PLL rate change were tested on a SiFive HiFive Unleashed board. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 14:05:48 +0000